In the past, replacing struts required specialized tools to compress, remove and transfer the old spring and mount.  Pre-assembled with all new parts, our complete strut and spring assemblies make this job much quicker and easier for the do-it-yourself mechanic.

Each complete strut & spring assembly contains:

  • Upper Strut Mount
  • Strut Bearing
  • Coil Spring
  • Boot & Bumper Kit
  • Gas-charged Strut 

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Remove the top of the strut (1:07)
    • Lift the hood and secure it.
    • Remove the three 13 mm nuts in the engine bay securing the top of the strut.
    • Keep two of them loosely threaded just to keep the strut from flopping around while you work on the bottom half.
  2. step : Remove the wheels (1:37)
    • Use a 19 mm lug wrench to loosen the lug nuts.
    • Raise and secure the vehicle.
    • Remove the lug nuts and set the wheel aside.
  3. step : Remove the stabilizer link (2:03)
    • Use an 18 mm wrench and an 18 mm socket and ratchet to remove the stabilizer link.
    • A breaker bar can help get it loose, using the wrench to secure the back of the bolt.
  4. step : Remove the bottom of the strut (3:01)
    • Apply some penetrating oil to the two 18 mm nuts securing the strut to the steering knuckle.
    • Work the bolts out of the steering knuckle and strut.
    • Unthread the top two nuts and pull the strut down and out.
  5. step : Install the new strut (4:35)
    • Put the strut into place and thread one of the bolts through the bottom of the strut and the steering knuckle.
    • This secures the strut so you can secure the top three nuts.
    • Torque the two bolts at the bottom to 100 ft lbs.
    • Reassemble the stabilizer link.
    • Replace the wheel, using a star pattern on the lug nuts.
    • Torque the top three nuts to 20 ft lbs.
    • Torque the lug nuts to 100 ft lbs.

Tools needed for replacement:

    General Tools

  • Hammer
  • Floor Jack
  • Jack Stands

  • Ratchets & Related

  • Torque Wrench
  • Ratchet
  • A Piece of Pipe (for leverage)
  • Socket Extensions
  • 1/2 Inch Breaker Bar

  • Sockets - Metric

  • 14mm Socket
  • 17mm Socket
  • 16mm Socket
  • 15mm Socket
  • 19mm Socket
  • 13mm Socket
  • 18mm Socket

  • Wrenches - Metric

  • 18mm Wrench

4.8 / 5.0
6 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
5
1
0
0
0
Struts and shocks
Very fast shipping and always correct , parts went on perfect , I love ordering from here, as a lady, I may ask a few extra questions and they are very patient
January 27, 2017
Purchased
1 year ago
Thanks
Good kit for price. Easy to put on saved lots of money doing it myself. Only took 3 days to come with free shipping??
July 16, 2017
Purchased
7 months ago
Love it. And I did it my self by watching your video.
July 12, 2017
Purchased
7 months ago
Great parts
1AAuto is A1 great parts arrived in a few days. Everything went great.
August 15, 2017
Purchased
6 months ago
2008 chevy hhr
Took only 4 business days to arrive from purchased date. Struts went on easy with no problems. Fit was perfect. Shocks went on even easier than struts. Rides like new now. First time ordering from 1aauto, I've always seen there youtube channel and figured I would give them a try and they are top notch. Best price by far. Everyone else wants 120 to 150 for one strut, and here you get 2 struts and 2 shocks for 175. You cant beat that. Didn't have to use their customer service department but I'm sure it's great too from other reviews I've read on here. I would recommend this product and company.
July 26, 2017
Purchased
7 months ago
1A strut and shock kit
So far they are working very well. They were very easy to install.
December 28, 2017
Purchased
2 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 4 questions Browse 4 questions and 10 answers
Is this kit have all to replace front and back or do you need 2 to do whole car?
Clayton S on Apr 26, 2017
BEST ANSWER: This will cover all four wheels.
Is this set equal to the FE1 or FE5 suspension?
Cameron W on Jan 27, 2018
BEST ANSWER: Yes, according to the information you supplied, the part you���re looking at will be correct for your vehicle. The suspension RPO code will not affect these parts. If you have any other questions or would like to place an order with one of our customer service representatives, please feel free to give us a call.
Will this fit 07 cobalt SS?
Jarrod B on Nov 11, 2017
BEST ANSWER: Yes, according to the information you supplied, the part you���re looking at will be correct for your vehicle. If you have any other questions or would like to place an order with one of our customer service representatives, please feel free to give us a call.
What brand are the 2006 Chevy Cobalt SS 2.0 Shock & Strut Kit 4 Piece Set for $214.95?
Nathan on Mar 29, 2017
BEST ANSWER: We have a few different aftermarket companies build these parts specifically for us, as our 1A Auto house brand. They are manufactured to the same OEM specifications as the original part that came with your vehicle. If you have any further questions, please don't hesitate to ask.

How-to Video:

(07:21 min)

Tools List:

    General Tools

  • Hammer
  • Floor Jack
  • Jack Stands

  • Ratchets & Related

  • Torque Wrench
  • Ratchet
  • A Piece of Pipe (for leverage)
  • Socket Extensions
  • 1/2 Inch Breaker Bar

  • Sockets - Metric

  • 14mm Socket
  • 17mm Socket
  • 16mm Socket
  • 15mm Socket
  • 19mm Socket
  • 13mm Socket
  • 18mm Socket

  • Wrenches - Metric

  • 18mm Wrench



This part replaces:

  • Monroe 182179L
  • Monroe 182179R
  • Monroe 172179L
  • Monroe 172179R
  • Monroe 5779
  • KYB 349043
  • KYB SR4057
  • KYB SR4056

Vehicle Fit

  • 2005-2010 Chevy Cobalt Front & Rear Shock & Strut Kit 4 Piece Set
  • 2006-2011 Chevy HHR Front & Rear Shock & Strut Kit 4 Piece Set excluding SS Models
  • 2007-2009 Pontiac G5 Front & Rear Shock & Strut Kit 4 Piece Set
Part #: 1ASSP00655

Ships Same Day for orders placed by 4 P.M. ET

We're here to help

1A Auto Parts

Customer Feedback

"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More