Replaces

Rocker Bottom & Cab Corner Repair Panel Kit - 1ARPS00011

Paint To Match Note:

"Paint to match finish" refers to a smooth, paintable surface. This item will be shipped unpainted but will be ready for paint. Final preparation is suggested for better paint coverage and adhesion. 

This part can also be installed without painting if desired. 

Warranty

Please inspect this part carefully prior to installation and contact us with any questions BEFORE attempting to install it. Due to the nature of this part, our 60-day warranty covers exchanges only. Parts that have been installed, neglected, or modified in any way are not eligible for this exchange.

4.3 / 5.0
22 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
15
3
2
0
2
received in great shape...
We installed both of panels and it fit like a glove.We used one of the cab's bottom and it came out excellent. I have spoken to a person who needs the panels and gave him the shipping invoice.
Thank you.
January 24, 2017
Purchased
1 year ago
Repair tech
These are very good for lots of options. They are priced good. Comes in complete kit. Can be put on the fast cheap way. Or trimed welded and finished out nicely. Ive done both ways. Have bought several sets. And will buy more.
April 22, 2017
Purchased
1 year ago
Rocker Bottom & Cab Corner
They did not cover the hole rocker panel. The body man had to add a piece to completely cover everything. They only covered the first lip. Which them cost me more money then if I would of gotten more expensive ones.
March 25, 2017
Purchased
1 year ago
Great product
The outer rocker panels on my 2003 Silverado were completely rusted out. I purchased these slip-on rocker covers and they fit like a glove. Very easy to put on with basic welding skills. The inner rocker panel on the one side of my truck had a bit more rust than I expected to find, so that one did require a little more fabrication than I expected. This is a project I should have probably done a year or two ago and it would have been a cakewalk.
September 21, 2017
Purchased
8 months ago
Worked great is not a prefect fit but I wasn't expecting it to be but it was thicker metal than I expected thanks worked great
August 21, 2017
Purchased
9 months ago
HEAVY DUTY PARTS
LOVE THE HEAVY STEEL PANELS AND FIT GREAT , VERY NICE PRODUCT AT A VERY GOOD PRICE
February 3, 2017
Purchased
1 year ago
the product was just as described. They are an exact fit made of good quality steel.
June 22, 2017
Purchased
1 year ago
value
Nice fit at a fair price.
Great value, fit and finish is very good
May 16, 2017
Purchased
1 year ago
Quality parts, better than local shops sell
Local shops wanted a bit more $$ and was a thinner guage meterial. Shape of the corners fit sane as OEM.
March 6, 2017
Purchased
1 year ago
Rockers and cab corners
I ordered these on line was skeptical about what kind of product I would be getting I received the parts in two days with free shipping and the quality was excellent , I will buy here every time with out a dought
November 19, 2017
Purchased
6 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 16 questions Browse 16 questions and 49 answers
how far up does the rocker panel come to.does it have the rolled corner at top?
mike u on Sep 13, 2015
BEST ANSWER: I can send you a picture
Video on the rocker install?
Bill J on Feb 13, 2016
BEST ANSWER: Go on google there are a couple videos that show the entire way to cut out the old and install the new kit.
How long are the rocker panels?
Chris N on Feb 21, 2016
BEST ANSWER: Don't have a length. They are a seam to seam length for the factory rocker.
What gauge is the panel?
cheyne h on Apr 1, 2016
BEST ANSWER: Our steel components are 18 gauge steel, compatible with OEM metal thickness for optimal welding ability
Can you send a couple pictures of tops and bottoms?
Jeremy G on Feb 13, 2016
BEST ANSWER: Hello, These are the only pics we have of the items. Sorry
Is this panel welded or sticks on with adhesive?
Dsriver on Dec 18, 2015
BEST ANSWER: Yoi will want to weld this item
Should I cut everything thing out and butt weld them in (rockers and cab corners) or will they fit over existing?
Jason C on Mar 24, 2016
BEST ANSWER: Put the new ones up to see how they fit. But you do have to cut all old out and clean it up. Do one side at a time and make sure doors are level and still shut properly.
1999 silverado rocker panels what gauge are they ?
Mario C on Apr 23, 2016
BEST ANSWER: They are 18 ga. ( .040) good quality, better than I expected and fit well.
This says 4 door extended cab. Is that the same as crew cab?
Chris N on Feb 21, 2016
BEST ANSWER: no, crew cab is 4 full size doors. Ext cab 4 door has the half rear suicide doors. Both have different cab lengths.
Are these painted, primed, or just bare steel?
Ktm272 on Jun 4, 2016
BEST ANSWER: these have a black primer base on them. Once welded they will need etch primer over your ground welds then sealer primer followed with paint
Can this be rivit and how much does this cover?
zach m on Feb 16, 2016
BEST ANSWER: Sure it can. I welded the rockers along the door seal area and used tec screws under the truck. I also filled the voids with a thick epoxy to seal it. If you pop rivet the panels on I would use a good sealer to weather proof the seams.
Do they come already black?
Tyler M on May 19, 2018
BEST ANSWER: yes, they are in black primer.
Are these panels made in America or of American steel?
Ray F on Apr 19, 2016
BEST ANSWER: We have a few different aftermarket companies build these parts specifically for us, as our 1A Auto house brand. They are manufactured to the same OEM specifications as the original part that came with your vehicle. If you have any further questions, please don't hesitate to ask.
How thick are these?
Nick A on Apr 11, 2016
BEST ANSWER: They are close to factory thickness. About a 1ft back from fender. Your original rockers get thinner than close to fender if you look there's a seam Remember these are basically a slip on rocker but with a little trimming on the end they fit nice and can be welded and finished nicely. Cab corners are nice.
Do you have ones that fit a single cab?
20zklotz on Mar 4, 2018
BEST ANSWER: We do not currently carry this part for your vehicle. You can try searching a website called Partfinder.com, which you can find here: http://www.partfinder.com. If you have any questions about other parts we carry, please feel free to give us a call or send us an email.
Do you have this kit for a crew cab?
Mark G on Jan 31, 2018
BEST ANSWER: We do not currently carry this part for your vehicle. You can try searching a website called Partfinder.com, which you can find here: http://www.partfinder.com. If you have any questions about other parts we carry, please feel free to give us a call or send us an email.

