Our direct fit gas-charged shock absorbers help to restore your vehicle’s handling and ride quality to just like new.

To ensure the vehicle performs safely and as designed, we recommend replacing shocks & struts in pairs. If the damping rates are significantly different from side to side (like using different brand parts or mixing old with new) the vehicle body and wheel movement variations could cause handling irregularities. We also recommend performing an alignment after replacement. This will ensure proper tracking and protect your vehicle's tires from premature wear.

Direct Fit

Fits and functions correctly.  Competitors combine applications to reduce the amount of parts they carry, resulting in: incorrect vehicle height, poor response and an uncomfortable ride.

Rigorously Tested

Made from higher quality materials than the competition. Built to have a longer life in any environment or road conditions.

Part Details

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Remove the wheel (0:47)
    • Loosen the lug nuts with a lug wrench
    • Raise and secure the vehicle
    • Remove the lug nuts and wheel.
  2. step : Remove and replace the shocks (1:09)
    • Apply penetrating oil to the top and bottom bolts
    • Use your 17 mm socket and ratchet to remove the shock absorbers.
    • Reverse the procedure to install them, torque the 17 mm bolts 65-70 ft lbs
  3. step : Replace the wheel (2:57)
    • Put the wheel on and hand tighten the lug nuts
    • Lower the vehicle and using a star pattern, torque the lug nuts to 90-100

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Jack Stands

  • Materials, Fluids, and Supplies

  • Rust Penetrant

  • Pliers, Cutters & misc Wrenches

  • Lug Wrench

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 17mm Socket
  • 19mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 1 question Browse 1 question and 1 answer
Is this only one? And if so can it be used for passanger side and or driver side?
Erick on Apr 21, 2018
BEST ANSWER: This listing is only for one, but can be used on either side!

Vehicle Fit

  • 2001-2002 Acura MDX Rear Shock Absorber Driver or Passenger Side TRQ SBA60579
  • 1999-2004 Honda Odyssey Rear Shock Absorber Driver or Passenger Side TRQ SBA60579
  • 2003-2008 Honda Pilot Rear Shock Absorber Driver or Passenger Side TRQ SBA60579

This part replaces:

  • OE # 52610S0XA04
  • OE # 52610S0X305
  • Monroe 37218
  • KYB 344353
  • TRQ SBA60579
Part #: 1ASHA00091

TRQ
Brand #: SBA60579

How-to Video:

(04:02 min)