Replaces

Steering, Suspension, & Brake Kit - 1ASFK05645

Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Bearing Type:   Ball Bearing
  • Quantity:   21 Piece Set
  • Kit Includes:
      (2) Front Sway Bar Links
      (2) Front Lower Ball Joints
      (2) Front CV Axles
      (2) Front Outer Tie Rods
      (1) Idler Arm
      (1) Pitman Arm
      (2) Front Inner Tie Rods
      (2) Tie Rod Adjusting Sleeves
      (1) Front Ceramic Brake Pad Set
      (2) Front Upper Control Arms with Ball Joints
      (2) Front Wheel Bearings
      (2) Front Replacement Brake Rotors
  • Brake Pad Features & Benefits:
      Positive Mold Technology
      Thermal Scorched

 

Direct Fit

Application-specific, with no modifications required.

Rigorously Tested

Made from higher quality materials than the competition. Built to have a longer life in any environment or road conditions.

State of the Art Manufacturing

By the same factories that the OEMs use.

Prepackaged for Your Convenience

Carefully assembled to include all of the parts you need, saving time and money.

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Note: When replacing steering components, it is recommended to have a professional alignment performed on the vehicle afterwards. This will ensure proper tracking and even tire wear.

  1. step : Remove the wheel and tire (1:00)
    • Loosen your hub nut with your 35 mm socket.
    • Loosen your lug nut with your 19 mm lug wrench.
    • Raise and secure the vehicle.
    • Remove the lug nuts and then the wheel, remove the hub nut.
  2. step : Remove Brake Caliper (2:17)
    • Turn wheels all the way in the opposite direction of the side you are working on.
    • Use your 18 mm socket wrench to remove the caliper bolts.
    • Use a wrench to pry the caliper off.
    • Use a wire tie to help prevent stress on the caliper.
  3. step : Remove Brake Rotor (2:58)
    • Take care not to touch the disk, and if you do make sure to clean it with rubbing alcohol or mineral spirits.
  4. step : Remove Hub (3:04)
    • Remove the clips for the hub harness.
    • Use a screwdriver to unclip the hub harness.
    • Unbolt the hub harness.
    • Remove the 3 bolts securing the hub using your 18mm socket and ratchet or breaker bar.
    • You can use penetrating oil to help.
    • Remove the hub, using driving tools to help work it out of the steering knuckle.
    • Clean up any corrosion with a wire brush.
  5. step : Install new hub (6:45)
    • Use some penetrating oil to prep the knuckle for the new hub.
    • Put the three 18mm bolts in place and tighten the nuts to 65 ft lbs.
  6. step : Put brakes and wheel back on (6:45)
    • Refer to our other videos for more detailed instructions.
    • Remember to replace the lug nuts on in a star pattern.
    • Lug nuts tighten to 95 ft lbs
    • Hub nut is 75 ft lbs.
    • Make sure to check your brakes and steering before driving again.
    • Make sure to have the vehicle aligned.

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Jack Stands
  • Wire Brush

  • Materials, Fluids, and Supplies

  • Anti-Seize Grease
  • Rust Penetrant

  • Pliers, Cutters & misc Wrenches

  • Lug Wrench

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • Ratchet
  • Torque Wrench

  • Screwdrivers & Related

  • Pry Bar

  • Sockets - Metric

  • 10mm Socket
  • 11mm Socket
  • 12mm Socket
  • 13mm Socket
  • 14mm Socket
  • 15mm Socket
  • 16mm Socket
  • 17mm Socket
  • 18mm Socket
  • 19mm Socket
  • 35mm Socket

  • Wrenches - Metric

  • 13mm Wrench
  • 18mm Wrench

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
1998Chevy Blazer S10 Chevy Blazer S10 4 Wheel Drive (excluding ZR2 Models) 21 Piece Set Steering, Suspension, & Brake Kit for Models with Offset Tie Rod
1999-2005Chevy Blazer S10 Chevy Blazer S10 4 Wheel Drive (excluding ZR2 Models) 21 Piece Set Steering, Suspension, & Brake Kit
1998Chevy S10 Pickup Chevy S10 Pickup 4 Wheel Drive (excluding ZR2 Models) 21 Piece Set Steering, Suspension, & Brake Kit for Models with Offset Tie Rod
1999-2004Chevy S10 Pickup Chevy S10 Pickup 4 Wheel Drive (excluding ZR2 Models) 21 Piece Set Steering, Suspension, & Brake Kit
1998GMC Jimmy S-15 GMC Jimmy S-15 4 Wheel Drive (excluding ZR2 Models) 21 Piece Set Steering, Suspension, & Brake Kit for Models with Offset Tie Rod
1999-2001GMC Jimmy S-15 GMC Jimmy S-15 4 Wheel Drive (excluding ZR2 Models) 21 Piece Set Steering, Suspension, & Brake Kit
1999-2004GMC S-15 Sonoma GMC S-15 Sonoma 4 Wheel Drive (excluding ZR2 Models) 21 Piece Set Steering, Suspension, & Brake Kit
1998Isuzu Hombre Isuzu Hombre 4 Wheel Drive Steering, Suspension, & Brake Kit 21 Piece Set for Models with Offset Tie Rod
1999-2000Isuzu Hombre Isuzu Hombre 4 Wheel Drive 21 Piece Set Steering, Suspension, & Brake Kit
1999-2001Oldsmobile Bravada Olds Bravada 4 Wheel Drive 21 Piece Set Steering, Suspension, & Brake Kit
Part #: 1ASFK05645

Out of Stock

How-to Video:

(07:28 min)