Specifications:

  • Brand New Steering & Suspension Kit
  • Comes as a 10 Piece Kit
    • Fits LH (Driver Side) & RH (Passenger Side)
  • Direct replacements
  • Built to strict quality control standards

Our steering and suspension components come pre-greased, sealed for long life, and do not require the extra maintenance typically required by greasable versions.

Direct Fit

Application-specific, with no modifications required.

Rigorously Tested

Made from higher quality materials than the competition. Built to have a longer life in any environment or road conditions.

State of the Art Manufacturing

By the same factories that the OEMs use.

Prepackaged for Your Convenience

Carefully assembled to include all of the parts you need, saving time and money.

Part Details

  • Kit Includes: (2) Front Lower Ball Joints
  • Kit Includes: (2) Front Outer Tie Rods
  • Kit Includes: (2) Front CV Axles
  • Kit Includes: (2) Front Hub Assemblies
  • Kit Includes: (2) Front Upper Ball Joints
  • Quantity: 10 Piece Set

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Please Note: Whenever replacing steering components, it is highly recommended to have a professional alignment performed on the vehicle afterwards.  Failure to do so may result in issues with steering and premature tire wear.

  1. step : Removing the Wheel (0:48)
    • Removing the Wheel
    • Loosen the lug nut covers with a 22mm socket
    • Pry off the center cap with a flat blade screwdriver
    • Loosen the 35mm nut but don't remove it
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Stabilizer Link (1:32)
    • Using locking pliers to clip onto the top of the stabilizer link
    • Then remove 14mm bolt from bottom of the stabilizer link
    • Remove the stabilizer link with a hammer or reciprocating saw
  3. step : Removing the Axle (2:41)
    • Use a pry bar to hold the hub in place
    • Loosen and remove the 15mm bolts
    • Hammer the axle over to the side to release it
    • Pull it straight back and out of the wheel and down and out
  4. step : Reinstalling the Axle (3:34)
    • Feed the axle into the place
    • Line up the back and replace the 15mm bolts
    • Use a pry bar to hold the hub in place
    • Torque each bolt to 65 ft/lbs
  5. step : Replacing the Stabilizer Link (4:51)
    • Put the stabilizer piece back into place
    • Use four washers, four grommets, and a tube
    • Use a jack stand to help push it through till it appears through the top
    • Tighten the 14mm bolt on the stabilizer link
    • Tighten until the bushings are the same diameter as the washers
  6. step : Replacing the Wheel (6:18)
    • Replace and tighten the 35mm nut
    • Put the tire in place
    • Replace and tighten each lug nut
    • Torque each lug nut in a crossing pattern to 100 ft/lbs
    • Torque the center hub nut to 160 ft/lbs
    • Replace the hub cap and tighten the lug nut caps

