Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Quantity:   14 Piece Set
  • Kit Includes:
      (2) Front Lower Forward Control Arms with Ball Joints
      (2) Front Upper Control Arms with Ball Joints
      (2) Front Outer Tie Rods
      (2) Front Sway Bar Links
      (2) Front Lower Rearward Control Arms
      (2) Front Inner Tie Rods
      (2) Front Lower Adjustable Ball Joints

Specifications:

  • Brand New Steering & Suspension Kit
  • Direct replacements
  • Built to strict quality control standards

Our steering and suspension components come pre-greased, sealed for long life, and do not require the extra maintenance typically required by greasable versions.

An adjustable ball joint will look slightly different than a standard, non-adjustable version.  The stud will be offset once installed and can be rotated in order to allow a greater range of vehicle suspension alignment.

Direct Fit

Application-specific, with no modifications required.

Rigorously Tested

Made from higher quality materials than the competition. Built to have a longer life in any environment or road conditions.

State of the Art Manufacturing

By the same factories that the OEMs use.

Prepackaged for Your Convenience

Carefully assembled to include all of the parts you need, saving time and money.

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Note: When replacing steering components, it is recommended to have a professional alignment performed on the vehicle afterwards. This will ensure proper tracking and even tire wear.

  1. step : Removing the Wheel (0:56)
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Control Arm (1:23)
    • Remove the 18mm bolt and washers from the control arm with an 18mm socket and breaker bar and 21mm wrench
    • Loosen the 22mm nut on the bottom of the ball joint with a socket and breaker bar
    • When the nut is flush with the end of the bolt, hit the nut with a hammer
    • Remove the nut with a 6mm Allen key
    • Pull the ball joint up and out
    • Pry the control arm out of the subframe with a pry bar
  3. step : Installing the Control Arm (4:55)
    • Insert the lower control arm into place
    • Insert the 18mm bolt and washers into the control arm but do not tighten all the way
    • Insert the ball joint into the knuckle
    • Push down on the ball joint and tighten the nut, and use an Allen key if necessary
    • Tighten the 21mm ball joint nut to 50 foot-pounds and add 90 degrees
    • Use a jack to push up on the lower control arm to put the weight of the vehicle on the suspension OR
    • Complete step 4 before continuing
    • Torque the 18mm bolt to 130 foot-pounds
    • Remove the jack
  4. step : Reattaching the Wheel (8:24)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 110 foot-pounds in a crossing or star pattern

Tools needed for replacement:

    Allen Wrenches

  • 6mm Allen Wrench

  • General Tools

  • Jack Stands
  • Hammer
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Rust Penetrant
  • Safety Glasses
  • Gloves

  • Ratchets & Related

  • Ratchet
  • Torque Wrench
  • Socket Extensions
  • 1/2 Inch Breaker Bar

  • Sockets - Metric

  • Complete Metric Socket Set

  • Wrenches - Metric

  • 21mm wrench
  • 22mm Wrench

4.50/ 5.0
4 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
3
0
1
0
0
Fit like a glove
I had the car on jacks remove the old parts and installed the new ones as soon as got the new parts and they fit like a glove thanks my car runs like new
March 3, 2017
Steering and front suspension parts (Dodge Challenger)
Parts arrived in the time frame anticipated I was amazed at the warranty offer as well as the price of the parts so far no complaints other than the parts arrived in a boxed that looked like it fell out the truck and got rammed over but all the parts was accounted for and in good condition. Time will be the answer on how well the parts hold up the other good thing I can say is lifetime warranty on the parts is something you cant beat. Anyone willing to stick that kind of warranty on parts must have a good to decent product.
July 7, 2017
2010 charger front suspension kit
I was skeptical at first because the price was so cheap"221.00 for over 1000.00 dollars worth of parts" but everything fit great, parts feel like high quality. Parts have only been installed for a couple days but so far so good, time will tell. But overall very happy with the product, quick shipping and I am looking at getting front struts for the same vehicle" 136.00 for both front quick struts" I give them thumbs up and would recommend them to other people
September 24, 2017
wrong ball joints
All suspension parts received fit perfectly except the lower ball joints were incorrect type. The ball joints supplied were not the center type nail joint. I had to purchase one from Orielly.
June 13, 2018
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
Does this fit 2005 chrysler 300c srt8 models?
Mike W December 31, 2016
Will it fit my 07 srt8?
Jayson H July 17, 2017
If your vehicle is a RWD and not AWD these will fit.
Alex P July 17, 2017
Well these fit a 2010 dodge charger SRT8?
Steven L September 30, 2017
These are specific for rear wheel drive models only. As long as you have a rear wheel drive model it will fit.
Tim K October 3, 2017
Is the Rear Wheel Drive 14 Piece Set Steering & Suspension Kit for the 2005 Chrysler 300 the same as that of the C model?
Charles M November 10, 2017
Yes, I put this package into a 2005 Chrysler 300C.
Derek B November 10, 2017
Yes it’s the same.
Derek D November 10, 2017
IF ITS REAR WHEEL DRIVE NOT ALL WHEEL DRIVE
TIMOTHY S November 10, 2017
Yes, as long as your 300C is RWD and not AWD.
Alex P November 10, 2017
Year Make Model Description
2005-2010Chrysler 300 Chrysler 300 Rear Wheel Drive 14 Piece Set Steering & Suspension Kit
2008-2010Dodge Challenger Dodge Challenger 14 Piece Set Steering & Suspension Kit
2006Dodge Charger Dodge Charger 14 Piece Set Steering & Suspension Kit
2007-2010Dodge Charger Dodge Charger Rear Wheel Drive 14 Piece Set Steering & Suspension Kit
2005-2008Dodge Magnum Dodge Magnum Rear Wheel Drive 14 Piece Set Steering & Suspension Kit
Part #: 1ASFK01239


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(08:50 min)