Specifications:

  • Brand New Steering & Suspension Kit
  • Comes as a Set of 15
    • Fits LH (Driver Side) & RH (Passenger Side)
  • Direct replacements
  • Built to strict quality control standards

Our steering and suspension components come pre-greased, sealed for long life, and do not require the extra maintenance typically required by greasable versions.

Please Note: Whenever replacing steering components, it is highly recommended to have a professional alignment performed on the vehicle afterwards.  Failure to do so may result in issues with steering and premature tire wear.

Direct Fit

All parts are direct fit, application-specific parts with no modifications required

Rigorously Tested

Rigorously tested and made from higher quality materials than the competition. Our parts are built to have a longer life in any environment or road conditions.

State of the Art Manufacturing

Our parts are manufactured by some of the same factories that the OEMs use.

Prepackaged for Your Convenience

Our kits have been carefully put together to include all of the parts you need to get the job done, saving you both time and money. These kits also help take the guesswork out of finding the correct part for your vehicle’s steering or suspension system, allowing you to get started on your repair project faster.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Remove the wheel (1:00)
    • Loosen the lug nuts.
    • Raise and secure the vehicle
    • Remove the lug nuts and the wheel.
  2. step : Remove the front shield (1:15)
    • Use a 15 mm socket and ratchet.
    • Remove the four bolts.
  3. step : Remove the Idler Arm (1:25)
    • Remove the 24 mm bolt securing the idler arm to the steering linkage
    • Use a joint fork and a hammer to separate the joint.
    • Remove the three other bolts securing the idler arm.
    • Use a Tie Rod Puller to pull apart the idler arm and the idler shaft.
  4. step : Install the new idler arm (4:34)
    • Assemble your new idler arm to your idler shaft, threading on the bushing and nut.
    • Bolt in the idler arm assembly into place, tightening up the three nuts.
    • Bolt in the end of the idler arm assembly to the steering gear.
    • Torque the nuts and bolts to 80 ft lbs.
    • Install the cotter pin.
    • Use a grease gun and fill the grease fitting.
  5. step : Reassembly (7:25)
    • Replace the shield with the four 15mm bolts.
    • Clip the air bag harness back in.
    • Put the wheel back on and lower the car
    • Using a star pattern torque the lug nuts to 120-140 ft lbs

Tools needed for replacement:

    General Tools

  • Hammer
  • Jack Stands
  • Large C-Clamp

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • Ratchet
  • Socket Extensions
  • Torque Wrench

  • Sockets - Metric

  • 15mm Socket
  • 18mm Socket
  • 19mm Socket
  • 22mm Socket
  • 24mm Socket

  • Specialty Tools

  • Grease Gun
  • Tie Rod Fork
  • Tie Rod Puller

  • Wrenches - Metric

  • 18mm Wrench

4.5 / 5.0
2 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
1
1
0
0
0
So far so good!
The only problem I had was two different orders were placed in the same box! Front end and steering for two different vehicles! I spent about an hour separating the two different orders for each vehicle!
July 13, 2017
Purchased
10 months ago
Terrance Huff
A1 is the best online parts store i use for all 6 of my vehicles great prices and fast shipping. Cannot say enough great things about this company !
March 23, 2018
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 2 questions Browse 2 questions and 2 answers
Will this fit my 96 2wd c1500?
Chris A on Nov 12, 2017
BEST ANSWER: Yes, according to the information you supplied, the part you’re looking at will be correct for your vehicle. If you have any other questions or would like to place an order with one of our customer service representatives, please feel free to give us a call.
Will this fit 2wd sierra gmc 1500?
The Vine on Dec 13, 2017
BEST ANSWER: These parts will fit the 2WD older body style GMC C1500 series. Your Sierra may be a package, but we recommend confirming the C1500 or Sierra 1500 model with use of your VIN.

Vehicle Fit

  • 1993-1999 Chevy C1500 Truck 15 Piece Set Steering & Suspension Kit
  • 1993-2000 Chevy C2500 Truck 7200LB GVW 15 Piece Set Steering & Suspension Kit for Models with 6 Lug Wheels
  • 1993-1999 Chevy Suburban C1500 15 Piece Set Steering & Suspension Kit
  • 1995-1999 Chevy Tahoe 2 Wheel Drive Steering & Suspension Kit 15 Piece Set
  • 2000 Chevy Tahoe 2 Wheel Drive 15 Piece Set Steering & Suspension Kit V8 5.7L
  • 1993-1999 GMC C1500 Truck 15 Piece Set Steering & Suspension Kit
  • 1993-2000 GMC C2500 Truck 7200LB GVW 15 Piece Set Steering & Suspension Kit for Models with 6 Lug Wheels
  • 1993-1999 GMC Suburban C1500 15 Piece Set Steering & Suspension Kit
  • 1995-1999 GMC Yukon 2 Wheel Drive 15 Piece Set Steering & Suspension Kit

This part replaces:

  • Moog ES2004S
  • Moog K6292
  • Moog K6447
  • Moog K6335
  • Moog ES2836RL
  • Moog K6445
  • Moog ES2837RL
  • Moog K5252
  • Moog K6532
  • OE # 26048561, 7839709, 8260485610
  • OE # 26051896
  • OE # 26059031
Part #: 1ASFK01252


How-to Video:

(08:13 min)