Our direct fit gas-charged shock absorbers help to restore your vehicle’s handling and ride quality to just like new.

Direct Fit

Direct fit replacement; not only will the part fit correctly, but it will function correctly.  Many competitors combine applications to cut down on the amount of parts they have to carry. This can result in the following issues: incorrect vehicle height, poor response and an uncomfortable ride.

Rigorously Tested

Rigorously tested and made from higher quality materials than the competition. Our parts are built to have a longer life in any environment or road conditions.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (0:44)
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Strut (1:08)
    • Hold the 19mm bolt at the bottom of the strut with a 19mm wrench
    • Remove the 19mm nut with a ratchet and a piece of pipe for leverage
    • Knock the bolt out with a punch and a hammer
    • Remove the three 14mm nuts from the top of the strut
    • Use a hammer to knock the strut out of place
    • Pull the strut down and out
  3. step : Installing the New Strut (2:29)
    • Push the new strut up into place
    • Insert the three 14mm nuts onto the top of the strut
    • Hammer the lower end of the strut into place
    • Push down on the wheel knuckle as you push the 19mm bolt into place
    • Tighten the 19mm nut onto the 19mm nut
    • Tighten the lower nut to 100 foot-pounds of torque
    • Tighten the upper nuts to 25 foot-pounds of torque
  4. step : Reattaching the Wheel (3:45)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern
    • Reattach the center cap

Tools needed for replacement:

    General Tools

  • Center Punch
  • Jack Stands
  • Floor Jack
  • Hammer

  • Ratchets & Related

  • A Piece of Pipe (for leverage)
  • Ratchet
  • Torque Wrench

  • Sockets - Metric

  • 21mm Socket
  • 19mm Socket
  • 14mm Socket

  • Wrenches - Metric

  • 19mm Wrench

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2004-2010 Infiniti QX56 Front Shock Absorber Driver or Passenger Side
  • 2005-2012 Nissan Armada Front Shock Absorber Driver or Passenger Side
  • 2004 Nissan Pathfinder Armada Front Shock Absorber Driver or Passenger Side
  • 2004-2015 Nissan Titan Front Shock Absorber Driver or Passenger Side

This part replaces:

  • OE # E61109FE4B
  • OE # 561107S126
  • Monroe 71358
  • KYB 341600
Part #: 1ASHA00057

Ships Same Day for orders placed by 4 P.M. ET

How-to Video:

(04:29 min)