Replaces

Shock Absorber Rear Monroe Sensa-Trac 37035 - MNSHA00086

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Remove the shock absorbers (1:05)
    • Apply penetrating oil to the nuts and bolts
    • Use a 18 socket and ratchet to remove the nuts, using a breaker bar to help.
    • Secure the bolt while you remove the nut with a 15 mm wrench.
    • With a hammer and chisel, remove the bolt from the shock.
  2. step : Remove the spare tire (2:10)
    • Use the jack that comes with the spare or a large screwdriver to unbolt the spare tire.
    • Remove the bracket securing the spare tire.
    • Pop the bracket off with a sharp rap with a hammer.
    • Now you have access to the top of the shock absorber.
    • Use a 13mm wrench to remove the two bolts.
  3. step : Install the new shock absorber (4:00)
    • Bolt in the upper part of the shock absorber, using a 13 mm wrench.
    • On the bottom part, use a hammer to get the bolt into place if necessary.
    • Use an 18 mm socket and ratchet to secure the nut on the bottom bolt.

Tools needed for replacement:

    General Tools

  • Hammer
  • Chisel

  • Materials, Fluids, and Supplies

  • Rust Penetrant

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 18mm Socket

  • Wrenches - Metric

  • 15mm Wrench
  • 13mm Wrench

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

How-to Video:

(06:35 min)

Tools List:

    General Tools

  • Hammer
  • Chisel

  • Materials, Fluids, and Supplies

  • Rust Penetrant

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 18mm Socket

  • Wrenches - Metric

  • 15mm Wrench
  • 13mm Wrench



This part replaces:

  • Monroe Sensa-Trac 37035

Vehicle Fit

  • 1991-1993 Ford Explorer Rear Shock Absorber Monroe Sensa-Trac 37035
  • 1994-2001 Ford Explorer Rear Shock Absorber for Models with Adjustable Suspension Monroe Sensa-Trac 37035
  • 2001-2005 Ford Explorer Sport Trac Rear Shock Absorber Monroe Sensa-Trac 37035
  • 1991-1994 Mazda Navajo Rear Shock Absorber Monroe Sensa-Trac 37035
  • 1997-2001 Mercury Mountaineer Rear Shock Absorber Monroe Sensa-Trac 37035
Part #: MNSHA00086

Out of Stock

Monroe Sensa-Trac
Brand #: 37035

We're here to help

1A Auto Parts

Customer Feedback

"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More