In the past, replacing struts required specialized tools to compress, remove and transfer the old spring and mount.  Pre-assembled with all new parts, our complete strut and spring assemblies make this job much quicker and easier for the do-it-yourself mechanic.

Each complete strut & spring assembly contains:

  • Upper Strut Mount
  • Strut Bearing
  • Coil Spring
  • Boot & Bumper Kit
  • Gas-charged Strut 
Direct Fit

Direct fit replacement; not only will the part fit correctly, but it will function correctly.  Many competitors combine applications to cut down on the amount of parts they have to carry. This can result in the following issues: incorrect vehicle height, poor response and an uncomfortable ride.

Rigorously Tested

Rigorously tested and made from higher quality materials than the competition. Our parts are built to have a longer life in any environment or road conditions.

Pre-Assembled

Pre-assembled, loaded strut & spring assemblies allow for a quicker, safer install than replacing with just bare struts. 

Trouble-Free Install

Trouble-free install includes the matched parts needed to get the job done. New mounts, bearings, springs and hardware will provide a better ride for your vehicle and save you time from not having to do the job again because a used part failed afterwards.

Matched Parts

When you buy the kit pre-built by us, you can be sure that the parts are matched for optimum performance.  Not all shocks and struts are manufactured the same, so mixing and matching can result in fit issues and potentially decrease the life of the parts.

Saves Time & Money

When you buy one of our kits, you not only save money over buying the parts individually, but you also save time having to search for all of the different parts that are correct for your vehicle (because we did it for you!)

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (0:45)
    • Loosen the 19mm lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Wheel Well Liner (1:17)
    • Remove all of the fasteners out of the wheel well liner
    • Pry the fasteners out with a flat blade screwdriver
    • Remove the 10mm nut in the top of the wheel well
    • Remove the wheel well liner
  3. step : Removing the Shock Absorbers (2:14)
    • Remove the 18mm bolt at the top of the shock
    • Remove the 18mm bolt and nut at the bottom of the shock
  4. step : Installing the Shock Absorbers (3:51)
    • Insert the shock into place
    • Tighten the 18mm bolt at the bottom of the shock
    • Tighten the 18mm bolt at the top of the shock
    • Torque the top and bottom bolts to 81 foot-pounds
  5. step : Installing the Wheel Well Liner (5:04)
    • Insert the wheel well liner into place
    • Tighten the 10mm nut to the top of the wheel well
    • Press the fasteners into the liner
  6. step : Reattaching the Wheel (5:50)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Gloves
  • Dust Mask

  • Ratchets & Related

  • Torque Wrench
  • Socket Extensions
  • 1/2 Inch Breaker Bar

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Specialty Tools

  • Trim Tool Set

  • Wrenches - Metric

  • Complete Metric Wrench Set

4.5 / 5.0
2 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
1
1
0
0
0
Great product and install videos
Installed my new shocks and struts last weekend on my 2008 equinox which is the exact same vehicle that you use for the instructional video.It was much easier than I thought it would be.Also I got the wrong sway bar links and your customer service person said he would refund my purchase so I ordered the new ones.
March 15, 2018
Purchased
2 months ago
First purchase
1A auto delivered my order in a timely fashion and everything was delivered in good condition. The parts appear to be quality components and I will rate them after they have been in service for a few miles
April 23, 2018
Purchased
1 month ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2007-2009 Chevy Equinox Front & Rear Shock & Strut Kit 4 Piece Set V6 3.4L (excluding 19 Inch Wheels)
  • 2007-2009 Pontiac Torrent Front & Rear Shock & Strut Kit 4 Piece Set V6 3.4L (excluding 19 Inch Wheels)
  • 2008-2009 Saturn Vue XE All Wheel Drive Front & Rear Shock & Strut Kit 4 Piece Set
  • 2008-2010 Saturn Vue XR Front & Rear Shock & Strut Kit 4 Piece Set

This part replaces:

  • Hollander 527-00984R
  • Hollander 527-01709R
  • Hollander 527-00985L
  • Hollander 527-01710L
  • Monroe 172527
  • Monroe 172526
  • Monroe 911258
  • KYB 345055
  • KYB SR4162
  • KYB SR4161
Only 2 left in stock
Part #: 1ASSP01131


How-to Video:

(06:19 min)