Our direct fit gas-charged shock absorbers help to restore your vehicle’s handling and ride quality to just like new.

To ensure the vehicle performs safely and as designed, we recommend replacing shocks & struts in pairs. If the damping rates are significantly different from side to side (like using different brand parts or mixing old with new) the vehicle body and wheel movement variations could cause handling irregularities. We also recommend performing an alignment after replacement. This will ensure proper tracking and protect your vehicle's tires from premature wear.

Direct Fit

Fits and functions correctly.  Competitors combine applications to reduce the amount of parts they carry, resulting in: incorrect vehicle height, poor response and an uncomfortable ride.

Rigorously Tested

Made from higher quality materials than the competition. Built to have a longer life in any environment or road conditions.

Part Details

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Rear Shock (0:49)
    • Raise the Vehicle with a Floor Jack
    • Secure the Vehicle on Jack Stands
    • Use a 21mm wrench to hold the lower shock bolt
    • Remove the lower shock nut with a 21mm socket and ratchet
    • Remove one of the two 14mm bolts from the top of the shock
    • Hold the shock as you remove the other 14mm bolt
    • Pull down the shock
  2. step : Installing the New Strut (1:48)
    • Thread one 14mm bolt through the top of the new shock
    • Put the shock into place
    • Tighten the first 14mm bolt preliminarily
    • Start the second 14mm bolt and tighten it preliminarily
    • Tighten the two 14mm bolts
    • Push the lower end of the shock into place
    • Push the 21mm bolt through the lower end of the shock
    • Start the 21mm nut by hand
    • Use a 21mm wrench to hold the lower shock bolt
    • Tighten the 21mm nut to between 75-80 foot-pounds of torque
    • Lower the vehicle to the ground
    • Repeat this procedure on the other side

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Jack Stands

  • Ratchets & Related

  • Ratchet
  • Socket Extensions
  • Torque Wrench

  • Sockets - Metric

  • 14mm Socket
  • 21mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

Year Make Model Description
1999-2000Cadillac Escalade Cadillac Escalade Rear Shock Absorber Driver or Passenger Side TRQ SBA60644
1988-1999Chevy C1500 Truck Chevy C1500 Truck Rear Shock Absorber Driver or Passenger Side TRQ SBA60644
1988-2000Chevy C2500 Truck Chevy C2500 Truck Rear Shock Absorber Driver or Passenger Side TRQ SBA60644
1996-2013Chevy Express 2500 Van Chevy Express 2500 Van Rear Shock Absorber Driver or Passenger Side TRQ SBA60644
1996-2013Chevy Express 3500 Van Chevy Express 3500 Van (excluding Cutaway Chassis) Rear Shock Absorber Driver or Passenger Side TRQ SBA60644
1988-1999Chevy K1500 Truck Chevy K1500 Truck Rear Shock Absorber Driver or Passenger Side TRQ SBA60644
1988-2000Chevy K2500 Truck Chevy K2500 Truck Rear Shock Absorber Driver or Passenger Side TRQ SBA60644
1992-1999Chevy Suburban C1500 Chevy Suburban C1500 Rear Shock Absorber Driver or Passenger Side TRQ SBA60644
1992-1999Chevy Suburban C2500 Chevy Suburban C2500 Rear Shock Absorber Driver or Passenger Side TRQ SBA60644
1992-1999Chevy Suburban K1500 Chevy Suburban K1500 4 Wheel Drive (excluding Z71 Models) Rear Shock Absorber Driver or Passenger Side TRQ SBA60644
1992-1999Chevy Suburban K2500 Chevy Suburban K2500 4 Wheel Drive (excluding Z71 Models) Rear Shock Absorber Driver or Passenger Side TRQ SBA60644
1995-1999Chevy Tahoe Chevy Tahoe 4 Door 4 Wheel Drive Rear Shock Absorber Driver or Passenger Side TRQ SBA60644
2000Chevy Tahoe Chevy Tahoe V8 5.7L Rear Shock Absorber Driver or Passenger Side TRQ SBA60644
1988-1999GMC C1500 Truck GMC C1500 Truck Rear Shock Absorber Driver or Passenger Side TRQ SBA60644
1988-2000GMC C2500 Truck GMC C2500 Truck Rear Shock Absorber Driver or Passenger Side TRQ SBA60644
1988-1999GMC K1500 Truck GMC K1500 Truck Rear Shock Absorber Driver or Passenger Side TRQ SBA60644
1988-2000GMC K2500 Truck GMC K2500 Truck Rear Shock Absorber Driver or Passenger Side TRQ SBA60644
1996-2013GMC Savana 2500 Van GMC Savana 2500 Van Rear Shock Absorber Driver or Passenger Side TRQ SBA60644
1996-2013GMC Savana 3500 Van GMC Savana 3500 Van (excluding Cutaway Chassis) Rear Shock Absorber Driver or Passenger Side TRQ SBA60644
1992-1999GMC Suburban C1500 GMC Suburban C1500 Rear Shock Absorber Driver or Passenger Side TRQ SBA60644
1992-1999GMC Suburban C2500 GMC Suburban C2500 Rear Shock Absorber Driver or Passenger Side TRQ SBA60644
1992-1999GMC Suburban K1500 GMC Suburban K1500 Rear Shock Absorber Driver or Passenger Side TRQ SBA60644
1992-1999GMC Suburban K2500 GMC Suburban K2500 Rear Shock Absorber Driver or Passenger Side TRQ SBA60644
1995-1999GMC Yukon GMC Yukon 4 Door 4 Wheel Drive Rear Shock Absorber Driver or Passenger Side TRQ SBA60644
2000GMC Yukon GMC Yukon V8 5.7L Rear Shock Absorber Driver or Passenger Side TRQ SBA60644

This part replaces:

  • Monroe 32265
  • KYB 344273
  • TRQ SBA60644
Part #: 1ASHA00161


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

TRQ
Brand #: SBA60644

How-to Video:

(03:20 min)