Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Specifications:

  • Brand New Steering & Suspension Kit
  • Comes as an 11 Piece Kit
    • Fits LH (Driver Side) & RH (Passenger Side)
  • Direct replacements
  • Built to strict quality control standards
  • Fit 4WD (Four Wheel Drive) Models only
  • Fit models with 4 Groove Pitman Arm only

Our steering and suspension components come pre-greased, sealed for long life, and do not require the extra maintenance typically required by greasable versions.

Direct Fit

Application-specific, with no modifications required.

Rigorously Tested

Made from higher quality materials than the competition. Built to have a longer life in any environment or road conditions.

State of the Art Manufacturing

By the same factories that the OEMs use.

Prepackaged for Your Convenience

Carefully assembled to include all of the parts you need, saving time and money.

Part Details

  • Kit Includes: (2) Front Lower Ball Joints
  • Kit Includes: (1) Pitman Arm
  • Kit Includes: (2) Front Outer Tie Rods
  • Quantity: 11 Piece Set
  • Kit Includes: (2) Front Upper Ball Joints
  • Kit Includes: (1) Idler Arm Bracket
  • Kit Includes: (1) Idler Arm
  • Kit Includes: (2) Front Inner Tie Rods

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Note: When replacing steering components, it is recommended to have a professional alignment performed on the vehicle afterwards. This will ensure proper tracking and even tire wear.

  1. step : Remove the wheel (1:30)
    • Loosen the lug nuts.
    • Raise and secure the vehicle.
    • Remove the wheel.
  2. step : Remove the tie rod assembly (2:00)
    • Remove the tie rod bolt.
    • Use a pickle fork and hammer to separate it.
    • Use an adjustable wrench and a fitted wrench to remove the tie rod assembly.
  3. step : Install the new tie rod assembly (4:00)
    • Adjust your new tie rod assembly to match the old one for a preliminary alignment.
    • Mount the new tie rod assembly and tighten it in with a wrench.
    • Tighten the nut on the tie rod stud to 65 ft lbs.
    • Install the cotter pin.
    • Use a 7 mm wrench to install the grease fitting
    • With a grease gun, grease the inner and outer joints.
  4. step : Put the wheel back on (7:00)
    • Preliminarily tighten the lug nuts.
    • Lower the car and torque the lug nuts to 120 ft lbs using a star pattern.

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Jack Stands
  • Rubber Mallet

  • Pliers, Cutters & misc Wrenches

  • Adjustable Wrench
  • Lug Wrench
  • Needle nose pliers

  • Ratchets & Related

  • Ratchet
  • Torque Wrench

  • Sockets - Metric

  • 35mm Socket
  • 7mm Socket

  • Specialty Tools

  • Grease Gun
  • Tie Rod Fork
  • Tie Rod Puller

5.00/ 5.0
1review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
0
0
0
0
Super quality and fast shipping.A*
Highly recommended. Super quality and fast free shipping. A+
October 7, 2018
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
What brand are these parts?
Matthew G March 23, 2016
Im not actually sure but very pleased have had them on for ahile and they have held up well
Larry G March 23, 2016
No name, but ive had them on my vehicle with no issues in almost a year
Christopher A March 23, 2016
Installed all this stuff in my truck last year. Not idea of the brand but nothing has been replaced yet. I take my truck out in the wood and beat on it so that should give you and idea of durability.
Jeremiah C March 24, 2016
We have a few different aftermarket companies build these parts specifically for us, as our 1A Auto house brand. They are manufactured to the same OEM specifications as the original part that came with your vehicle and are covered by a lifetime warranty. If you have any further questions, please dont hesitate to ask.
Brian F March 24, 2016
Why do the outer tie rods come with a washer, am I suppose to use it with this kit?, if so do I use it under the castellated nut or for the jam nut?? Or dont use it at all, cause my vehicle doesnt have a washer ?
Brad Y December 30, 2016
Unless your vehicle was equipped with a washer, you should not need to use it. Using just the castle nut and cotter pin will be the proper replacement. It appears that some vehicles that these parts work for required a washer due to the placement, but you should follow the direction of your OEM set up.
Alex P December 30, 2016
can you request and order Moog brand upper and lower ball joints in this kit?, and if so what is the additional cost
Marco D April 23, 2017
Thank you for your interest in this kit, but that is not something we can accommodate. If we offer Moog ball joints you will have to purchase them separately.
Tim K April 23, 2017
Year Make Model Description
2002-2006Cadillac Escalade Cadillac Escalade 11 Piece Set Steering & Suspension Kit 4 Groove Pitman Arm
2003-2006Cadillac Escalade ESV Cadillac Escalade ESV 11 Piece Set Steering & Suspension Kit 4 Groove Pitman Arm
2002-2006Cadillac Escalade EXT Cadillac Escalade EXT 11 Piece Set Steering & Suspension Kit 4 Groove Pitman Arm
2002-2006Chevy Avalanche 1500 Chevy Avalanche 1500 11 Piece Set Steering & Suspension Kit 4 Groove Pitman Arm
1999-2003Chevy Silverado 1500 Chevy Silverado 1500 4 Wheel Drive 11 Piece Set Steering & Suspension Kit 4 Groove Pitman Arm
2004-2006Chevy Silverado 1500 Chevy Silverado 1500 (excluding Crew Cab) 4 Wheel Drive 11 Piece Set Steering & Suspension Kit 4 Groove Pitman Arm
2007Chevy Silverado 1500 Classic Chevy Silverado 1500 Classic (excluding Crew Cab) 4 Wheel Drive 11 Piece Set Steering & Suspension Kit 4 Groove Pitman Arm
2005-2006Chevy Suburban 1500 Chevy Suburban 1500 11 Piece Set Steering & Suspension Kit 4 Groove Pitman Arm
2000Chevy Tahoe Chevy Tahoe Steering & Suspension Kit (excluding Z71 Models) 11 Piece Set 4 Groove Pitman Arm
2001-2006Chevy Tahoe Chevy Tahoe 11 Piece Set Steering & Suspension Kit 4 Groove Pitman Arm
1999-2003GMC Sierra 1500 GMC Sierra 1500 4 Wheel Drive Steering & Suspension Kit 11 Piece Set 4 Groove Pitman Arm
2004-2006GMC Sierra 1500 GMC Sierra 1500 (excluding Crew Cab) 4 Wheel Drive 11 Piece Set Steering & Suspension Kit 4 Groove Pitman Arm
2007GMC Sierra 1500 Classic GMC Sierra 1500 Classic (excluding Crew Cab) 4 Wheel Drive 11 Piece Set Steering & Suspension Kit 4 Groove Pitman Arm
2000GMC Yukon GMC Yukon Steering & Suspension Kit (excluding Denali Models) 11 Piece Set 4 Groove Pitman Arm
2001-2006GMC Yukon GMC Yukon 11 Piece Set Steering & Suspension Kit 4 Groove Pitman Arm
2000-2006GMC Yukon XL 1500 GMC Yukon XL 1500 11 Piece Set Steering & Suspension Kit 4 Groove Pitman Arm
Part #: 1ASFK01087


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(07:45 min)