Part Details

  • Quantity: Pair
  • Vehicle Radio / Navigation Option: 6 x 9 Inch

Specifications:

  • Brand New Mopar Front Door Speaker Set
  • Comes as a Pair
    • Fits LH (Driver Side) & RH (Passenger Side) Front
  • For models with standard sound system
  • Original equipment parts
  • Direct replacements
  • Built to strict quality control standards
OEM Part

Genuine original equipment part (OEM) that was factory installed on your vehicle by the manufacturer.

Item Condition: New

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Door Panel (0:45)
    • Pry out the trim piece inside the door handle
    • Remove the Phillips screw behind the handle
    • Remove the tan circle clips by pressing in the center and prying out the clip
    • Remove the four Phillips head screws on the bottom of the panel
    • Pry out the panel below the door pull
    • Pry out the door panel with a door panel clip tool or putty knife
    • Release the door handle cable by popping the clip, rotating the handle, and popping the hook out
    • Disconnect the window switch wiring harnesses
    • Pop out the wire harness retainers
    • Unplug the courtesy light and its wire retainers
    • Lift the door panel up and off
  2. step : Removing the Speaker (3:19)
    • Pry off the speaker cover
    • Remove four Phillips screws from the speaker
    • Disconnect the speaker wiring lead
    • Pull off the speaker
  3. step : Installing the Speaker (4:42)
    • Connect the speaker wiring lead
    • Put the speaker into place
    • Insert the four Phillips screws into the speaker
  4. step : Installing the Door Panel (5:03)
    • Connect the courtesy light
    • Clip in the wire harness retainers
    • Connect the window switch wiring harnesses
    • Insert the latch rod into the door handle
    • Slide the clip over the latch rod
    • Lift the panel up over the door lock
    • Press the panel into place
    • Press the clips into the door panel
    • Tighten the four Phillips screws to the bottom of the panel
    • Tighten the Phillips screws beneath the door pull
    • Tighten the Phillips screw into the door handle
    • Press on the trim buttons

Tools needed for replacement:

    General Tools

  • Pick

  • Screwdrivers & Related

  • Phillips Head Screwdriver

  • Specialty Tools

  • Trim Tool Set

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

Year Make Model Description
2006-2010Chrysler 300 Chrysler 300 Front Door Mounted 6 x 9 Inch Speaker Pair for Models with Standard Sound System Mopar 5064035AB
2009-2017Dodge Challenger Dodge Challenger Front Door Mounted 6 x 9 Inch Speaker Pair for Models with Standard Sound System Mopar 5064035AB
2006-2010Dodge Charger Dodge Charger Front Door Mounted 6 x 9 Inch Speaker Pair for Models with Standard Sound System Mopar 5064035AB

This part replaces:

  • Mopar 5064035AB
  • OE # 5064035AB
Only 1 left in stock
Part #: MPIMK00042


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

Brand #: 5064035AB

How-to Video:

(07:03 min)