Our direct fit gas-charged shock absorbers help to restore your vehicle’s handling and ride quality to just like new.

To ensure the vehicle performs safely and as designed, we recommend replacing shocks & struts in pairs. If the damping rates are significantly different from side to side (like using different brand parts or mixing old with new) the vehicle body and wheel movement variations could cause handling irregularities. We also recommend performing an alignment after replacement. This will ensure proper tracking and protect your vehicle's tires from premature wear.

Direct Fit

Direct fit replacement; not only will the part fit correctly, but it will function correctly.  Many competitors combine applications to cut down on the amount of parts they have to carry. This can result in the following issues: incorrect vehicle height, poor response and an uncomfortable ride.

Rigorously Tested

Rigorously tested and made from higher quality materials than the competition. Our parts are built to have a longer life in any environment or road conditions.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Removing the Shock (0:50)
    • Apply rust penetrant to the shock bolts
    • Hold the lower shock bolt with a 21mm wrench
    • Remove the lower 21mm nut from the shock
    • Remove the upper 21mm bolt from the shock
    • Tap the lower 21mm bolt out with a hammer
    • Remove the upper 21mm bolt by hand
    • Pull the shock down and out
  2. step : Installing the Shock (2:24)
    • Put the shock into place
    • Start the upper 21mm bolt into the shock
    • Raise the shock mounting point with a jack
    • Push the shock into the lower mounting point
    • Start the lower 21mm bolt and nut onto the shock
    • Tighten the two 21mm bolts to 80 -85 foot-pounds.
    • Repeat Steps 1 and 2 for the other shock

Tools needed for replacement:

    General Tools

  • Hammer
  • Jack Stands
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Rust Penetrant

  • Ratchets & Related

  • Torque Wrench
  • A Piece of Pipe (for leverage)
  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 21mm Socket

  • Wrenches - Metric

  • 21mm wrench

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2007 Chevy Silverado 1500 New Body Style Rear Shock Absorber Driver or Passenger Side without Electronic Suspension TRQ SBA60755
  • 2008-2013 Chevy Silverado 1500 Rear Shock Absorber Driver or Passenger Side without Electronic Suspension TRQ SBA60755
  • 2014-2016 Chevy Silverado 1500 Rear Shock Absorber Driver or Passenger Side TRQ SBA60755
  • 2007 GMC Sierra 1500 New Body Style Rear Shock Absorber Driver or Passenger Side without Electronic Suspension TRQ SBA60755
  • 2008-2013 GMC Sierra 1500 Rear Shock Absorber Driver or Passenger Side without Electronic Suspension TRQ SBA60755
  • 2014-2016 GMC Sierra 1500 Rear Shock Absorber Driver or Passenger Side TRQ SBA60755

This part replaces:

  • Monroe 911533
  • KYB 345074
  • TRQ SBA60755
Part #: 1ASHA00300


TRQ
Brand #: SBA60755

How-to Video:

(04:39 min)