Our direct fit gas-charged shock absorbers help to restore your vehicle’s handling and ride quality to just like new.

Direct Fit

Direct fit replacement; not only will the part fit correctly, but it will function correctly.  Many competitors combine applications to cut down on the amount of parts they have to carry. This can result in the following issues: incorrect vehicle height, poor response and an uncomfortable ride.

Rigorously Tested

Rigorously tested and made from higher quality materials than the competition. Our parts are built to have a longer life in any environment or road conditions.

Matched Parts

When you buy the kit pre-built by us, you can be sure that the parts are matched for optimum performance.  Not all shocks and struts are manufactured the same, so mixing and matching can result in fit issues and potentially decrease the life of the parts.

Saves Time & Money

When you buy one of our kits, you not only save money over buying the parts individually, but you also save time having to search for all of the different parts that are correct for your vehicle (because we did it for you!)

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Removing the Shock (0:46)
    • Apply penetrating oil to the shock nuts
    • Remove the lower 18mm nut from the shock
    • Remove the upper 18mm nut from the shock
    • Pry off the shock with a pry bar
  2. step : Installing the Shock (1:55)
    • Apply pressure to the shock
    • Pull off the retaining strap
    • Allow the shock to expand
    • Clean the shock mounting studs with a wire brush
    • Put the shock into place, starting at the top
    • Press the shock as you put it onto the lower shock stud
    • Fasten the lower 18mm nut onto the shock
    • Fasten the upper 18mm nut onto the shock
    • Tighten both 18mm nuts

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Jack Stands
  • Wire Brush

  • Materials, Fluids, and Supplies

  • Rust Penetrant

  • Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Pry Bar

  • Sockets - Metric

  • 18mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 1981-1987 Isuzu Pup Pickup Shock Absorber Rear Pair
  • 1984 Isuzu Trooper Shock Absorber Rear Pair
  • 1984-1987 Isuzu Trooper II Shock Absorber Rear Pair
  • 1986 Jeep Comanche (MJ) Shock Absorber Rear Pair
  • 2000-2004 Nissan Frontier Shock Absorber Rear Pair
  • 2000-2004 Nissan Xterra Shock Absorber Rear Pair
  • 1969-1987 Toyota Land Cruiser Shock Absorber Rear Pair

This part replaces:

  • Monroe 34802
  • KYB 344015
Part #: 1ASSP00390



How-to Video:

(03:48 min)