Our direct fit gas-charged shock absorbers help to restore your vehicle’s handling and ride quality to just like new.

To ensure the vehicle performs safely and as designed, we recommend replacing shocks & struts in pairs. If the damping rates are significantly different from side to side (like using different brand parts or mixing old with new) the vehicle body and wheel movement variations could cause handling irregularities. We also recommend performing an alignment after replacement. This will ensure proper tracking and protect your vehicle's tires from premature wear.

Direct Fit

Fits and functions correctly.  Competitors combine applications to reduce the amount of parts they carry, resulting in: incorrect vehicle height, poor response and an uncomfortable ride.

Rigorously Tested

Made from higher quality materials than the competition. Built to have a longer life in any environment or road conditions.

Part Details

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Shock (0:49)
    • If you are raising the vehicle, support it by the frame
    • Loosen the lower 18mm nut and bolt from the shock
    • Loosen the upper 18mm bolt from the shock
    • If you have raised the vehicle, support the axle with a jack
    • Pull the bolts out of the shock
    • Pull the shock down and out
  2. step : Installing the New Shock (2:15)
    • Put the new shock into place
    • Thread the top 18mm bolt into the shock by hand
    • Push the shock up into place
    • Thread the lower 18mm bolt into the shock
    • Tighten the top 18mm bolt preliminarily
    • Fasten the 18mm nut onto the lower 18mm bolt
    • Tighten the lower 18mm nut and bolt preliminarily
    • If you raised the vehicle, lower it to the ground
    • Start the vehicle
    • Allow the air suspension to inflate
    • Check the ride height
    • Tighten the two 18mm bolts

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Jack Stands

  • Ratchets & Related

  • Socket Extensions
  • Ratchet

  • Sockets - Metric

  • 18mm Socket

  • Wrenches - Metric

  • 18mm Wrench

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2004-2007 Buick Rainier Rear Shock Absorber Driver or Passenger Side TRQ SBA60546
  • 2003-2006 Chevy SSR Rear Shock Absorber Driver or Passenger Side TRQ SBA60546
  • 2002-2009 Chevy Trailblazer Rear Shock Absorber Driver or Passenger Side TRQ SBA60546
  • 2002-2006 Chevy Trailblazer EXT Rear Shock Absorber Driver or Passenger Side TRQ SBA60546
  • 2002-2009 GMC Envoy Rear Shock Absorber Driver or Passenger Side TRQ SBA60546
  • 2002-2006 GMC Envoy XL Rear Shock Absorber Driver or Passenger Side TRQ SBA60546
  • 2004-2005 GMC Envoy XUV Rear Shock Absorber Driver or Passenger Side TRQ SBA60546
  • 2003-2008 Isuzu Ascender Rear Shock Absorber Driver or Passenger Side TRQ SBA60546
  • 2002-2004 Olds Bravada Rear Shock Absorber Driver or Passenger Side TRQ SBA60546
  • 2005-2008 Saab 9-7X Rear Shock Absorber Driver or Passenger Side TRQ SBA60546

This part replaces:

  • OE # 25820699
  • Monroe 37241
  • KYB 343395
  • TRQ SBA60546
Part #: 1ASHA00052


Order must be placed by 4pm ET
TRQ
Brand #: SBA60546

How-to Video:

(03:45 min)