This cooling fan clutch assembly is a high quality aftermarket, ready to bolt on, replacement part. If your car is running hot a bad fan clutch could be the cause.

Features:

  • New, not rebuilt
  • Built to original specifications
  • Direct replacement
  • Extra deep fins for improved heat dissipation
  • High quality long life bearings
  • Not correct for diesel engines

This clutch engages when under hood temperatures warm to draw more air through your radiator. It disengages at speed so it does not rob horsepower.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Removing the Radiator Shield (0:26)
    • Remove the spark tire jack crank
    • Pry up the clips along the radiator shield with a Phillips screwdriver and flat blade screwdriver
    • Remove the clips
    • Remove the radiator shield
  2. step : Removing the Air Intake (2:25)
    • Remove the spare tire
    • Remove the two 10mm bolts from the throttle body cover
    • Lift the cover
    • Loosen the hose clamp on the air intake near the throttle body
    • Disconnect the breather hoses
    • Lift the intake tubing
    • Loosen the latch on the housing
    • Disconnect the two sensors on the air intake
    • Lift the air intake up and out
  3. step : Removing the Fan (3:39)
    • Insert a fan removal tool to the fan pulley bolts
    • Loosen the fan clutch with the tool and a ratchet
    • Spin the fan and nut off of the pulley
    • Remove the fan
  4. step : Removing the Radiator Hose and Fan Shroud (5:26)
    • Loosen the radiator hose clamp with pliers
    • Remove the 8mm bolts from the fan shroud
    • Lift the fan shroud up and out
  5. step : Removing the Radiator Fan Clutch (6:17)
    • Remove the four 13mm bolts from the fan clutch
    • Tap the clutch out from the fan
  6. step : Installing the Radiator Fan Clutch (7:14)
    • Attach the clutch to the fan blade
    • Tighten the four 13mm bolts to the fan blade
    • Torque the bolt to 15 foot-pounds
  7. step : Installing the Radiator Hose and Fan Shroud (7:32)
    • Feed the shroud and fan down in together
    • Spin the fan onto the pulley a few threads
    • Tighten the 8mm bolts to the fan shroud
    • Tighten the hose clamps to the upper radiator hose
  8. step : Installing the Fan (9:07)
    • Tighten the fan with the special tools
    • Hold the pulley and tighten the fan in
    • Torque the fan to 40 foot-pounds
  9. step : Installing the Air Intake (10:15)
    • Insert the air intake into place
    • Close the housing hatch
    • Connect the two sensor
    • Connect the two breather hoses
    • Tighten the hose clamp to the air intake hose
    • Place the throttle body cover over the throttle body
    • Tighten the two 10mm bolts to the cover
  10. step : Reinstalling the Radiator Cover (12:06)
    • Place the radiator cover on
    • Press the clips in
    • Push in the center of the clip to lock
    • Insert the jack handle into place

Tools needed for replacement:

    Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Ratchets & Related

  • Socket Extensions
  • Torque Wrench
  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

  • Sockets - Metric

  • 8mm Socket
  • 10mm Socket

  • Specialty Tools

  • Fan Clutch Wrench
  • Fan Pulley Wrench

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 1 question Browse 1 question and 3 answers
will this fit a 2000 ford lighting ?
dave c on Jun 18, 2016
BEST ANSWER: What engine does it have if it is the 5.4 L Triton motor yes that will fit it and it did fix our overheating problem

How-to Video:

(12:56 min)

Tools List:

    Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Ratchets & Related

  • Socket Extensions
  • Torque Wrench
  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

  • Sockets - Metric

  • 8mm Socket
  • 10mm Socket

  • Specialty Tools

  • Fan Clutch Wrench
  • Fan Pulley Wrench




Vehicle Fit

  • 1997-2003 Ford E150 Van Radiator Fan Clutch
  • 1997-2003 Ford E250 Van Radiator Fan Clutch
  • 1997-2003 Ford E350 Van Radiator Fan Clutch V8 5.4L
  • 2000-2003 Ford Excursion Radiator Fan Clutch V8 5.4L
  • 1997-2003 Ford Expedition Radiator Fan Clutch
  • 1997-2003 Ford F150 Truck Radiator Fan Clutch V8 4.6L
  • 1997-2003 Ford F150 Truck Radiator Fan Clutch V8 5.4L
  • 1997-1999 Ford F250 Light Duty Truck Radiator Fan Clutch V8 5.4L
  • 1999-2003 Ford F250 Super Duty Truck Radiator Fan Clutch V8 5.4L
  • 1999-2003 Ford F350 Super Duty Truck Radiator Fan Clutch V8 5.4L
  • 1998-2003 Lincoln Navigator Radiator Fan Clutch
Part #: 1ARFC00010

Ships Same Day for orders placed by 4 P.M. ET

We're here to help

1A Auto Parts

Customer Feedback

"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More