Vehicle Fit

  • 1999-2006 Chevy Silverado 1500 4 Door Extended Cab Rocker Bottom & Cab Corner Repair Panel Kit Smooth - Paint to Match Black
  • 2007 Chevy Silverado 1500 Classic 4 Door Extended Cab Rocker Bottom & Cab Corner Repair Panel Kit Smooth - Paint to Match Black
  • 2000-2004 Chevy Silverado 2500 4 Door Extended Cab Rocker Bottom & Cab Corner Repair Panel Kit Smooth - Paint to Match Black
  • 2001-2006 Chevy Silverado 2500 HD 4 Door Extended Cab Rocker Bottom & Cab Corner Repair Panel Kit Smooth - Paint to Match Black
  • 2007 Chevy Silverado 2500 HD Classic 4 Door Extended Cab Rocker Bottom & Cab Corner Repair Panel Kit Smooth - Paint to Match Black
  • 2001-2006 Chevy Silverado 3500 4 Door Extended Cab Rocker Bottom & Cab Corner Repair Panel Kit Smooth - Paint to Match Black
  • 2007 Chevy Silverado 3500 Classic 4 Door Extended Cab Rocker Bottom & Cab Corner Repair Panel Kit Smooth - Paint to Match Black
  • 1999-2006 GMC Sierra 1500 4 Door Extended Cab Rocker Bottom & Cab Corner Repair Panel Kit Smooth - Paint to Match Black
  • 2007 GMC Sierra 1500 Classic 4 Door Extended Cab Rocker Bottom & Cab Corner Repair Panel Kit Smooth - Paint to Match Black
  • 2000-2004 GMC Sierra 2500 4 Door Extended Cab Rocker Bottom & Cab Corner Repair Panel Kit Smooth - Paint to Match Black
  • 2001-2006 GMC Sierra 2500 HD 4 Door Extended Cab Rocker Bottom & Cab Corner Repair Panel Kit Smooth - Paint to Match Black
  • 2007 GMC Sierra 2500 HD Classic 4 Door Extended Cab Rocker Bottom & Cab Corner Repair Panel Kit Smooth - Paint to Match Black
  • 2001-2006 GMC Sierra 3500 4 Door Extended Cab Rocker Bottom & Cab Corner Repair Panel Kit Smooth - Paint to Match Black
  • 2007 GMC Sierra 3500 Classic 4 Door Extended Cab Rocker Bottom & Cab Corner Repair Panel Kit Smooth - Paint to Match Black

This part replaces:

  • Partslink RRP148
  • Partslink RRP149
  • Partslink RRP1407
  • Partslink RRP1406
Part #: 1ARPS00011