Replaces

2013-16 Complete Strut Assembly & Shock Absorber Kit TRQ SKA85602 - 1ASSP01554

Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Quantity:   4 Piece Set

In the past, replacing struts required specialized tools to compress, remove and transfer the old spring and mount.  Pre-assembled with all new parts, our complete strut and spring assemblies make this job much quicker and easier for the do-it-yourself mechanic.

Each complete strut & spring assembly contains:

  • Upper Strut Mount
  • Strut Bearing
  • Coil Spring
  • Boot & Bumper Kit
  • Gas-charged Strut 
Direct Fit

Fits and functions correctly.  Competitors combine applications to reduce the amount of parts they carry, resulting in: incorrect vehicle height, poor response and an uncomfortable ride.

Rigorously Tested

Made from higher quality materials than the competition. Built to have a longer life in any environment or road conditions.

Pre-Assembled

Loaded strut & spring assemblies allow for a quicker, safer install than bare struts.  No spring compressor required! 

Trouble-Free Install

Includes the matched parts needed. New components over reused parts provide a better ride and save you from having to repair again.

Matched Parts

Not all shocks and struts are manufactured the same.  Mixing and matching can result in ride quality issues and decrease the life of the parts.

Saves Time & Money

Over buying the parts individually, or having to search different parts that are correct for your vehicle (because we did it for you!)

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Wheel (0:29)
    • Use a 22mm socket and breaker bar to break the lug nuts loose
    • Raise and support the vehicle
    • Remove the lug nuts
    • Remove the wheel
  2. step : Removing the Old Shock Absorber (1:15)
    • Use an 21mm socket and ratchet to loosen the lower nut up
    • Remove the nut
    • Raise the control arm with a jack
    • Remove the bolt
    • Use the 18mm wrench to remove the upper nut
    • Hold the bolt with a 15mm wrench
    • Remove the nut and the bolt
    • Pull the shock absorber off the car (using a pry bar, if necessary)
  3. step : Reinstalling the New Shock Absorber (4:14)
    • Line up the new shock
    • Insert the shock into the upper bracket (use a hammer if necessary)
    • Insert the bolt and thread on the nut by hand
    • Line up the bottom of the shock and insert the washer between the shock and control arm
    • Insert the bottom bolt and the nut
    • Snug up the top and bottom nuts and bolts
    • Torque the bottom bolt to 74 ft-lbs
    • Remove the jack from the control arm
    • Torque it to 52 ft-lbs
  4. step : Reinstalling the Wheel (6:22)
    • Line up the wheel
    • Thread the lug nuts on by hand
    • Lower the car
    • Torque the lug nuts in a star pattern to 140 ft-lbs

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Floor Jack

  • Ratchets & Related

  • Torque Wrench
  • 1/2 Inch Breaker Bar

  • Sockets - Metric

  • 21mm Socket
  • 18mm Socket
  • 22mm Socket

  • Wrenches - Metric

  • 21mm wrench
  • 18mm Wrench

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2013-2016Buick Enclave Buick Enclave Front & Rear Complete Strut Assembly & Shock Absorber Kit 4 Piece Set TRQ SKA85602
2013-2016Chevy Traverse Chevy Traverse Front & Rear Complete Strut Assembly & Shock Absorber Kit 4 Piece Set TRQ SKA85602
2013-2016GMC Acadia GMC Acadia Front & Rear Complete Strut Assembly & Shock Absorber Kit 4 Piece Set TRQ SKA85602
Part #: 1ASSP01554


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

TRQ
Brand #: SKA85602

How-to Video:

(07:15 min)