Specifications:

  • Brand New Steering & Suspension Kit
  • Comes as a 10 Piece Kit
    • Fits LH (Driver Side) & RH (Passenger Side)
  • Direct replacement
  • Built to strict quality control standards

Our steering and suspension components come pre-greased, sealed for long life, and do not require the extra maintenance typically required by greasable versions.

Direct Fit

Application-specific, with no modifications required.

Rigorously Tested

Made from higher quality materials than the competition. Built to have a longer life in any environment or road conditions.

State of the Art Manufacturing

By the same factories that the OEMs use.

Prepackaged for Your Convenience

Carefully assembled to include all of the parts you need, saving time and money.

Part Details

  • Kit Includes: (2) Front Lower Ball Joints
  • Kit Includes: (2) Front Lower Control Arms
  • Kit Includes: (2) Front Outer Tie Rods
  • Kit Includes: (2) Front Sway Bar Links
  • Quantity: 10 Piece Set
  • Kit Includes: (2) Front Inner Tie Rods

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Please Note: Whenever replacing steering components, it is highly recommended to have a professional alignment performed on the vehicle afterwards.  Failure to do so may result in issues with steering and premature tire wear.

  1. step : Removing the Wheel (0:38)
    • Loosen the 21mm lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Pull off the hub cap
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Control Arm (3:26)
    • Remove the two 17mm nuts connecting the ball joint to the control arm
    • Remove the 17mm bolt connecting the ball joint to the control arm
    • Separate the ball joint from the control arm with a pry bar
    • Remove the two 19mm bolts from the front of the control arm
    • Remove the 19mm bolt from the rear of the control arm
    • Remove the control arm with a pry bar
  3. step : Installing the Control Arm (6:25)
    • Put the rear control arm bushing into place
    • Start the 19mm bolt into the control arm bushing
    • Position the control arm, using a pry bar if necessary
    • Insert the longer 19mm bolt into the rear of the control arm bracket
    • Insert the shorter 19mm bolt into the front of the control arm bracket
    • Pry the control arm into place
    • Fasten the 17mm nuts onto the ball joint bracket
    • Insert the 17mm bolt into the ball joint bracket
    • Tighten the two 17mm nuts to 94 foot-pounds of torque
    • Tighten the 17mm bots to 94 foot-pounds
    • Tighten the three 19mm bolts to 152 foot-pounds
  4. step : Reattaching the Wheel (9:12)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts 76 foot-pounds in a crossing or star pattern
    • Reattach the center cap

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Floor Jack

  • Ratchets & Related

  • Ratchet
  • Torque Wrench
  • Socket Extensions
  • 1/2 Inch Breaker Bar

  • Screwdrivers & Related

  • Pry Bar

  • Sockets - Metric

  • 21mm Socket
  • 22mm Socket
  • 19mm Socket
  • 17mm Socket
  • 12mm Socket

5.0 / 5.0
3 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
3
0
0
0
0
Perfect parts, came in really fast and fit our car perfectly defiantly ordering from here again!
January 29, 2018
Purchased
7 months ago
Great parts
Love it. Great deal and parts right to my door . I was very happy and so was my customer. I installed them with no problem. Thanks and keep up the great service!?
July 6, 2017
Purchased
1 year ago
Great! Everything fits correctly and the video and tech help is good!
June 30, 2017
Purchased
1 year ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 1992-1996 Lexus ES300 10 Piece Set Steering & Suspension Kit
  • 1995-1996 Toyota Avalon 10 Piece Set Steering & Suspension Kit
  • 1992-1996 Toyota Camry 10 Piece Set Steering & Suspension Kit

This part replaces:

  • Moog K9499
  • Moog EV301
  • Moog ES3306
  • Moog K90124
  • Moog K620051
  • Moog K620052
  • Dorman 520-405
  • Dorman 520-406
  • Hollander 512-58289L; 512-58385AL
  • Hollander 512-58289R; 512-58385AR
  • OE # 48069-33020; 48069-33031
  • OE # 48820-33010
  • OE # 4333039435
  • OE # 48068-33020; 48068-33031
  • OE # 4504629255
  • OE # 4550339135, 4550329355
Part #: 1ASFK00607


Order must be placed by 4pm ET

How-to Video:

(11:29 min)