Our direct fit gas-charged shock absorbers help to restore your vehicle’s handling and ride quality to just like new.

To ensure the vehicle performs safely and as designed, we recommend replacing shocks & struts in pairs. If the damping rates are significantly different from side to side (like using different brand parts or mixing old with new) the vehicle body and wheel movement variations could cause handling irregularities. We also recommend performing an alignment after replacement. This will ensure proper tracking and protect your vehicle's tires from premature wear.

Direct Fit

Direct fit replacement; not only will the part fit correctly, but it will function correctly.  Many competitors combine applications to cut down on the amount of parts they have to carry. This can result in the following issues: incorrect vehicle height, poor response and an uncomfortable ride.

Rigorously Tested

Rigorously tested and made from higher quality materials than the competition. Our parts are built to have a longer life in any environment or road conditions.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Remove the wheel (0:48)
    • Loosen the lug nuts.
    • Raise and secure the vehicle.
    • Remove the lug nuts and the wheel.
  2. step : Remove the shocks. (1:15)
    • Jack up the control arm to alleviate tension from the shock.
    • Apply penetrating oil to the bolts on the shock.
    • Unbolt the top of the shocks by securing the shock with an adjustable wrench and using a 15 mm wrench to remove the nut.
    • Remove the 15mm nuts on the bottom of the shock.
    • Use an adjustable wrench to secure the bolt and a breaker bar to break it loose.
  3. step : Install the new shocks. (4:15)
    • Take the new shock and put the cushion and washers onto the end and put the shock into place.
    • Thread on the 15 mm nuts and torque them to 75 or 80 ft lbs.
    • Put the wheel back on and hand tighten the lug nuts.
    • Lower the vehicle and torque the lug nuts to 110-120 ft lbs in a star pattern.

Tools needed for replacement:

    Pliers, Cutters & misc Wrenches

  • Adjustable Wrench

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • Ratchet
  • Torque Wrench

  • Sockets - Metric

  • 21mm Socket
  • 22mm Socket

  • Wrenches - Metric

  • 15mm Wrench
  • 16mm Wrench
  • 17mm Wrench
  • 18mm Wrench
  • 19mm Wrench

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2002-2006 Chevy Avalanche 2500 Front Shock Absorber TRQ SBA60607
  • 2001-2003 Chevy Silverado 1500 HD Front Shock Absorber without Quadrasteer TRQ SBA60607
  • 2005-2006 Chevy Silverado 1500 HD Front Shock Absorber without Quadrasteer TRQ SBA60607
  • 2007 Chevy Silverado 1500 HD Classic Front Shock Absorber without Quadrasteer TRQ SBA60607
  • 1999-2004 Chevy Silverado 2500 Front Shock Absorber without Quadrasteer TRQ SBA60607
  • 2001-2010 Chevy Silverado 2500 HD Front Shock Absorber without Quadrasteer TRQ SBA60607
  • 2007 Chevy Silverado 2500 HD Classic Front Shock Absorber without Quadrasteer TRQ SBA60607
  • 2001-2010 Chevy Silverado 3500 Front Shock Absorber without Quadrasteer TRQ SBA60607
  • 2007 Chevy Silverado 3500 Classic Front Shock Absorber without Quadrasteer TRQ SBA60607
  • 2000-2013 Chevy Suburban 2500 Front Shock Absorber without Quadrasteer TRQ SBA60607
  • 2001-2003 GMC Sierra 1500 HD Front Shock Absorber without Quadrasteer TRQ SBA60607
  • 2005-2006 GMC Sierra 1500 HD Front Shock Absorber without Quadrasteer TRQ SBA60607
  • 2007 GMC Sierra 1500 HD Classic Front Shock Absorber without Quadrasteer TRQ SBA60607
  • 1999-2004 GMC Sierra 2500 Front Shock Absorber without Quadrasteer TRQ SBA60607
  • 2001-2010 GMC Sierra 2500 HD Front Shock Absorber without Quadrasteer TRQ SBA60607
  • 2007 GMC Sierra 2500 HD Classic Front Shock Absorber without Quadrasteer TRQ SBA60607
  • 2001-2010 GMC Sierra 3500 Front Shock Absorber without Quadrasteer TRQ SBA60607
  • 2007 GMC Sierra 3500 Classic Front Shock Absorber without Quadrasteer TRQ SBA60607
  • 2000-2013 GMC Yukon XL 2500 Front Shock Absorber without Quadrasteer TRQ SBA60607

This part replaces:

  • OE # 22187159
  • Monroe 37181
  • KYB 344383
  • TRQ SBA60607
Part #: 1ASHA00122

Out of Stock

TRQ
Brand #: SBA60607

How-to Video:

(07:58 min)