Replaces

Shock Absorber Front Driver or Passenger Side - 1ASHA00102

Our direct fit gas-charged shock absorbers help to restore your vehicle’s handling and ride quality to just like new.

Direct Fit

Direct fit replacement; not only will the part fit correctly, but it will function correctly.  Many competitors combine applications to cut down on the amount of parts they have to carry. This can result in the following issues: incorrect vehicle height, poor response and an uncomfortable ride.

Rigorously Tested

Rigorously tested and made from higher quality materials than the competition. Our parts are built to have a longer life in any environment or road conditions.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Remove the shocks (1:00)
    • Use your 15 mm wrench and a 13mm socket and ratchet to remove the bolts.
    • Use penetrating oil and an adjustable wrench and vice grips to help remove the nuts and bolts.
  2. step : Install the new shocks (4:00)
    • Assemble the washers and grommets onto the shocks and put them into place, putting the rest of the washers and grommets into place.
    • Bolt into place nice and tight.
    • Use a jack to lift the control arm to bolt the shock on the rest of the way.

Tools needed for replacement:

    Materials, Fluids, and Supplies

  • Rust Penetrant

  • Pliers, Cutters & misc Wrenches

  • Adjustable Wrench

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • Ratchet

  • Sockets - Metric

  • 13mm Socket
  • 15mm Socket

  • Specialty Tools

  • Vise-Grips

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 1995-2001 Ford Explorer 4 Wheel Drive Front Shock Absorber Driver or Passenger Side excluding Adjustable Suspension
  • 1996-2001 Ford Explorer All Wheel Drive Front Shock Absorber Driver or Passenger Side excluding Adjustable Suspension
  • 2001-2005 Ford Explorer Sport Trac 4 Wheel Drive Front Shock Absorber Driver or Passenger Side
  • 1998-2011 Ford Ranger Front Shock Absorber Driver or Passenger Side for Models with Front Torsion Bar Suspension
  • 1998-2006 Mazda B3000 Truck Front Shock Absorber Driver or Passenger Side for Models with Front Torsion Bar Suspension
  • 1998-2006 Mazda B4000 Truck Front Shock Absorber Driver or Passenger Side for Models with Front Torsion Bar Suspension
  • 1997-2001 Mercury Mountaineer Front Shock Absorber for 4 Wheel Drive or All Wheel Drive Models Driver or Passenger Side

This part replaces:

  • OE # 5U2Z 18V124 MA
  • Monroe 32296
  • KYB 341302
Part #: 1ASHA00102

Ships Same Day for orders placed by 4 P.M. ET

How-to Video:

(07:08 min)