Replaces
This part doesn’t fit a . Select from parts that fit.
1A Auto Lifetime Warranty
Frequently bought together
Item Condition:
New
Attention California Customers:
WARNING: This product can expose you to chemicals including Formaldehyde and Toluene, which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Don from 1A Auto. I hope this how-to video helps you out, and the next time you need a part for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace the rear wiper arm on this 2002 Chevy Suburban. It's a similar procedure for this generation Suburban from 2000 to 2006, as well as some of the other GM SUVs: Tahoe and Yukon. You'll need a new wiper arm from 1AAuto.com and a 13mm socket, and a ratchet or wrench.
Pull back this cover and remove this 13mm nut. Then disconnect the washer hose, and turn the wiper arm until it breaks free and you can pull it from the stud. Pull back the wiper blade, push the tab, and slide the blade down and off the arm.
In the back is the old wiper arm; up front is the new one from 1A Auto. You can see they're identical, and they're going to fit exactly the same. Take your new wiper arm, push it onto the stud, and replace that 13mm nut. Put the cover down, reconnect your washer hose, and then slide your wiper blade back up onto the hook until it clicks. Then you're all set.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
Tools used
