Specifications:

  • Brand New Steering & Suspension Kit
  • Comes as a 12 Piece Kit
    • Fits LH (Driver Side) & RH (Passenger Side)
  • Direct replacements
  • Built to strict quality control standards

Our steering and suspension components come pre-greased, sealed for long life, and do not require the extra maintenance typically required by greasable versions.

Please Note: Whenever replacing steering components, it is highly recommended to have a professional alignment performed on the vehicle afterwards.  Failure to do so may result in issues with steering and premature tire wear.

Direct Fit

All parts are direct fit, application-specific parts with no modifications required

Rigorously Tested

Rigorously tested and made from higher quality materials than the competition. Our parts are built to have a longer life in any environment or road conditions.

State of the Art Manufacturing

Our parts are manufactured by some of the same factories that the OEMs use.

Prepackaged for Your Convenience

Our kits have been carefully put together to include all of the parts you need to get the job done, saving you both time and money. These kits also help take the guesswork out of finding the correct part for your vehicle’s steering or suspension system, allowing you to get started on your repair project faster.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (0:47)
    • Pry off the wheel cover by hand
    • Loosen the lug nut covers with a 21mm socket
    • Pull off the center cap
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Outer Tie Rod (1:19)
    • Turn the brake rotor by hand or turn the steering wheel to turn the rotor
    • Loosen the tie rod with an adjustable wrench
    • Straighten out the castle nut pin with pliers
    • Remove the pin
    • Remove the 21mm castle nut from the ball joint
    • Strike the wheel knuckle with a hammer to loosen the tie rod end
    • Pull the tie rod out of the wheel knuckle
    • Measure the distance from the base of the inner tie rod to the end of the outer tie rod
    • Note that measurement
    • Twist off the outer tie rod
  3. step : Installing the Outer Tie Rod (2:39)
    • Twist the outer tie rod onto the inner tie rod
    • Measure the distance from the base of the inner tie rod to the end of the outer tie rod
    • This should be the same as the measurement from Step 2
    • Push the ball joint into the steering knuckle
    • Fasten the castle nut onto the ball joint
    • Push the pin through the castle nut
    • Bend the pin into place with pliers
    • Tighten the tie rod with an adjustable wrench
  4. step : Reattaching the Wheel (4:09)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern
    • Reattach the center cap
    • Tighten the lug nut covers with a 21mm socket
    • Push on the wheel cover

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Hammer
  • Jack Stands

  • Pliers, Cutters & misc Wrenches

  • Adjustable Wrench
  • Needle nose pliers

  • Ratchets & Related

  • A Piece of Pipe (for leverage)
  • Ratchet
  • Torque Wrench

  • Sockets - Metric

  • 21mm Socket
  • 7mm Socket

5.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
1
0
0
0
0
2001 Chevy front end suspension kit
Person who helped me was very polite and helpful. I would definitely continue to shop with you guys. Thank you
April 3, 2018
Purchased
2 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 5 questions Browse 5 questions and 11 answers
What name brand are the parts?
jamie h on Feb 21, 2016
BEST ANSWER: We have a few different aftermarket companies build these parts specifically for us, as our 1A Auto house brand. They are manufactured to the same OEM specifications as the original part that came with your vehicle and are covered by a lifetime warranty. If you have any further questions, please don't hesitate to ask.
do these parts have to be greased?
courtney d on Oct 16, 2016
BEST ANSWER: after installation you need to grease them with a quality high pressure grease
What is 3 grove pitman arm?
Sam T on Sep 28, 2017
BEST ANSWER: A 3 groove pitman arm will have three grooves or solid lines within the splined section. On these types of vehicles there were either a 3 groove or 4 groove. If you are unsure it is recommended to contact the dealership with your VIN number to confirm.
Will this fit my 2004 silverado crew can non hd 2wd?
Mark M on Jan 8, 2018
BEST ANSWER: Thanks for your question! This will only fit the vehicles they are listed for. Thank you!
What type of grease do u recommend?
Nolan H on Jan 7, 2017
BEST ANSWER: Lucius Red

Vehicle Fit

  • 2002-2006 Chevy Avalanche 2500 Steering & Suspension Kit 12 Piece Set
  • 2001-2003 Chevy Silverado 1500 HD Steering & Suspension Kit 12 Piece Set
  • 2005-2006 Chevy Silverado 1500 HD Steering & Suspension Kit 12 Piece Set
  • 2007 Chevy Silverado 1500 HD Classic Steering & Suspension Kit 12 Piece Set
  • 2001-2004 Chevy Silverado 2500 with 3 Groove Pitman Arm Steering & Suspension Kit 12 Piece Set
  • 2001-2006 Chevy Silverado 2500 HD with 3 Groove Pitman Arm Steering & Suspension Kit 12 Piece Set
  • 2007 Chevy Silverado 2500 HD Classic with 3 Groove Pitman Arm Steering & Suspension Kit 12 Piece Set
  • 2001-2006 Chevy Silverado 3500 Steering & Suspension Kit 12 Piece Set
  • 2007 Chevy Silverado 3500 Classic Steering & Suspension Kit 12 Piece Set
  • 2001-2006 Chevy Suburban 2500 Steering & Suspension Kit 12 Piece Set
  • 2001-2003 GMC Sierra 1500 HD Steering & Suspension Kit 12 Piece Set
  • 2005-2006 GMC Sierra 1500 HD Steering & Suspension Kit 12 Piece Set
  • 2007 GMC Sierra 1500 HD Classic Steering & Suspension Kit 12 Piece Set
  • 2001-2004 GMC Sierra 2500 with 3 Groove Pitman Arm Steering & Suspension Kit 12 Piece Set
  • 2001-2006 GMC Sierra 2500 HD with 3 Groove Pitman Arm Steering & Suspension Kit 12 Piece Set
  • 2007 GMC Sierra 2500 HD Classic with 3 Groove Pitman Arm Steering & Suspension Kit 12 Piece Set
  • 2001-2006 GMC Sierra 3500 Steering & Suspension Kit 12 Piece Set
  • 2007 GMC Sierra 3500 Classic Steering & Suspension Kit 12 Piece Set
  • 2001-2006 GMC Yukon XL 2500 with 3 Groove Pitman Arm Steering & Suspension Kit 12 Piece Set
  • 2003-2007 Hummer H2 with 3 Groove Pitman Arm Steering & Suspension Kit 12 Piece Set

This part replaces:

  • OE # 10385580
  • OE # 12479051
  • OE # 12542993
  • OE # 12546193
  • OE # 15070821
  • OE # 15167767
  • OE # 15295861
  • OE # 15835052
  • OE # 15840266
  • OE # 15891515
  • OE # 15891516
  • OE # 26059210
  • Moog ES3609
  • Moog K6535
  • Moog K80631
  • Moog K6693
  • Moog K6654
  • Moog ES3488
  • Moog K6696
  • Hollander 2700-326620
  • OE # 15295861, 26059210
  • OE # 25905442
Part #: 1ASFK00497


How-to Video:

(04:55 min)