Replaces

Serpentine Belt Tensioner Pulley - 1AEIP00010

Frequently bought together

Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

This replacement Serpentine Belt Tensioner Pulley is just what you need to get your vehicle in good working order again!

Specifications:

  • Steel Construction
  • Outside Diameter: 90mm
  • Width: 30mm
  • Smooth (not grooved)
  • Replaces dealer part numbers: 1L2Z-8678-AB, XW4Z-6B209-AA, 2F2Z-6C348-AC, 6L2Z-6C348-A, E9SZ-8678-A, F5RZ-6C348-B, F7CZ-6C348-AA, XS4Z-6B209-AA, YS4Z-8678-BB, 4536173, 4792112, 10067479, 10141997, 12564505, 12564510, 4792112AD, 12552361, 12580771, 12580773, 15662645, 22521201, 25527750, 4792112AE, 4792410AC, 4792410AD, 2552775, 53002905, 1L2Z8678AB, XW4Z6B209AA, 2F2Z6C348AC, 6L2Z6C348A, E9SZ8678A, F5RZ6C348B, F7CZ6C348AA, XS4Z6B209AA, YS4Z8678BB
  • Direct replacement
  • Includes bearing

If you are hearing a whirring noise from the front of your engine or if your belt often screeches you may be in need of a new belt tensioner pulley or idler pulley. The tensioner pulley is typically used to redirect the serpentine belt, or help to apply tension against the belt tensioner.

Item Condition: New

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge.

  1. step : Removing the Wheel (0:41)
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Serpentine Belt (0:59)
    • Loosen the 13mm bolt at the top of the serpentine belt tensioner
    • Loosen the 13mm bolt at the bottom of the tensioner
    • Pull the serpentine belt off the pulleys
  3. step : Removing the Serpentine Belt Tensioner (1:43)
    • Remove the two 13mm bolts from the tensioner
    • Pull off the tensioner
  4. step : Removing the Idler Pulley from the Tensioner (2:00)
    • Pry off the idler pulley cap with a flat blade screwdriver
    • Remove the T50 Torx bolt from the idler pulley
    • Pull the idler pulley off the tensioner
  5. step : Installing the New Idler Pulley onto the Tensioner (2:21)
    • Put the new idler pulley onto the tensioner
    • Insert the T50 bolt into the idler pulley
  6. step : Reinstalling the Tensioner (2:46)
    • Put the tensioner into place
    • Start the two 13mm bolts into the tensioner
  7. step : Reinstalling the Serpentine Belt (2:58)
    • Familiarize yourself with the belt routing diagram
    • Feed the belt into place
    • Route the belt around the pulleys, following the diagram
    • Pull the tensioner down with a 1/2 inch ratchet
    • Tighten the two 13mm bolts into the tensioner
  8. step : Reattaching the Wheel (3:50)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds of torque in a crossing or star pattern

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Floor Jack

  • Ratchets & Related

  • Torque Wrench
  • Ratchet
  • 1/2 Inch Ratchet

  • Sockets - Metric

  • 19mm Socket
  • 13mm Socket

  • Star Drivers & Sockets

  • T50 Socket

5.00/ 5.0
1review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
0
0
0
0
Part for my car
The customer service was great.But unfortunately I didnt need the part that I ordered for my car after all. Thank you any way.
May 14, 2019
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
1985Buick Electra Buick Electra V6 4.3L (8th Vin Digit T) Serpentine Belt Tensioner Pulley
1986Buick Electra Buick Electra V6 3.8L (8th Vin Digit B) Serpentine Belt Tensioner Pulley
1987Buick Electra Buick Electra V6 3.8L (8th Vin Digit 3) Serpentine Belt Tensioner Pulley
2000-2005Buick Park Avenue Buick Park Avenue V6 3.8L (8th Vin Digit 1) Serpentine Belt Tensioner Pulley
1994-1995Chevy LLV (Postal Truck) Chevy LLV (Postal Truck) L4 2.2L (8th Vin Digit 4) Serpentine Belt Tensioner Pulley
1994-1997Chevy S10 Pickup Chevy S10 Pickup L4 2.2L (8th Vin Digit 4) Serpentine Belt Tensioner Pulley
2001Chrysler Sebring Chrysler Sebring V6 2.7L (8th Vin Digit U) Serpentine Belt Tensioner Pulley
2002-2006Chrysler Sebring Chrysler Sebring V6 2.7L (8th Vin Digit R) Serpentine Belt Tensioner Pulley
2003-2006Chrysler Sebring Chrysler Sebring V6 2.7L (8th Vin Digit T) Serpentine Belt Tensioner Pulley
2001Dodge Stratus Dodge Stratus V6 2.7L (8th Vin Digit U) Serpentine Belt Tensioner Pulley
2002-2006Dodge Stratus Dodge Stratus V6 2.7L (8th Vin Digit R) Serpentine Belt Tensioner Pulley
2003-2006Dodge Stratus Dodge Stratus V6 2.7L (8th Vin Digit T) Serpentine Belt Tensioner Pulley
1997-2002Ford Escort Ford Escort L4 2.0L (8th Vin Digit P) Serpentine Belt Tensioner Pulley
1994-1997GMC S-15 Sonoma GMC S-15 Sonoma L4 2.2L (8th Vin Digit 4) Serpentine Belt Tensioner Pulley
2000Lincoln LS Lincoln LS V8 3.9L (8th Vin Digit A) Serpentine Belt Tensioner Pulley
2000Lincoln LS Lincoln LS V6 3.0L (8th Vin Digit S) Serpentine Belt Tensioner Pulley
1997-1999Mercury Tracer Mercury Tracer L4 2.0L (8th Vin Digit P) Serpentine Belt Tensioner Pulley
1995-1998Oldsmobile 88 Olds 88 V6 3.8L (8th Vin Digit K) Serpentine Belt Tensioner Pulley
1996-1999Oldsmobile LSS Olds LSS V6 3.8L (8th Vin Digit 1) Serpentine Belt Tensioner Pulley
1987-1988Pontiac Bonneville Pontiac Bonneville V6 3.8L (8th Vin Digit 3) Serpentine Belt Tensioner Pulley
1996-2003Pontiac Bonneville Pontiac Bonneville V6 3.8L (8th Vin Digit 1) Serpentine Belt Tensioner Pulley
Part 1AEIP00010
In Stock


Order must be placed by 4pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.