In the past, replacing struts required specialized tools to compress, remove and transfer the old spring and mount.  Pre-assembled with all new parts, our complete strut and spring assemblies make this job much quicker and easier for the do-it-yourself mechanic.

Each complete strut & spring assembly contains:

  • Upper Strut Mount
  • Strut Bearing
  • Coil Spring
  • Boot & Bumper Kit
  • Gas-charged Strut 

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Remove the rear shocks (1:10)
    • Use an 18 mm wrench and socket and ratchet to remove the two bolts on either end of the shock.
    • The wrench will help secure the bolt while you use your socket and ratchet or impact wrench to get the bolt out.
    • Jack up the control arm a bit to get the top bolt out all the way.
    • Pull the shock down and out of the vehicle.
  2. step : Install your new 1A Auto shock absorber (3:20)
    • Thread the end of the shock up into place on the vehicle.
    • Use your socket and ratchet to bolt in the top of the shock.
    • Use your wrench and socket and ratchet to secure the bottom of the shock absorber.

Tools needed for replacement:

    Ratchets & Related

  • Socket Extensions
  • Ratchet

  • Sockets - Metric

  • 18mm Socket

  • Wrenches - Metric

  • 18mm Wrench

4.5 / 5.0
2 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
1
1
0
0
0
All the parts fit like OE
Installing was easy and simple. Van rides nice again very satisfied with purchase
March 15, 2017
Purchased
11 months ago
Chevy Venture Shock/Struts
Delivery was prompt and the struts appeared to be better or equal to the current struts on my 2004 Chevy Venture. The rear shocks looked thinner in girth than the old ones on the van but seem to be doing fine. No complications yet. I do have some concerns with the front struts because they needed to be compressed to fit and then once decompressed the front end is higher than with the old struts. The paperwork included stated that this was normal and should re-adjust after a few months of driving. Stability is much better and the thumping sound in the back is gone (old rear driver side shock was dead). Great price for all components and saved me about $120 dollars for parts compared to local auto part stores.
June 16, 2017
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

How-to Video:

(06:45 min)

Tools List:

    Ratchets & Related

  • Socket Extensions
  • Ratchet

  • Sockets - Metric

  • 18mm Socket

  • Wrenches - Metric

  • 18mm Wrench



This part replaces:

  • OE # 88945802
  • OE # 15943270
  • Monroe 281670
  • Monroe 271670
  • Monroe 37156
  • KYB 344338
  • KYB SR4052

Vehicle Fit

  • 1997-2005 Chevy Venture Front & Rear Shock & Strut Kit 4 Piece Set for Models without Self Leveling Suspension Front Wheel Drive
  • 1997-2004 Olds Silhouette Front & Rear Shock & Strut Kit 4 Piece Set for Models without Self Leveling Suspension Front Wheel Drive
  • 1999-2004 Pontiac Montana Front & Rear Shock & Strut Kit 4 Piece Set for Models without Self Leveling Suspension Front Wheel Drive
  • 2005 Pontiac Montana Front & Rear Shock & Strut Kit 4 Piece Set V6 3.4L Models for Models without Self Leveling Suspension
  • 1997-1998 Pontiac Trans Sport Front & Rear Shock & Strut Kit 4 Piece Set for Models without Self Leveling Suspension
Part #: 1ASSP00752

Ships Same Day for orders placed by 4 P.M. ET

We're here to help

1A Auto Parts

Customer Feedback

"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More