Replaces

Shock & Strut Kit Monroe Sensa-Trac 172248, 5797 - MNSSP00896

Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Why Buy Monroe Sensa-Trac Shock and Struts?

Monroe Sensa-Trac Shock Absorbers and Struts are designed to be direct replacements while improving handling. Some of their benefits include:

  • Application specific valving
  • Improved filtering of road noise, vibration, and harshness
  • Nitrogen gas charged
  • Upgraded sealing for longer life

Item Condition: New

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Wheel (0:47)
    • Loosen the lug nuts
    • Raise and support the vehicle
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Rear Shock Absorber (1:56)
    • Remove the two 16mm bolts at the top of the shock absorber
    • Compress the shock
    • Pull out the top of the shock
    • Remove the bottom shock bolt with an 18mm wrench and a 15mm socket and ratchet
    • Pull out the shock
    • Hold the shock stud with vise grip pliers
    • Remove the 15mm nut from the top of the shock
    • Remove the shock mount from the shock
  3. step : Installing the Shock (4:46)
    • Remove the 15mm nut from the top of the new shock
    • Remove the washers from the new shock
    • Put the shock mount onto the new shock, with the rubber pointing out
    • Put the appropriate washer onto the shock stud
    • Fasten the 15mm nut onto the shock stud
    • Put the shock into place, top first
    • Compress the shock
    • Line up the shock with the lower control arm
    • Install the bottom shock bolt
    • Start the nut onto the bottom shock bolt
    • Fasten the bottom shock bolt with an 18mm wrench and a 15mm socket and ratchet
    • Tighten the bottom shock bolt to 53 foot-pounds of torque
    • Start the two 16mm bolts into the shock mount
    • Tighten the two 16mm bolts to 38 foot-pounds
  4. step : Installing the Wheel (6:40)
    • Put the wheel into place
    • Start the lug nuts
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 110 foot-pounds in a crossing pattern

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Rust Penetrant
  • Gloves

  • Pliers, Cutters & misc Wrenches

  • Vise Grip Pliers

  • Ratchets & Related

  • Ratchet
  • Torque Wrench
  • Socket Extensions
  • 1/2 Inch Breaker Bar

  • Sockets - Metric

  • 21mm Socket
  • 15mm Socket

  • Wrenches - Metric

  • 16mm Wrench
  • 17mm Wrench
  • 15mm Wrench
  • 18mm Wrench

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2005-2010Chrysler 300 Chrysler 300 Rear Wheel Drive Front & Rear Shock & Strut Kit (excluding SRT-8) for Models without Nivomat Self Leveling Suspension Monroe Sensa-Trac 172248, 5797
2006-2010Dodge Charger Dodge Charger Rear Wheel Drive Front & Rear Shock & Strut Kit (excluding Police Package) without Sport Suspension for Models without Nivomat Self Leveling Suspension Monroe Sensa-Trac 172248, 5797
2005-2008Dodge Magnum Dodge Magnum Rear Wheel Drive Front & Rear Shock & Strut Kit (excluding Police Package) without Sport Suspension for Models without Nivomat Self Leveling Suspension Monroe Sensa-Trac 172248, 5797
Part #: MNSSP00896

Out of Stock

Monroe Sensa-Trac
Brand #: 172248, 5797

How-to Video:

(07:10 min)