Specifications:

  • Brand New Starter
  • No core charge
  • Direct replacement
  • Built to strict quality control standards

This replacement starter is just what you need to get your vehicle in good working order again. If your starter is only clicking, or turning the engine very slowly, this Starter may be the solution for you.

Our electrical and electronic parts are subject to strict quality control testing. Please ensure proper diagnosis of this item before purchasing as the item cannot be returned once installed or plugged in.

Item Condition: New

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Disconnecting the Battery (0:44)
    • Loosen the negative battery clamp with an 8mm socket and ratchet
    • Disconnect the battery cable
    • Put the battery cable aside
  2. step : Removing the Starter (1:10)
    • Remove the 13mm nut from the starter ground
    • Pull off the ground strap
    • Allow the ground strap to hang aside
    • Pull the red cap off the starter studs
    • Remove the 13mm bolt from the starter solenoid
    • Remove the 10mm nut from the starter signal
    • Pull the starter signal and power starter wire off their studs
    • Now remove the 13mm bolts from the starter
    • Pull out the starter
  3. step : Installing the Starter (4:11)
    • Push the starter into place
    • Connect the starter power wire
    • Fasten the 13mm nut on the starter power wire
    • Connect starter signal wire
    • Fasten the 10mm nut onto the starter signal wire
    • Push the red cap onto the studs
    • Insert the two 13mm bolts for the starter
    • Connect the starter ground wire to the stud
    • Fasten the 13mm nut onto the ground
  4. step : Connecting the Battery (7:08)
    • Put the battery cable onto the terminal
    • Tighten the battery terminal clamp with an 8mm socket and ratchet

Tools needed for replacement:

    Ratchets & Related

  • 1/4 Inch Ratchet
  • Ratchet
  • Socket Extensions

  • Sockets - Metric

  • 8mm Socket
  • 10mm Socket
  • 13mm Socket

4.5 / 5.0
2 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
1
0
0
0
I order a Starter online, for an 1998 Mazda Pick-up
After I received my order in record time, I found out I had ordered the Wrong part, The customer service was very helpful in assisting me, She sent me a free return label for me to return the item and returned the correct part in less than 4 days. Very Impressed. Thank you for your professionalism and great service.
May 27, 2018
Purchased
6 months ago
Starter
I needed a starter for my 99 explorer! I ordered one from 1a auto! Just installed it seems to be of decent quality! I love the free shipping, and no tax policy! I am a returning customer!
October 6, 2017
Purchased
1 year ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

Year Make Model Description
1997Ford Aerostar Ford Aerostar Starter V6 4.0L
1997-2003Ford Explorer Ford Explorer Starter V6 4.0L with Automatic Transmission
2004-2006Ford Explorer Ford Explorer Starter V6 4.0L
1997-2004Ford Ranger Ford Ranger Starter V6 4.0L with Automatic Transmission
1998-2004Mazda B4000 Truck Mazda B4000 Truck Starter V6 4.0L with Automatic Transmission
1998-2006Mercury Mountaineer Mercury Mountaineer Starter V6 4.0L

This part replaces:

  • Lester 3273
Part #: 1AEST00118


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(07:29 min)