Specifications:

  • Brand New Steering & Suspension Kit
  • Comes as a 12 Piece Kit
    • Fits LH (Driver Side) & RH (Passenger Side)
  • Direct replacements
  • Built to strict quality control standards

Our steering and suspension components come pre-greased, sealed for long life, and do not require the extra maintenance typically required by greasable versions.

Direct Fit

Application-specific, with no modifications required.

Rigorously Tested

Made from higher quality materials than the competition. Built to have a longer life in any environment or road conditions.

State of the Art Manufacturing

By the same factories that the OEMs use.

Prepackaged for Your Convenience

Carefully assembled to include all of the parts you need, saving time and money.

Part Details

  • Quantity: 12 Piece Set
  • Kit Includes: (2) Front Lower Ball Joints
  • Kit Includes: (1) Pitman Arm
  • Kit Includes: (2) Front Outer Tie Rods
  • Kit Includes: (2) Front Sway Bar Links
  • Kit Includes: (2) Front Upper Ball Joints
  • Kit Includes: (1) Idler Arm
  • Kit Includes: (2) Front Inner Tie Rods

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Please Note: Whenever replacing steering components, it is highly recommended to have a professional alignment performed on the vehicle afterwards.  Failure to do so may result in issues with steering and premature tire wear.

  1. step : Remove the wheel (1:30)
    • Loosen the lug nuts.
    • Raise and secure the vehicle.
    • Remove the wheel.
  2. step : Remove the tie rod assembly (2:00)
    • Remove the tie rod bolt.
    • Use a pickle fork and hammer to separate it.
    • Use an adjustable wrench and a fitted wrench to remove the tie rod assembly.
  3. step : Install the new tie rod assembly (4:00)
    • Adjust your new tie rod assembly to match the old one for a preliminary alignment.
    • Mount the new tie rod assembly and tighten it in with a wrench.
    • Tighten the nut on the tie rod stud to 65 ft lbs.
    • Install the cotter pin.
    • Use a 7 mm wrench to install the grease fitting
    • With a grease gun, grease the inner and outer joints.
  4. step : Put the wheel back on (7:00)
    • Preliminarily tighten the lug nuts.
    • Lower the car and torque the lug nuts to 120 ft lbs using a star pattern.

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Jack Stands
  • Rubber Mallet

  • Pliers, Cutters & misc Wrenches

  • Adjustable Wrench
  • Lug Wrench
  • Needle nose pliers

  • Ratchets & Related

  • Ratchet
  • Torque Wrench

  • Sockets - Metric

  • 35mm Socket
  • 7mm Socket

  • Specialty Tools

  • Grease Gun
  • Tie Rod Fork
  • Tie Rod Puller

3.8 / 5.0
4 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
2
0
1
1
0
works great
i didnt know how off my steering was until i put these parts on my car, lol
March 12, 2018
Purchased
5 months ago
Good Quality, Low Cost
Parts fit perfectly! Came fast and so easy to install. Saved me $700 in labor costs and $300 in parts. 1AAuto is now my numbers #1 place to buy all my vehicles parts !!!
October 11, 2017
Purchased
10 months ago
not the greatest quality
Parts fit but there are not the greatest quality, I guess that is what is expected for the price you pay for the kit.
August 26, 2017
Purchased
1 year ago
Not quite right
Shipped quick. Rebuilt the whole front end on my sons 2000 Silverado. Took the truck in for an alignment and the pitman arm wasn't correct. Instead of a $75 alignment it cost $376. They installed a moog pitman arm that fit and then did the alignment. The angle was wrong on the one that came in the set I bought. This shop has never done me wrong. Very honest and fair priced. Truck works good now just wish all the parts were right.
June 17, 2017
Purchased
1 year ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 5 questions Browse 5 questions and 6 answers
Will this kit work for a 2004 chevy tahoe 4x4?
Clint K on May 8, 2016
BEST ANSWER: Yes, according to the information you supplied, the part you���re looking at will be correct for your vehicle. If you have any other questions or would like to place an order with one of our customer service representatives, please feel free to give us a call.
Can this part work on a Cadillac Escalade 02 all wheel ?
Turtle on Jun 9, 2018
BEST ANSWER: Yes, according to the information you supplied, the part you're looking at will be correct for your vehicle. The only thing you would have to verify is whether or not you have a 3 or 4 groove pitman arm.
Are they good quality OE style or a bit less poor?
Elgil on Mar 17, 2017
BEST ANSWER: We have a few different aftermarket companies build these parts specifically for us. They are manufactured to the same OEM specifications as the original part that came with your vehicle, so the quality will be the same!
Are these Moog parts?
Dan W on Mar 22, 2016
BEST ANSWER: We have a few different aftermarket companies build these parts specifically for us, as our 1A Auto house brand. They are manufactured to the same OEM specifications as the original part that came with your vehicle and are covered by a lifetime warranty. If you have any further questions, please don't hesitate to ask.
Can you grease these?
Julian M on Aug 30, 2015
BEST ANSWER: Yes.....Ball joints and outer tie rods have grease fitting

