Specifications:

  • Brand New Ford Automatic Transmission Shifter Lever
  • Includes overdrive button
  • Original equipment part

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Removing the Steering Column Cover (1:24)
    • Press the detent ball in the cylinder by inserting a pick into the bottom of the column
    • Remove the three Phillips head screws from the holes in the column
    • Tilt the steering column down
    • Pop out the panel and remove it from the column
    • Unscrew the steering lever
    • Remove the bottom cover
    • Remove the upper cover
  2. step : Removing the Shift Lever (1:58)
    • Push down on the metal tab near the ignition cylinder to release the lever boot
    • Pop open the clamshell securing the wire harness with a pick and remove it
    • Tap out the retaining pin with a hammer and punch
    • Remove the shift lever
    • Remove the harness from its retainers
    • Disconnect the harness from the bottom of the steering column
  3. step : Installing the Shift Lever (4:29)
    • Send the connector down into the column and run it into place
    • Connect the connector
    • Reinstall the shift lever into the column
    • Reinstall the retaining pin
    • Snap the boot into place
  4. step : Installing the Steering Column Cover (6:05)
    • Reinstall the two halves of the steering column cover
    • Tighten the three Phillips head screws to the cover
    • Reinstall the ignition cylinder
    • Turn it back and remove the key
    • Screw in the tilt column switch
    • Reinstall the rear cover

Tools needed for replacement:

    General Tools

  • Hammer
  • Pick

  • Screwdrivers & Related

  • Phillips Head Screwdriver
  • Flat Blade Screwdriver

5.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
1
0
0
0
0
Easy Peezy
just reviewed the excellent YouTube video...easy - peezy with the 1A Auto part.
November 30, 2017
Purchased
7 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 1997-2004 Ford E150 Van Black Shifter Lever for Models with Automatic Transmission Ford OEM 4L3Z-7210-BAA
  • 1997-2004 Ford E250 Van Black Shifter Lever for Models with Automatic Transmission Ford OEM 4L3Z-7210-BAA
  • 1997-2004 Ford E350 Van Black Shifter Lever for Models with Automatic Transmission Ford OEM 4L3Z-7210-BAA
  • 1997-2002 Ford Expedition Black Shifter Lever for Models with Automatic Transmission Ford OEM 4L3Z-7210-BAA
  • 2004 Ford F150 Heritage Truck Black Shifter Lever for Models with Automatic Transmission Ford OEM 4L3Z-7210-BAA
  • 1997-2003 Ford F150 Truck Black Shifter Lever for Models with Automatic Transmission Ford OEM 4L3Z-7210-BAA
  • 2002 Lincoln Blackwood Black Shifter Lever for Models with Automatic Transmission Ford OEM 4L3Z-7210-BAA
  • 1998-2002 Lincoln Navigator Black Shifter Lever for Models with Automatic Transmission Ford OEM 4L3Z-7210-BAA

This part replaces:

  • Ford OEM 4L3Z-7210-BAA
  • OE # 4L3Z7210BAA
Only 2 left in stock
Part #: FDTSR00015

Ships Same Day for orders placed by 4 P.M. ET

Brand #: 4L3Z-7210-BAA

How-to Video:

(06:51 min)