Please Note: Whenever replacing steering components, it is highly recommended to have a professional alignment performed on the vehicle afterwards.  Failure to do so may result in issues with steering and premature tire wear.

Positive Mold Technology

Positive Mold Technology improves durability and performance by allowing for even wear. High density, low resin friction material virtually eliminates brake fade and glazing, generates less brake dust, and promotes a longer-lasting , better performing brake pad.

Thermal Scorched

Pre-burnishing or "Thermal Scorching" is the final curing step in quality ceramic brake pad manufacturing. The brake pad's surface is heated to remove any uncured bonding agents and to stabilize the friction material to accelerate the break-in process and enhance stopping performance from the first stop.

Direct Fit

All parts are direct fit, application-specific parts with no modifications required

Rigorously Tested

Rigorously tested and made from higher quality materials than the competition. Our parts are built to have a longer life in any environment or road conditions.

State of the Art Manufacturing

Our parts are manufactured by some of the same factories that the OEMs use.

Prepackaged for Your Convenience

Our kits have been carefully put together to include all of the parts you need to get the job done, saving you both time and money. These kits also help take the guesswork out of finding the correct part for your vehicle’s steering or suspension system, allowing you to get started on your repair project faster.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

    NOTE: After completing the procedure you will need a professional alignment

  1. step : Removing the Wheel (0:47)
    • Loosen the 22mm caps on the hubcap with the vehicle on the ground
    • Pull the hubcap free
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Upper Control Arm (1:10)
    • Mark the tab on the adjustment piece with a marker to mark the alignment
    • Remove the two 10mm bolts holding the brake line and move the brackets
    • Remove the ball joint nut with an 18mm wrench
    • Hit the wheel knuckle and control arm to break them free
    • Remove the 21mm nuts from the upper control arm bracket
    • Jack up the wheel underneath the wheel knuckle
    • Remove the upper control arm nut
    • Remove the bolts and upper control arm bracket
    • Place a nut back on and use an air hammer to knock the bolt out if it won't budge
    • Move the control arm up and down while pulling out
  3. step : Installing the Upper Control Arm (3:52)
    • Put the upper control arm into place and push the 21mm bolts in to hold it
    • Put the brackets on either side and realign them up
    • Angle the control arm down into the wheel knuckle
    • Replace the 18mm ball joint nut
    • Replace the 21mm nuts from the upper control arm bracket
    • Replace and tighten the two 10mm bolts
    • Put a grease gun into place on the end of the control arm and fill it up
  4. step : Reattaching the Wheel (6:00)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 ft/lbs in a crossing or star pattern
    • Reattach the hubcap and tighten the caps

Tools needed for replacement:

    General Tools

  • Hammer
  • Jack Stands

  • Materials, Fluids, and Supplies

  • Marker / Writing Utensil

  • Ratchets & Related

  • Ratchet
  • Torque Wrench

  • Sockets - Metric

  • 10mm Socket
  • 21mm Socket
  • 22mm Socket

  • Specialty Tools

  • Grease Gun

  • Wrenches - Metric

  • 18mm Wrench
  • 21mm wrench

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 2 questions Browse 2 questions and 2 answers
What brand parts are these in this kit?
Shane D on Mar 15, 2018
BEST ANSWER: We have a few different aftermarket companies build these parts specifically for us, as our 1A Auto house brand. They are manufactured to the same OEM specifications as the original part that came with your vehicle. If you have any further questions, please don't hesitate to ask.
Do ball joints have grease fittings?
Flip02 on Mar 14, 2018
BEST ANSWER: These items are not greaseable. Thanks!!

