Replaces
This part doesn’t fit a . Select from parts that fit.
1A Auto Lifetime Warranty
Frequently bought together
Part Details
TRQ Wire Sets are precision engineered to keep your engine running like new. Wire Sets naturally wear out over time and should be replaced every 50,000 miles to keep your car running in peak performance, reduce emissions, and prevent any damage to your ECU or sensors. All products are fit and road-tested in our Massachusetts R&D facility to ensure we deliver on our promise of Trusted Reliable Quality.
Product Features
Item Condition:
New
Attention California Customers:
WARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
Returns: Parts with electrical components cannot be returned once installed.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
First you're gonna do is disconnect the spark plug wire from the spark plug. Just grab a hold of it, give it a twist, pull it. Disconnect from the coil same way. Twist and pull. You're gonna keep this heat shield. Just pull it. Set it aside. Twist on the new coil wire, spark plug wire. It comes pre-siliconed. Slide your old heat shield over it, right to the bottom. I like to put it right on the spark plug until it clicks in. Hear it? Then, line up the angle to the coil. Now, just repeat the procedure to the other seven cylinders.
Tools used