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Sawzall

  • Pliers, Cutters & misc Wrenches

  • Vise Grip Pliers

  • Ratchets & Related

  • Ratchet
  • Socket Extensions
  • Torque Wrench

  • Screwdrivers & Related

  • Pry Bar

  • Sockets - Metric

  • 14mm Socket
  • 15mm Socket
  • 22mm Socket
  • 35mm Socket
  • 36mm Socket

4.5 / 5.0
4 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
3
0
1
0
0
Front suspension kit
Great service fast shipping and exact fit for my truck I would use A1 Auto for all my purchases next time 100% satisfied
March 16, 2017
Purchased
1 year ago
Steering and Front Suspension kit
Awesome way to purchase what you need in a kit. I would recommend this to anyone if you upgrade the ball joints and outer tie rods. The boot on the upper ball joint will not stay on and the nuts for the outer tie rods stripped out when tightening up and wasn't even up far enough to put the pin in. I had to go buy Moog for these two parts and wish you all would adding that to this package. Everything else seems good at this time.
March 5, 2017
Purchased
1 year ago
Awesome front end kit
This is a great front end kit for a great price. Also, I thought they would all be non greaseable parts, to my surprise there good quality parts. Another thing is, the shipping was good and fast. Living here in Canada and it only took seven working days for all parts to arrive. Finnally, with 10,000km on the parts and counting there's absolutely no problems, thanks 1A auto for the great quality parts and service.
February 15, 2017
Steering & Suspension Kit Front
Did very well explaining the installation and removal of the Steering and Suspension.
January 26, 2017
Purchased
1 year ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 4 questions Browse 4 questions and 6 answers
What brand are the hub assemblies?
Spartyfan85 on Aug 16, 2016
BEST ANSWER: Sorry, didn't notice any brand marking. They did, however, go on without any drama.
Only thing different is that the hub faces did not have the tapped hole for the Torx bolt that holds the brake disk to the hub when the wheel is off. Since the lug nuts hold it all together when in service, I found this to be a non issue.
Would this fit my 2003 tahoe z71?
Juanc on Mar 1, 2018
BEST ANSWER: This part is specific to vehicles with a particular set of options. We will need more information about your vehicle to confirm the fit. Please feel free to call our customer service department for clarification @ 888-844-3393.
How long is limited lifetime warranty ?
Don H on Jan 19, 2018
BEST ANSWER: The limited lifetime warranty is covered for as long as you own the vehicle.
Does this kit for a 2002 Yukon Denali as well or do you have a similar set that does?
Chris F on Mar 18, 2017
BEST ANSWER: This part will fit a 2002 GMC Yukon Denali 4WD. It will not fit the longer, "XL" models.

Vehicle Fit

  • 2002-2006 Cadillac Escalade All Wheel Drive Front Steering & Suspension Kit 10 Piece Set
  • 2003-2006 Cadillac Escalade ESV All Wheel Drive Front Steering & Suspension Kit 10 Piece Set
  • 2002-2006 Cadillac Escalade EXT All Wheel Drive Front Steering & Suspension Kit 10 Piece Set
  • 2002-2006 Chevy Avalanche 1500 4 Wheel Drive Front Steering & Suspension Kit 10 Piece Set
  • 1999-2003 Chevy Silverado 1500 (excluding Crew Cab) 4 Wheel Drive Front Steering & Suspension Kit 10 Piece Set
  • 2004-2006 Chevy Silverado 1500 4 Wheel Drive 6 Lug Wheels Front Steering & Suspension Kit 10 Piece Set
  • 2007 Chevy Silverado 1500 Classic 4 Wheel Drive 6 Lug Wheels Front Steering & Suspension Kit 10 Piece Set
  • 2001-2006 Chevy Suburban 1500 4 Wheel Drive Front Steering & Suspension Kit 10 Piece Set
  • 2000 Chevy Tahoe 4 Wheel Drive (excluding Z71 Models) Front Steering & Suspension Kit 10 Piece Set
  • 2001-2006 Chevy Tahoe 4 Wheel Drive Front Steering & Suspension Kit 10 Piece Set
  • 1999-2003 GMC Sierra 1500 (excluding Crew Cab) 4 Wheel Drive Front Steering & Suspension Kit 10 Piece Set
  • 2004-2006 GMC Sierra 1500 4 Wheel Drive 6 Lug Wheels Front Steering & Suspension Kit 10 Piece Set
  • 2007 GMC Sierra 1500 Classic 4 Wheel Drive 6 Lug Wheels Front Steering & Suspension Kit 10 Piece Set
  • 2000 GMC Yukon (excluding Denali Models) 4 Wheel Drive Front Steering & Suspension Kit 10 Piece Set
  • 2001-2006 GMC Yukon 4 Wheel Drive Front Steering & Suspension Kit 10 Piece Set
  • 2000-2006 GMC Yukon XL 1500 4 Wheel Drive Front Steering & Suspension Kit 10 Piece Set

This part replaces:

  • A1 Cardone 66-1009
  • Moog ES3493T
  • Moog K6541
  • Moog K6540
  • Dorman 951-008
  • Hollander 447-02433
  • Hollander 538-01481
  • OE # 12475478
  • OE # 19149617
  • OE # 12475486
  • OE # 26069252
  • OE # 15112382
  • Reference Number 515036
Part #: 1ASFK02173

How-to Video:

(07:40 min)