Replaces

Serpentine Belt Tensioner with Pulley Dorman 419-213 - 1AEBT00052

Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

DORMAN SERPENTINE BELT TENSIONER: 419-213

This replacement serpentine belt tensioner is just what you need to get your vehicle in good working order again! If you are hearing a whirring noise from the front of your engine or if your belt often screeches you may be in need of a new belt tensioner. This part commonly wears out between 60,000 and 70,000 Miles. If it fails suddenly it can leave you stranded.

Specifications:

  • Brand New Dorman Serpentine Belt Tensioner
  • Includes Pulley
  • Brand new, not rebuilt or remanufactured
  • Replaces dealer part number: 2W7Z-6B209-AA, 2W7Z6B209AA
  • Direct replacement
  • Built to strict quality control standards
  • Fits models with V8 4.6L Engine only

This tensioner makes a great replacement and has good cost savings over a dealer unit.

Item Condition: New

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Serpentine Belt (0:37)
    • Familiarize yourself with the belt routing diagram
    • Attach a 3/8 inch drive ratchet to the serpentine belt tensioner
    • Pull the tensioner clockwise to loosen the belt
    • Pull the belt off
    • Loosen the tensioner
  2. step : Removing the Serpentine Belt Tensioner (1:45)
    • Remove the 10mm bolt from the serpentine belt tensioner
    • Pry the tensioner off with a flat blade screwdriver
  3. step : Installing the New Serpentine Belt Tensioner (2:14)
    • Thread a 10mm bolt through the new tensioner
    • Push the new tensioner into place
    • Tighten the 10mm bolt
  4. step : Reinstalling the New Serpentine Belt (2:54)
    • Loop the belt around the A/C pulley
    • Bring it around the tensioner pulley
    • Bring it around the water pump pulley
    • Bring it around the crank pulley
    • Bring it around the power steering pulley
    • Bring it around the idler pulley
    • Check that the belt is routed correctly
    • Attach the 3/8 inch drive ratchet to the tensioner
    • Turn the tensioner clockwise
    • Pull the belt onto the alternator
    • Release the tensioner

Tools needed for replacement:

    Ratchets & Related

  • Ratchet
  • 3/8 Inch Drive Ratchet
  • A Piece of Pipe (for leverage)

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2003-2011Ford Crown Victoria Ford Crown Victoria Serpentine Belt Tensioner with Pulley V8 4.6L Dorman 419-213
2003-2004Ford Mustang Ford Mustang Serpentine Belt Tensioner with Pulley V8 4.6L Dorman 419-213
2003-2011Lincoln Town Car Lincoln Town Car Serpentine Belt Tensioner with Pulley V8 4.6L Dorman 419-213
2003-2011Mercury Grand Marquis Mercury Grand Marquis Serpentine Belt Tensioner with Pulley V8 4.6L Dorman 419-213
2003-2004Mercury Marauder Mercury Marauder Serpentine Belt Tensioner with Pulley V8 4.6L Dorman 419-213
Part #: 1AEBT00052

Out of Stock

Dorman
Brand #: 419-213

How-to Video:

(05:17 min)