In the past, replacing struts required specialized tools to compress, remove and transfer the old spring and mount.  Pre-assembled with all new parts, our complete strut and spring assemblies make this job much quicker and easier for the do-it-yourself mechanic.

Each complete strut & spring assembly contains:

  • Upper Strut Mount
  • Strut Bearing
  • Coil Spring
  • Boot & Bumper Kit
  • Gas-charged Strut 
Direct Fit

Direct fit replacement; not only will the part fit correctly, but it will function correctly.  Many competitors combine applications to cut down on the amount of parts they have to carry. This can result in the following issues: incorrect vehicle height, poor response and an uncomfortable ride.

Rigorously Tested

Rigorously tested and made from higher quality materials than the competition. Our parts are built to have a longer life in any environment or road conditions.


Pre-assembled, loaded strut & spring assemblies allow for a quicker, safer install than replacing with just bare struts. 

Trouble-Free Install

Trouble-free install includes the matched parts needed to get the job done. New mounts, bearings, springs and hardware will provide a better ride for your vehicle and save you time from not having to do the job again because a used part failed afterwards.

Matched Parts

When you buy the kit pre-built by us, you can be sure that the parts are matched for optimum performance.  Not all shocks and struts are manufactured the same, so mixing and matching can result in fit issues and potentially decrease the life of the parts.

Saves Time & Money

When you buy one of our kits, you not only save money over buying the parts individually, but you also save time having to search for all of the different parts that are correct for your vehicle (because we did it for you!)

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Removing the Shock (0:37)
    • Hold the upper shock nut with an 18mm wrench
    • Remove the upper shock bolt with a 15mm socket and ratchet
    • Support the rear axle with a jack
    • Hold the lower shock nut with an 18mm wrench
    • Remove the lower shock bolt with a 15mm socket and ratchet
    • Pull down the shock
  2. step : Installing the Shock (2:18)
    • Push the shock into place
    • Start the shock bolts
    • Lower the jack
    • Fasten the 18mm nut onto each bolt

Tools needed for replacement:

    Ratchets & Related

  • Ratchet

  • Sockets - Metric

  • 15mm Socket

  • Wrenches - Metric

  • 18mm Wrench

5.0 / 5.0
2 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
Excellent purchase
Excellent purchase. I was initially concerned with the qualilty at this low price point but after installation all those concerns went away. My F 150 rides very smoothly and I am very pleased with this purchase
September 6, 2017
9 months ago
Worked Perfect
This combo worked perfect. The rear shocks went in with out issue. The front struts were more work but bolted right in good kit over all.
August 28, 2017
10 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 3 questions Browse 3 questions and 6 answers
I have a 2005 f150 FX4 with a 2" lift. Will these fit with the lift?
Jeff W on Feb 17, 2016
BEST ANSWER: These are deigned as stock OE suspension replacements. Not knowing what you have for a lift, we cannot properly answer this question. I would suggest reviewing this with the Ford dealer parts department to see if your style of lift will effect the OE struts/shock operation.
Are these oem?
Zane H on Oct 22, 2017
BEST ANSWER: no, they aren't OEM. I'm actually a ford parts manager and we don't offer a pre assembled strut for an f-150 or hardly anything else. I actually bought these for a friend of mine to save him money. he hasn't had and problems so far and he takes his truck off road. I wouldn't have any reservations buying them again.
I have a 2006 super crew F 150 2 wd. Is this 4 set group for 4 or 2 wheel drive? And if not for a 2 wd do you carry any sets that do fit under $250.00 Part#1asspo1047 This set is the one in question
Keith P on Mar 14, 2017
BEST ANSWER: This set is for the 4 wheel drive models only. The 2 wheel drive set is under part number 1ASSP00972.

Vehicle Fit

  • 2004 Ford F150 Truck 4 Wheel Drive Front & Rear Shock & Strut Kit 4 Piece Set New Body Style
  • 2005-2008 Ford F150 Truck 4 Wheel Drive Front & Rear Shock & Strut Kit 4 Piece Set
  • 2006-2008 Lincoln Mark LT 4 Wheel Drive Front & Rear Shock & Strut Kit 4 Piece Set

This part replaces:

  • OE # 5L3Z18125EA, 5L3Z18125DA
  • Monroe 181361
  • Monroe 171361
  • Monroe 911262
  • KYB 344415
  • KYB SR4078
Part #: 1ASSP01047

How-to Video:

(03:43 min)