Part Details

  • Bearing Type: Ball Bearing
  • Quantity: 4 Piece Set
  • Kit Includes:
    (1) Front Outer Tie Rod
    (1) Front Driver Side CV Axle
    (1) Front Lower Ball Joint
    (1) Front Hub Assembly

Specifications:

  • Brand New Steering & Suspension Kit
  • Comes as a 4 Piece Kit
    • Fits LH (Driver Side) Front
  • Direct replacements
  • Built to strict quality control standards

Our steering and suspension components come pre-greased, sealed for long life, and do not require the extra maintenance typically required by greasable versions.

Direct Fit

Application-specific, with no modifications required.

Rigorously Tested

Made from higher quality materials than the competition. Built to have a longer life in any environment or road conditions.

State of the Art Manufacturing

By the same factories that the OEMs use.

Prepackaged for Your Convenience

Carefully assembled to include all of the parts you need, saving time and money.

Item Condition: New

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Note: When replacing steering components, it is recommended to have a professional alignment performed on the vehicle afterwards. This will ensure proper tracking and even tire wear.

  1. step : Remove the wheel and tire (1:30)
    • Raise and secure the vehicle.
    • Remove the lug nuts and then the wheel.
  2. step : Remove Caliper (2:00)
    • Turn wheels all the way in the opposite direction of the side you are working on.
    • Use your 15mm socket wrench to remove the caliper bolts.
    • Use a wire tie to help prevent stress on the caliper.
  3. step : Remove brake disk (2:44)
    • Take care not to touch the disk, and if you do make sure to clean it with rubbing alcohol or mineral spirits.
  4. step : Remove Hub (2:56)
    • Remove the 3 bolts securing the hub using your 13mm socket and 3/8 extension and ratchet or breaker bar.
    • You can use penetrating oil to help.
    • Use a 35mm socket to remove the hub nut.
    • Give the axle a slight tap with a hammer to loosen it.
    • Use a rubber mallet to break it free, and work around the flange with the hammer to pull it off.
    • Leave the top 13mm loosely still in to prevent the hub from flying out if you hit it too hard.
    • Remove the hub, using driving tools to help work it out of the steering knuckle.
    • Clean up any corrosion with a wire brush.
  5. step : Install new hub (8:30)
    • Use some penetrating oil to prep the knuckle for the new hub.
    • Watch part 2 to install your new 1A Auto hub!

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Hammer
  • Jack Stands
  • Rubber Mallet

  • Materials, Fluids, and Supplies

  • Rust Penetrant

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • Ratchet
  • Socket Extensions
  • Torque Wrench

  • Screwdrivers & Related

  • Phillips Head Screwdriver

  • Sockets - Metric

  • 13mm Socket
  • 19mm Socket
  • 32mm Socket
  • 35mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

Year Make Model Description
1997-1999Buick Century Buick Century Steering & Suspension Kit 4 Piece Set Driver Side for Models with ABS Brakes
1997Buick Regal Buick Regal Steering & Suspension Kit 4 Piece Set Driver Side for Models with ABS Brakes (excluding Supercharged Models)
1997-1998Chevy Venture Chevy Venture Front Wheel Drive Steering & Suspension Kit 4 Piece Set Driver Side for Models with ABS Brakes
1997-1998Oldsmobile Silhouette Olds Silhouette Steering & Suspension Kit 4 Piece Set Driver Side for Models with ABS Brakes
1997Pontiac Grand Prix Pontiac Grand Prix Steering & Suspension Kit 4 Piece Set Driver Side for Models with ABS Brakes (excluding Supercharged Models)
1998-1999Pontiac Grand Prix Pontiac Grand Prix Steering & Suspension Kit 4 Piece Set Driver Side V6 3.1L with ABS Brakes
1997-1998Pontiac Trans Sport Pontiac Trans Sport Steering & Suspension Kit 4 Piece Set Driver Side for Models with ABS Brakes

This part replaces:

  • A1 Cardone 66-1249
  • Dorman 4110309
  • Hollander 538-01680B
  • Hollander 447-02274L
  • Moog ES3453
  • Moog K5331
  • Dorman 951-016
  • Reference Number 513121
  • OE # 88955451
  • OE # 12429204
  • OE # 7470017
  • OE # 88965333
  • OE # 22157089
  • OE # 26047918
Part #: 1AAHK00026

Out of Stock

How-to Video:

(09:37 min)