Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Quantity:   10 Piece Set
  • Kit Includes:
      (2) Front Lower Ball Joints
      (1) Pitman Arm
      (2) Front Outer Tie Rods
      (2) Front Upper Ball Joints
      (1) Idler Arm
      (2) Front Inner Tie Rods

Specifications:

  • Brand New Steering & Suspension Kit
  • Comes as a 10 Piece Kit
    • Fits LH (Driver Side) & RH (Passenger Side)
  • Direct replacements
  • Built to strict quality control standards

Our steering and suspension components come pre-greased, sealed for long life, and do not require the extra maintenance typically required by greasable versions.

Direct Fit

Application-specific, with no modifications required.

Rigorously Tested

Made from higher quality materials than the competition. Built to have a longer life in any environment or road conditions.

State of the Art Manufacturing

By the same factories that the OEMs use.

Prepackaged for Your Convenience

Carefully assembled to include all of the parts you need, saving time and money.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Note: When replacing steering components, it is recommended to have a professional alignment performed on the vehicle afterwards. This will ensure proper tracking and even tire wear.

  1. step : Diagnosis (1:15)
    • To check to see if you have a bad pitman arm, jack up your car and secure it.
    • Move your wheel and if there is play in your pitman arm and joint.
  2. step : Remove the skid plate (1:55)
    • Unbolt the four 15 mm bolts.
    • Remove the kid plate and set aside.
  3. step : Prepare the steering box to access the pitman arm (2:10)
    • Unclip and move aside the plastic shield.
    • Spray the two fittings and the bolt with penetrating oil.
    • Loosen the power steering coupling bolt.
    • Use a fitting wrench to remove the two fittings and an 11 mm socket and ratchet and extension to remove the bolt.
    • Have a helper hold the steering wheel for you while you do this to make it easier.
    • Use a pry bar to move the steering shaft from the steering box.
  4. step : Remove the steering box and pitman arm (4:35)
    • Use a 21 mm bolt to remove the bolt mounting the pitman arm.
    • Use a joint fork and a hammer to separate the joint.
    • Remove the three bolts securing the steering box and remove the steering box completely to remove the pitman arm.
    • Put the steering box and pit man arm in an oil pan.
    • Use an impact wrench or a large breaker bar as well as a pitman arm puller to remove the pitman arm from the steering arm.
  5. step : For reinstallation please see part 2 (8:10)

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Assistant
  • Hammer
  • Drain Pan
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Rust Penetrant

  • Ratchets & Related

  • Ratchet
  • 1/2 Inch Breaker Bar
  • Socket Extensions

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 34mm Socket
  • 15mm Socket
  • 21mm Socket
  • 11mm Socket

  • Specialty Tools

  • Pitman Arm Puller

  • Wrenches - Metric

  • 18mm Wrench

4.50/ 5.0
2 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
1
0
0
0
88 Chevy
Parts arrived within time that were scheduled to arrive all parts where exact fit for truck good quality parts
May 13, 2018
Parts ordered
We needed to change out front top and bottom ball joints on our 1992 Chevy 1500 truck. Instead of getting the ball joints we were offered a complete set for front suspension at a very good low price. We received the order in a good timely matter. Thank you A1.
October 31, 2018
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
I have an 89 gmc suburban, 4x4 and has a lift on it. I think maybe a 4" lift. Will this set help me rebuild the steering components or do I need a specific set because the lift that I have?
Cauner J May 23, 2017
Our parts are made to be used on factory applications up to a 2" lift. Anything more will require parts made for a lift.
Tim K May 24, 2017
I have a 92 silverado with 6" bds lift,, all the parts fit fine, just keep in mind these are not moog, so they wont hold up as long.
Jason M January 9, 2018
Parts will work fine. Lift isnt a concern. Plenty of rod on the tierod to suffice.
Jim G October 23, 2018
It does come with a self ajusting link... But it may not extend that far..
B L November 13, 2018
Year Make Model Description
1988-1992Chevy C1500 Truck Chevy C1500 Truck 10 Piece Set Steering & Suspension Kit
1988-1992Chevy C2500 Truck Chevy C2500 Truck 7200LB GVW for Models with 6 Lug Wheels 10 Piece Set Steering & Suspension Kit
1992Chevy Suburban C1500 Chevy Suburban C1500 10 Piece Set Steering & Suspension Kit
1988-1992GMC C1500 Truck GMC C1500 Truck 10 Piece Set Steering & Suspension Kit
1988-1992GMC C2500 Truck GMC C2500 Truck 7200LB GVW for Models with 6 Lug Wheels 10 Piece Set Steering & Suspension Kit
1992GMC Suburban C1500 GMC Suburban C1500 10 Piece Set Steering & Suspension Kit
Part #: 1ASFK01169


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(08:32 min)