Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (0:47)
    • Loosen the lug nuts
    • Raise and support the vehicle
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Rear Shock Absorber (1:56)
    • Remove the two 16mm bolts at the top of the shock absorber
    • Compress the shock
    • Pull out the top of the shock
    • Remove the bottom shock bolt with an 18mm wrench and a 15mm socket and ratchet
    • Pull out the shock
    • Hold the shock stud with vise grip pliers
    • Remove the 15mm nut from the top of the shock
    • Remove the shock mount from the shock
  3. step : Installing the Shock (4:46)
    • Remove the 15mm nut from the top of the new shock
    • Remove the washers from the new shock
    • Put the shock mount onto the new shock, with the rubber pointing out
    • Put the appropriate washer onto the shock stud
    • Fasten the 15mm nut onto the shock stud
    • Put the shock into place, top first
    • Compress the shock
    • Line up the shock with the lower control arm
    • Install the bottom shock bolt
    • Start the nut onto the bottom shock bolt
    • Fasten the bottom shock bolt with an 18mm wrench and a 15mm socket and ratchet
    • Tighten the bottom shock bolt to 53 foot-pounds of torque
    • Start the two 16mm bolts into the shock mount
    • Tighten the two 16mm bolts to 38 foot-pounds
  4. step : Installing the Wheel (6:40)
    • Put the wheel into place
    • Start the lug nuts
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 110 foot-pounds in a crossing pattern

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Rust Penetrant
  • Gloves

  • Pliers, Cutters & misc Wrenches

  • Vise Grip Pliers

  • Ratchets & Related

  • Ratchet
  • Torque Wrench
  • Socket Extensions
  • 1/2 Inch Breaker Bar

  • Sockets - Metric

  • 21mm Socket
  • 15mm Socket

  • Wrenches - Metric

  • 16mm Wrench
  • 17mm Wrench
  • 15mm Wrench
  • 18mm Wrench

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2005-2010 Chrysler 300 V6 2.7L without Nivomat Suspension Rear Shock Mount Kit Driver or Passenger Side
  • 2005-2010 Chrysler 300 V6 3.5L without Nivomat Suspension Rear Shock Mount Kit Driver or Passenger Side
  • 2005-2010 Chrysler 300 V8 5.7L without Nivomat Suspension Rear Shock Mount Kit Driver or Passenger Side
  • 2011-2018 Chrysler 300 Rear Shock Mount Kit Driver or Passenger Side
  • 2009-2010 Dodge Challenger V6 3.5L (excluding Performance Suspension) Rear Shock Mount Kit Driver or Passenger Side
  • 2009-2010 Dodge Challenger V8 5.7L (excluding Performance Suspension) Rear Shock Mount Kit Driver or Passenger Side
  • 2011-2012 Dodge Challenger V6 3.6L Rear Shock Mount Kit Driver or Passenger Side
  • 2011-2012 Dodge Challenger V8 5.7L Rear Shock Mount Kit Driver or Passenger Side
  • 2013-2018 Dodge Challenger Rear Shock Mount Kit Driver or Passenger Side
  • 2006-2010 Dodge Charger V6 2.7L without Nivomat Suspension Rear Shock Mount Kit Driver or Passenger Side
  • 2006-2010 Dodge Charger V6 3.5L without Nivomat Suspension Rear Shock Mount Kit Driver or Passenger Side
  • 2006-2010 Dodge Charger V8 5.7L without Nivomat Suspension Rear Shock Mount Kit Driver or Passenger Side
  • 2011-2018 Dodge Charger Rear Shock Mount Kit Driver or Passenger Side
  • 2005 Dodge Magnum Rear Shock Mount Kit Driver or Passenger Side
  • 2006-2008 Dodge Magnum V6 3.5L without Nivomat Suspension Rear Shock Mount Kit Driver or Passenger Side
  • 2006-2008 Dodge Magnum V8 5.7L without Nivomat Suspension Rear Shock Mount Kit Driver or Passenger Side
  • 2006-2008 Dodge Magnum V6 2.7L without Nivomat Suspension Rear Shock Mount Kit Driver or Passenger Side

This part replaces:

  • KYB SM5533
  • Monroe 905969
  • OE # 68042668AC
Only 2 left in stock
Part #: 1ASMX00501

How-to Video:

(07:10 min)