Our direct fit gas-charged shock absorbers help to restore your vehicle’s handling and ride quality to just like new.

Direct Fit

Direct fit replacement; not only will the part fit correctly, but it will function correctly.  Many competitors combine applications to cut down on the amount of parts they have to carry. This can result in the following issues: incorrect vehicle height, poor response and an uncomfortable ride.

Rigorously Tested

Rigorously tested and made from higher quality materials than the competition. Our parts are built to have a longer life in any environment or road conditions.

Matched Parts

When you buy the kit pre-built by us, you can be sure that the parts are matched for optimum performance.  Not all shocks and struts are manufactured the same, so mixing and matching can result in fit issues and potentially decrease the life of the parts.

Saves Time & Money

When you buy one of our kits, you not only save money over buying the parts individually, but you also save time having to search for all of the different parts that are correct for your vehicle (because we did it for you!)

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Remove the rear shocks (1:10)
    • Use an 18 mm wrench and socket and ratchet to remove the two bolts on either end of the shock.
    • The wrench will help secure the bolt while you use your socket and ratchet or impact wrench to get the bolt out.
    • Jack up the control arm a bit to get the top bolt out all the way.
    • Pull the shock down and out of the vehicle.
  2. step : Install your new 1A Auto shock absorber (3:20)
    • Thread the end of the shock up into place on the vehicle.
    • Use your socket and ratchet to bolt in the top of the shock.
    • Use your wrench and socket and ratchet to secure the bottom of the shock absorber.

Tools needed for replacement:

    Ratchets & Related

  • Socket Extensions
  • Ratchet

  • Sockets - Metric

  • 18mm Socket

  • Wrenches - Metric

  • 18mm Wrench

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2005-2007 Buick Terraza Rear Shock Absorber Pair Front Wheel Drive for Models without Self Leveling Suspension TRQ SBA60293
  • 2005-2009 Chevy Uplander Rear Shock Absorber Pair Front Wheel Drive for Models without Self Leveling Suspension TRQ SBA60293
  • 1997-2005 Chevy Venture Rear Shock Absorber Pair Front Wheel Drive for Models without Self Leveling Suspension TRQ SBA60293
  • 1997-2004 Olds Silhouette Rear Shock Absorber Pair Front Wheel Drive for Models without Self Leveling Suspension TRQ SBA60293
  • 2001-2005 Pontiac Aztek Rear Shock Absorber Pair Front Wheel Drive TRQ SBA60293
  • 1999-2004 Pontiac Montana Rear Shock Absorber Pair Front Wheel Drive for Models without Self Leveling Suspension TRQ SBA60293
  • 2005 Pontiac Montana Rear Shock Absorber V6 3.4L Models Pair for Models without Self Leveling Suspension TRQ SBA60293
  • 2005-2006 Pontiac Montana SV6 Rear Shock Absorber Pair Front Wheel Drive for Models without Self Leveling Suspension TRQ SBA60293
  • 1997-1998 Pontiac Trans Sport Rear Shock Absorber Pair for Models without Self Leveling Suspension TRQ SBA60293
  • 2005-2007 Saturn Relay Rear Shock Absorber Pair Front Wheel Drive for Models without Self Leveling Suspension TRQ SBA60293

This part replaces:

  • OE # 15943270
  • Monroe 37156
  • KYB 344338
  • TRQ SBA60293
Part #: 1ASSP00647



TRQ
Brand #: SBA60293

How-to Video:

(06:45 min)