Our direct fit gas-charged shock absorbers help to restore your vehicle’s handling and ride quality to just like new.

Direct Fit

Fits and functions correctly.  Competitors combine applications to reduce the amount of parts they carry, resulting in: incorrect vehicle height, poor response and an uncomfortable ride.

Rigorously Tested

Made from higher quality materials than the competition. Built to have a longer life in any environment or road conditions.

Matched Parts

Not all shocks and struts are manufactured the same.  Mixing and matching can result in ride quality issues and decrease the life of the parts.

Saves Time & Money

Over buying the parts individually, or having to search different parts that are correct for your vehicle (because we did it for you!)

Part Details

  • Quantity: Pair

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Wheel (0:47)
    • Loosen the lug nuts
    • Raise and support the vehicle
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Rear Shock Absorber (1:56)
    • Remove the two 16mm bolts at the top of the shock absorber
    • Compress the shock
    • Pull out the top of the shock
    • Remove the bottom shock bolt with an 18mm wrench and a 15mm socket and ratchet
    • Pull out the shock
    • Hold the shock stud with vise grip pliers
    • Remove the 15mm nut from the top of the shock
    • Remove the shock mount from the shock
  3. step : Installing the Shock (4:46)
    • Remove the 15mm nut from the top of the new shock
    • Remove the washers from the new shock
    • Put the shock mount onto the new shock, with the rubber pointing out
    • Put the appropriate washer onto the shock stud
    • Fasten the 15mm nut onto the shock stud
    • Put the shock into place, top first
    • Compress the shock
    • Line up the shock with the lower control arm
    • Install the bottom shock bolt
    • Start the nut onto the bottom shock bolt
    • Fasten the bottom shock bolt with an 18mm wrench and a 15mm socket and ratchet
    • Tighten the bottom shock bolt to 53 foot-pounds of torque
    • Start the two 16mm bolts into the shock mount
    • Tighten the two 16mm bolts to 38 foot-pounds
  4. step : Installing the Wheel (6:40)
    • Put the wheel into place
    • Start the lug nuts
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 110 foot-pounds in a crossing pattern

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Rust Penetrant
  • Gloves

  • Pliers, Cutters & misc Wrenches

  • Vise Grip Pliers

  • Ratchets & Related

  • Ratchet
  • Torque Wrench
  • Socket Extensions
  • 1/2 Inch Breaker Bar

  • Sockets - Metric

  • 21mm Socket
  • 15mm Socket

  • Wrenches - Metric

  • 16mm Wrench
  • 17mm Wrench
  • 15mm Wrench
  • 18mm Wrench

3.0 / 5.0
2 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
0
0
0
1
almost perfect - they rattle
struts are as advertised. unfortunately they rattle when installed. the bottom end that the bolt goes through in the lower A frame is too skinny. there needs to be some sort of spacer. I had to put old shocks back in. they fit tight into lower A frame.
December 11, 2017
Purchased
7 months ago
Shocks
My purchase came in a timely manner. I installed them and car rides like new
October 3, 2017
Purchased
9 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 1 question Browse 1 question and 1 answer
Is it 76.95 for each shock or both?
Jean L on Apr 28, 2018
BEST ANSWER: That price is for a pair!

Vehicle Fit

  • 2005-2010 Chrysler 300 Rear Wheel Drive Rear Shock Absorber Pair (excluding SRT-8) for Models without Nivomat Suspension TRQ SBA60274
  • 2011-2016 Chrysler 300 (excluding SRT-8) Rear Shock Absorber Pair for Models without Nivomat Suspension TRQ SBA60274
  • 2011-2017 Dodge Challenger Rear Shock Absorber Pair for Models without Nivomat Suspension without Electronic Suspension TRQ SBA60274
  • 2006-2010 Dodge Charger Rear Wheel Drive Rear Shock Absorber Pair without Sport Suspension for Models without Nivomat Suspension (excluding Police Package) TRQ SBA60274
  • 2011-2016 Dodge Charger Rear Shock Absorber Pair for Models without Nivomat Suspension TRQ SBA60274
  • 2005-2008 Dodge Magnum Rear Wheel Drive Rear Shock Absorber Pair without Sport Suspension for Models without Nivomat Suspension (excluding Police Package) TRQ SBA60274

This part replaces:

  • Monroe 5797
  • KYB 349065
  • TRQ SBA60274
Part #: 1ASSP00565

TRQ
Brand #: SBA60274

How-to Video:

(07:10 min)