Vehicle Fit

  • 2002-2006 Cadillac Escalade All Wheel Drive with 4 Groove Pitman Arm 20 Piece Set Steering, Suspension, & Brake Kit
  • 2003-2006 Cadillac Escalade ESV All Wheel Drive with 4 Groove Pitman Arm 20 Piece Set Steering, Suspension, & Brake Kit
  • 2002-2006 Cadillac Escalade EXT All Wheel Drive with 4 Groove Pitman Arm 20 Piece Set Steering, Suspension, & Brake Kit
  • 2002-2006 Chevy Avalanche 1500 4 Wheel Drive with 4 Groove Pitman Arm Steering, Suspension, & Brake Kit 20 Piece Set
  • 1999-2000 Chevy Silverado 1500 4 Wheel Drive with 4 Groove Pitman Arm (excluding Crew Cab) 20 Piece Set Steering, Suspension, & Brake Kit
  • 2001-2003 Chevy Silverado 1500 4 Wheel Drive 6 Lug Wheels with 4 Groove Pitman Arm (excluding Crew Cab) 20 Piece Set Steering, Suspension, & Brake Kit
  • 2004 Chevy Silverado 1500 4 Wheel Drive 6 Lug Wheels with 4 Groove Pitman Arm 20 Piece Set Steering, Suspension, & Brake Kit
  • 2005-2006 Chevy Silverado 1500 4 Wheel Drive 6 Lug Wheels 4 Wheel Disc Brakes with 4 Groove Pitman Arm 20 Piece Set Steering, Suspension, & Brake Kit
  • 2007 Chevy Silverado 1500 Classic 4 Wheel Drive 6 Lug Wheels 4 Wheel Disc Brakes with 4 Groove Pitman Arm 20 Piece Set Steering, Suspension, & Brake Kit
  • 2000-2006 Chevy Suburban 1500 4 Wheel Drive with 4 Groove Pitman Arm 20 Piece Set Steering, Suspension, & Brake Kit
  • 2000 Chevy Tahoe 4 Wheel Drive with 4 Groove Pitman Arm (excluding Z71 Models) 20 Piece Set Steering, Suspension, & Brake Kit
  • 2001-2006 Chevy Tahoe 4 Wheel Drive with 4 Groove Pitman Arm 20 Piece Set Steering, Suspension, & Brake Kit
  • 1999-2000 GMC Sierra 1500 4 Wheel Drive with 4 Groove Pitman Arm (excluding Crew Cab) 20 Piece Set Steering, Suspension, & Brake Kit
  • 2001-2003 GMC Sierra 1500 4 Wheel Drive 6 Lug Wheels with 4 Groove Pitman Arm (excluding Crew Cab) 20 Piece Set Steering, Suspension, & Brake Kit
  • 2004 GMC Sierra 1500 4 Wheel Drive 6 Lug Wheels with 4 Groove Pitman Arm 20 Piece Set Steering, Suspension, & Brake Kit
  • 2005-2006 GMC Sierra 1500 4 Wheel Drive 6 Lug Wheels 4 Wheel Disc Brakes with 4 Groove Pitman Arm 20 Piece Set Steering, Suspension, & Brake Kit
  • 2007 GMC Sierra 1500 Classic 4 Wheel Drive 6 Lug Wheels 4 Wheel Disc Brakes with 4 Groove Pitman Arm 20 Piece Set Steering, Suspension, & Brake Kit
  • 2000 GMC Yukon 4 Wheel Drive with 4 Groove Pitman Arm (excluding Denali Models) 20 Piece Set Steering, Suspension, & Brake Kit
  • 2001-2006 GMC Yukon 4 Wheel Drive with 4 Groove Pitman Arm 20 Piece Set Steering, Suspension, & Brake Kit
  • 2000-2006 GMC Yukon XL 1500 4 Wheel Drive with 4 Groove Pitman Arm 20 Piece Set Steering, Suspension, & Brake Kit

This part replaces:

  • OE # 15134584
  • OE # 19149615
  • OE # 12542993
  • OE # 15102294
  • OE # 26069252
  • OE # 15295861
  • Dorman 520-116
  • OE # 15070821
  • OE # 15922557
  • Moog K80631
  • Moog K6534
  • Hollander 538-01481
  • OE # 15864153
  • Hollander 447-02433
  • OE # 26059210
  • Hollander 511-01044
  • OE # 15167767
  • OE # 15835052
  • OE # 15245582
  • OE # 12471379
  • OE # 18048101
  • OE # 10385580
  • OE # 12475485
  • OE # 12471378
  • OE # 12475478
  • Hollander 530-02040
  • OE # 26069244
  • OE # 15112382
  • Moog K6536
  • Moog K80942
  • Moog K6541
  • Moog K6723
  • OE # 15047200
  • OE # 12546193
  • OE # 19149617
  • Moog ES3493T
  • Moog ES3488
  • OE # 15840266
Part #: 1ASFK05644


How-to Video:

(07:07 min)