Our direct fit gas-charged shock absorbers help to restore your vehicle’s handling and ride quality to just like new.

Direct Fit

Direct fit replacement; not only will the part fit correctly, but it will function correctly.  Many competitors combine applications to cut down on the amount of parts they have to carry. This can result in the following issues: incorrect vehicle height, poor response and an uncomfortable ride.

Rigorously Tested

Rigorously tested and made from higher quality materials than the competition. Our parts are built to have a longer life in any environment or road conditions.

Matched Parts

When you buy the kit pre-built by us, you can be sure that the parts are matched for optimum performance.  Not all shocks and struts are manufactured the same, so mixing and matching can result in fit issues and potentially decrease the life of the parts.

Saves Time & Money

When you buy one of our kits, you not only save money over buying the parts individually, but you also save time having to search for all of the different parts that are correct for your vehicle (because we did it for you!)

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Removing the Rear Shock (0:49)
    • Raise the Vehicle with a Floor Jack
    • Secure the Vehicle on Jack Stands
    • Use a 21mm wrench to hold the lower shock bolt
    • Remove the lower shock nut with a 21mm socket and ratchet
    • Remove one of the two 14mm bolts from the top of the shock
    • Hold the shock as you remove the other 14mm bolt
    • Pull down the shock
  2. step : Installing the New Strut (1:48)
    • Thread one 14mm bolt through the top of the new shock
    • Put the shock into place
    • Tighten the first 14mm bolt preliminarily
    • Start the second 14mm bolt and tighten it preliminarily
    • Tighten the two 14mm bolts
    • Push the lower end of the shock into place
    • Push the 21mm bolt through the lower end of the shock
    • Start the 21mm nut by hand
    • Use a 21mm wrench to hold the lower shock bolt
    • Tighten the 21mm nut to between 75-80 foot-pounds of torque
    • Lower the vehicle to the ground
    • Repeat this procedure on the other side

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Jack Stands

  • Ratchets & Related

  • Ratchet
  • Socket Extensions
  • Torque Wrench

  • Sockets - Metric

  • 14mm Socket
  • 21mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 1999-2000 Cadillac Escalade Rear Shock Absorber Pair
  • 1988-1999 Chevy C1500 Truck Rear Shock Absorber Pair
  • 1988-2000 Chevy C2500 Truck Rear Shock Absorber Pair
  • 1996-2013 Chevy Express 2500 Van Rear Shock Absorber Pair
  • 1996-2013 Chevy Express 3500 Van Rear Shock Absorber Pair (excluding Cutaway Chassis)
  • 1988-1999 Chevy K1500 Truck Rear Shock Absorber Pair
  • 1988-2000 Chevy K2500 Truck Rear Shock Absorber Pair
  • 1992-1999 Chevy Suburban C1500 Rear Shock Absorber Pair
  • 1992-1999 Chevy Suburban C2500 Rear Shock Absorber Pair
  • 1992-1999 Chevy Suburban K1500 4 Wheel Drive Rear Shock Absorber Pair (excluding Z71 Models)
  • 1992-1999 Chevy Suburban K2500 4 Wheel Drive Rear Shock Absorber Pair (excluding Z71 Models)
  • 1995-1999 Chevy Tahoe 4 Door 4 Wheel Drive Rear Shock Absorber Pair
  • 2000 Chevy Tahoe Rear Shock Absorber V8 5.7L Models Pair
  • 1988-1999 GMC C1500 Truck Rear Shock Absorber Pair
  • 1988-2000 GMC C2500 Truck Rear Shock Absorber Pair
  • 1988-1999 GMC K1500 Truck Rear Shock Absorber Pair
  • 1988-2000 GMC K2500 Truck Rear Shock Absorber Pair
  • 1996-2013 GMC Savana 2500 Van Rear Shock Absorber Pair
  • 1996-2013 GMC Savana 3500 Van Rear Shock Absorber Pair (excluding Cutaway Chassis)
  • 1992-1999 GMC Suburban C1500 Rear Shock Absorber Pair
  • 1992-1999 GMC Suburban C2500 Rear Shock Absorber Pair
  • 1992-1999 GMC Suburban K1500 Rear Shock Absorber Pair
  • 1992-1999 GMC Suburban K2500 Rear Shock Absorber Pair
  • 1995-1999 GMC Yukon 4 Door 4 Wheel Drive Rear Shock Absorber Pair
  • 2000 GMC Yukon Rear Shock Absorber V8 5.7L Models Pair

This part replaces:

  • Monroe 32265
  • KYB 344273
Part #: 1ASSP00615


How-to Video:

(03:20 min)