Replaces
This part doesn’t fit a . Select from parts that fit.
1A Auto 1 Year Warranty
Frequently bought together
Genuine original equipment part (OEM) that was factory installed on your vehicle by the manufacturer.
Item Condition:
New
1 Year Warranty
This item is backed by our 1-year warranty. In the event this item should fail during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
What's up guys. I'm Andy from 1A Auto. In this video I'm going to show you how to replace the front seat switch button on this 2012 Ford Escape.
If you need this part or other parts for your vehicle click the link in the description and head over to 1aauto.com.
To remove this button I'm just going to use a trim tool. Get on the backside, pry it forward. You could also use as screwdriver or a plastic trim tool.
Slide it forward like that. Here's the old button, here's the new button from 1aauto.com. The shape is the same. Flip it over, the backside is the same. It has the same positions that retain to the switch itself. Get yours a 1aasuto.com, you'll be ready to rock and roll.
To install the button just line it up, and press it on.
Thanks for watching. Visit 1aauto.com for quality auto parts shipped to your door. The place for DIY auto repair and if you enjoy this video please click the subscribe button.
Tools used
Len: Hey friends, it's Len here at 1A Auto. Today, we're working on a 2011 Ford F-150. We're going to be doing something very simple, a seat switch, just tells the seat to go forward, backward, up, down, wiggle, wiggle, whatever. Right? If you need this part or any other part, you can always check us out at 1AAuto.com. Here we go.
Looks about the same, same length. That looks great, okay? On the inside, there's a little clip down here. There's one basically right there and there's one on the other side. There isn't really too much holding this puppy on, and that's probably why you're replacing it. Maybe it broke off just from light pressure. All I'm going to do is I'm going to use a nice, plastic tool. You can try to use something like a screwdriver, I wouldn't do that, but plastic. Right? Plastic, plastic, hopefully we don't mess up too much right here.
All I'm going to do is I'm going to try to wedge it. I'm going to try to pop it off. Let's see if it'll come, oh, seat works. It's coming, just taking its time. See about wiggling it here. All you got to do is get it to break free. There's just little clips inside here, so once I get it to break free, it's going to come right off. Okay? Not too worried about in exception of just the seat keeps moving around, so there's one. There's two. Okay?
We'll just do a quick comparison. As you can see, the insides are both the same. Right? I guess this one's upside down. Could turn it that way, now they're both the same. They got both the same clips, clips, clips, clips, clips. Looks great, great, perfect even to the point that I couldn't tell which one is which at this point, except for this one is brand-new, quality 1A Auto part, and the other one's original.
I'll put that one aside. I'm going to recycle it. I'm going to take this one. I'm just going to line it up and then I'm going to slide it right in. I should hear a couple of clicks, there we are. We'll test it. Perfect, there we go.
Thanks for watching. Visit 1AAuto.com for quality auto parts shipped to your door, the place for DIY auto repair. If you enjoy this video, please click the subscribe button.
Tools used
All right, friends. To get started, let's use a plastic trim tool. We're gonna come right underneath this edge right here, pry. We'll get this right out of the way. Let's get this new one on here. It's just gonna press right in, listen for a click. Here we are. Make sure it functions. Make sure it's definitely not falling off of there. Good to go.