Vehicle Fit

Year Make Model Description
2002-2006Cadillac Escalade Cadillac Escalade 12 Piece Set Steering & Suspension Kit 4 Groove Pitman Arm
2003-2006Cadillac Escalade ESV Cadillac Escalade ESV 12 Piece Set Steering & Suspension Kit 4 Groove Pitman Arm
2002-2006Cadillac Escalade EXT Cadillac Escalade EXT 12 Piece Set Steering & Suspension Kit 4 Groove Pitman Arm
2002-2006Chevy Avalanche 1500 Chevy Avalanche 1500 12 Piece Set Steering & Suspension Kit 4 Groove Pitman Arm
1999-2006Chevy Silverado 1500 Chevy Silverado 1500 4 Wheel Drive 12 Piece Set Steering & Suspension Kit for Models 4 Groove Pitman Arm without Rack & Pinion Steering
2007Chevy Silverado 1500 Classic Chevy Silverado 1500 Classic 4 Wheel Drive 12 Piece Set Steering & Suspension Kit for Models 4 Groove Pitman Arm without Rack & Pinion Steering
2000-2006Chevy Suburban 1500 Chevy Suburban 1500 12 Piece Set Steering & Suspension Kit for Models with 4 Groove Pitman Arm
2000Chevy Tahoe Chevy Tahoe 12 Piece Set Steering & Suspension Kit for Models with 4 Groove Pitman Arm (excluding Z71 Models)
2001-2006Chevy Tahoe Chevy Tahoe 12 Piece Set Steering & Suspension Kit 4 Groove Pitman Arm
1999-2006GMC Sierra 1500 GMC Sierra 1500 4 Wheel Drive 12 Piece Set Steering & Suspension Kit for Models with 4 Groove Pitman Arm without Rack & Pinion Steering
2007GMC Sierra 1500 Classic GMC Sierra 1500 Classic 4 Wheel Drive 12 Piece Set Steering & Suspension Kit for Models with 4 Groove Pitman Arm without Rack & Pinion Steering
2000GMC Yukon GMC Yukon 12 Piece Set Steering & Suspension Kit for Models with 4 Groove Pitman Arm (excluding Denali Models)
2001-2006GMC Yukon GMC Yukon 12 Piece Set Steering & Suspension Kit for Models with 4 Groove Pitman Arm
2000-2006GMC Yukon XL 1500 GMC Yukon XL 1500 12 Piece Set Steering & Suspension Kit for Models with 4 Groove Pitman Arm

This part replaces:

  • OE # 15295861, 26059210
  • OE # 12475478
  • OE # 19149615
  • OE # 12471379
  • OE # 19149617
  • OE # 12475486
  • Moog ES3493T
  • Moog K6541
  • Moog K6540
  • Moog K80631
  • Moog ES3488
  • Moog K6534
  • Moog K6536
Part #: 1ASFK00650


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(07:45 min)