Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Specifications:

  • Direct replacement
  • Plastic tanks with aluminum core
  • Dimensions:
    • Height: 24 5/16"
    • Width: 18 3/8"
    • Thickness: 1 1/4"
  • Built to strict quality control standards

Packaging:

Radiators may incur bent cooling fins or small imperfections during shipping or manufacturing. A few bent fins or small dents and scratches do not affect the fit or the function of the part. Neither our 60 Day satisfaction guarantee, nor the manufacturer's warranty, cover these types of insignificant damages.

Direct Fit Replacement

Core thickness equal to the OE part.  If radiator core is slightly thinner than the OEM, this can decrease overall performance and lifespan.

Premium Aluminum Core

Engineered for top performance.  Provides efficient cooling and heat-transfer.

100% Leak Tested

Built to strict quality control standards.

Item Condition: New

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Draining the Radiator (0:53)
    • Raise and support the vehicle on jack stands
    • Have a drain bucket ready
    • Open the petcock at the bottom passenger side of the radiator
    • Let the coolant drain
    • Close the petcock
  2. step : Removing the Radiator Fan Assembly (1:24)
    • Remove the clips on the upper radiator hose with needle nose pliers
    • Slide the hose off of both sides
    • Remove the hose
    • Disconnect the fan wiring harness
    • Remove the harness from the fan
    • Remove the 10mm bolts above the radiator hose fitting
    • Remove the 10mm bolt on the opposite end
    • List the fans up and out
  3. step : Removing the Radiator (2:35)
    • Pop up the radiator protectors
    • Remove the two 10mm bolts from the radiator bracket
    • Pry out the pins from the radiator covers with a pair of pliers
    • Remove the radiator brackets
    • Have a drain pan ready
    • Remove the clamp from the lower radiator hose
    • Pry out the push pin on the bottom of the insulator panel
    • Remove the 10mm bolt on the lower condenser brackets
    • Move the radiator back
    • Remove the 10mm bolts on both side
    • Remove the radiator
  4. step : Installing the Radiator (6:36)
    • Remove the covers on the radiator
    • Insert the radiator into place
    • Tighten the 10mm bolts on either side
    • Insert the condenser brackets into place
    • Reinstall the 10mm bolts on the bottom of the condenser
    • Insert the radiator into the radiator support
    • Insert the drain tube through the port
    • Reinstall the lower radiator hose and clamp
    • Reinstall the brackets on the top of the radiator
    • Tighten the 10mm bolts to the brackets
    • Reinstall the pins into the radiator guard
    • Reinstall the passenger side and then the driver side radiator covers
    • Reinstall the pin on the bottom of the radiator
  5. step : Installing the Radiator Fan Assembly (9:19)
    • Remove the wiring harness from the old fan
    • Hook the wire into the new assembly and connect the harness
    • Insert the assembly into place
    • Tighten the 10mm bolts to the radiator fan
    • Connect the fan wiring harness
    • Install the upper radiator hose
  6. step : Filling and Bleeding the Radiator (5:16)
    • Push down and rotate the cap counterclockwise
    • Insert a funnel
    • Fill the vehicle with the 50/50 mix of appropriate coolant and water
    • Start the vehicle
    • Set the fan to the lowest setting
    • Set the heat to the highest setting
    • Keep the coolant level up and monitor the temp on the gauge and out of the vents
    • Wait for a steady flow of heat, bubbles to stop, and steady coolant level
    • Remove the funnel
    • Reinstall the cap

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Drain Pan
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Gloves
  • Anti-Freeze

  • Pliers, Cutters & misc Wrenches

  • Side Cutters
  • Channel-Lock Pliers
  • Needle nose pliers

  • Screwdrivers & Related

  • Flat Blade Screwdriver

5.00/ 5.0
6 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
6
0
0
0
0
Csr
Good parts and csr they sale great parts with very good prices
August 6, 2017
My Experience...
My Experience With 1A Auto Haz Been Truly A Remarkable One! Time & Time Again Ive Received The Correct Part & On Time Shipping! Thankz 1A Auto!
August 25, 2017
Replacement Radiator
The replacement radiator I bought and ordered from 1A auto along with the instructional video that they uploaded on you tube was spot on. Well done guys. The parts were perfectly matched. The price was right. Im totally satisfied. Im spreading the word about you guys. Thanks Ronbo. From California
October 13, 2017
Radiator
Easy to get it and easy to install following the instructions in your video thanks
January 15, 2018
Radiator
It came in very quickly and was great quality and matched up perfectly with the original. They also provide a great video to show you how to install the radiator in the car .
January 21, 2018
Product
The product that I received worked out perfectly the only thing that it was missing was the drain line other than that it was fine.
July 12, 2018
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
what is the difference between a heavy duty radiator and the regular. how do I decide which to buy?
Wilbert J March 25, 2018
Its actually not a matter of which to choose, but which came on your vehicle. If you buy the incorrect one it will probably not fit properly.
Adam G March 27, 2018
Year Make Model Description
2005-2010Chrysler 300 Chrysler 300 Heavy Duty Radiator
2008Dodge Challenger Dodge Challenger Radiator
2006-2008Dodge Charger Dodge Charger Heavy Duty Radiator
2005-2008Dodge Magnum Dodge Magnum Heavy Duty Radiator
Part #: 1ARAD00954


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(11:53 min)