Replaces

Radiator Cooling Fan Blade Dorman 620-156 - 1ARFB00040

Specifications:

  • Brand New Radiator Fan Blade Assembly
  • Direct replacement
  • Built to strict quality control standards

Our electrical and electronic parts are subject to strict quality control testing .  Once the item has been installed or plugged in, it is no longer eligible for a refund.  The item may be eligible for replacement, only if it is found to have a manufacturing defect. Before purchasing, please ensure proper diagnosis of the failed original part is performed

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Removing the Radiator Shield (0:26)
    • Remove the spark tire jack crank
    • Pry up the clips along the radiator shield with a Phillips screwdriver and flat blade screwdriver
    • Remove the clips
    • Remove the radiator shield
  2. step : Removing the Air Intake (2:25)
    • Remove the spare tire
    • Remove the two 10mm bolts from the throttle body cover
    • Lift the cover
    • Loosen the hose clamp on the air intake near the throttle body
    • Disconnect the breather hoses
    • Lift the intake tubing
    • Loosen the latch on the housing
    • Disconnect the two sensors on the air intake
    • Lift the air intake up and out
  3. step : Removing the Fan (3:39)
    • Insert a fan removal tool to the fan pulley bolts
    • Loosen the fan clutch with the tool and a ratchet
    • Spin the fan and nut off of the pulley
    • Remove the fan
  4. step : Removing the Radiator Hose and Fan Shroud (5:26)
    • Loosen the radiator hose clamp with pliers
    • Remove the 8mm bolts from the fan shroud
    • Lift the fan shroud up and out
  5. step : Removing the Radiator Fan Blade (6:17)
    • Remove the four 13mm bolts from the fan clutch
    • Tap the clutch out from the fan
  6. step : Installing the Radiator Fan Blade (7:05)
    • Attach the clutch to the fan blade
    • Tighten the four 13mm bolts to the fan blade
    • Torque the bolt to 15 foot-pounds
  7. step : Installing the Radiator Hose and Fan Shroud (7:18)
    • Feed the shroud and fan down in together
    • Spin the fan onto the pulley a few threads
    • Tighten the 8mm bolts to the fan shroud
    • Tighten the hose clamps to the upper radiator hose
  8. step : Installing the Fan (8:52)
    • Tighten the fan with the special tools
    • Hold the pulley and tighten the fan in
    • Torque the fan to 40 foot-pounds
  9. step : Installing the Air Intake (10:00)
    • Insert the air intake into place
    • Close the housing hatch
    • Connect the two sensor
    • Connect the two breather hoses
    • Tighten the hose clamp to the air intake hose
    • Place the throttle body cover over the throttle body
    • Tighten the two 10mm bolts to the cover
  10. step : Reinstalling the Radiator Cover (11:52)
    • Place the radiator cover on
    • Press the clips in
    • Push in the center of the clip to lock
    • Insert the jack handle into place

Tools needed for replacement:

    Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Ratchets & Related

  • Socket Extensions
  • Torque Wrench
  • Ratchet

  • Screwdrivers & Related

  • Phillips Head Screwdriver

  • Sockets - Metric

  • 13mm Socket
  • 8mm Socket
  • 10mm Socket

  • Specialty Tools

  • Fan Clutch Wrench
  • Fan Pulley Wrench

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

How-to Video:

(12:41 min)

Tools List:

    Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Ratchets & Related

  • Socket Extensions
  • Torque Wrench
  • Ratchet

  • Screwdrivers & Related

  • Phillips Head Screwdriver

  • Sockets - Metric

  • 13mm Socket
  • 8mm Socket
  • 10mm Socket

  • Specialty Tools

  • Fan Clutch Wrench
  • Fan Pulley Wrench



This part replaces:

  • Dorman 620-156
  • OE # F85Z8600AA

Vehicle Fit

  • 1998-2004 Ford Expedition Radiator Cooling Fan Blade V8 5.4L 11 Blade Fan Dorman 620-156
  • 1998-2004 Ford Expedition Radiator Cooling Fan Blade V8 4.6L 11 Blade Fan Dorman 620-156
  • 2004 Ford F150 Heritage Truck Radiator Cooling Fan Blade V8 4.6L 11 Blade Fan Dorman 620-156
  • 2004 Ford F150 Heritage Truck Radiator Cooling Fan Blade V8 5.4L 11 Blade Fan Dorman 620-156
  • 2004 Ford F150 Heritage Truck 11 Blade Fan Radiator Cooling Fan Blade V6 4.2L Dorman 620-156
  • 1998-2003 Ford F150 Truck Radiator Cooling Fan Blade V8 5.4L 11 Blade Fan Dorman 620-156
  • 1998-2004 Ford F150 Truck Radiator Cooling Fan Blade V6 4.2L 11 Blade Fan Dorman 620-156
  • 1998-2004 Ford F150 Truck Radiator Cooling Fan Blade V8 4.6L 11 Blade Fan Dorman 620-156
  • 2005 Ford F150 Truck Radiator Cooling Fan Blade V8 5.4L 11 Blade Fan (Built Before 11/29/04 Production Date) Dorman 620-156
  • 2005 Ford F150 Truck Radiator Cooling Fan Blade 11 Blade Fan V8 4.6L (Built Before 11/29/04 Production Date) Dorman 620-156
  • 1998-1999 Ford F250 Light Duty Truck Radiator Cooling Fan Blade V8 5.4L 11 Blade Fan Dorman 620-156
  • 1998-1999 Ford F250 Light Duty Truck Radiator Cooling Fan Blade V8 4.6L 11 Blade Fan Dorman 620-156
  • 2002 Lincoln Blackwood Radiator Cooling Fan Blade V8 5.4L 11 Blade Fan Dorman 620-156
  • 1998-2004 Lincoln Navigator Radiator Cooling Fan Blade V8 5.4L 11 Blade Fan Dorman 620-156
Only 1 left in stock
Part #: 1ARFB00040

Ships Same Day for orders placed by 4 P.M. ET

Dorman
Brand #: 620-156

We're here to help

1A Auto Parts

Customer Feedback

"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More