Our aftermarket cooling fan assemblies are some of the highest quality replacements on the market! This radiator fan assembly is a complete, ready to bolt on, direct replacement part.

Specifications

  • New, not rebuilt, electric motor
  • Geometrically designed plastic blades for optimal circulation and uniform balance
  • Plastic shroud designed to ensure structural integrity and endurance for maximum performance
  • Performance tested
  • Replaces original assemblies that are melted or worn out
  • Comes with proper plug for trouble free installation

Now you can buy a high quality cooling fan assembly that is built to strict quality control standards. It is a great replacement and has substantial cost savings over a dealer unit.

Returns Note:

Our electrical and electronic parts are subject to strict quality control testing.  Once the item has been installed or plugged in, it is no longer eligible for a refund.  The item may be eligible for replacement, only if it is found to have a manufacturing defect. Before purchasing, please ensure proper diagnosis of the failed original part is performed.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Splash Shield (0:53)
    • Raise and secure the vehicle
    • Remove the 10mm bolts from the splash shield
  2. step : Removing the Radiator Fans (1:13)
    • Loosen the 10mm bolt on the transmission line bracket
    • Pull the transmission lines down
    • Remove the three 10mm bolts from the bottom of the radiator fans
    • Remove the two 10mm bolts from the top of the passenger side radiator fan
    • Disconnect the wiring harness from the passenger side radiator fan
    • Lift the passenger side radiator fan up and out
    • Disconnect the wiring harness from the driver side radiator fan
    • Remove the two 10mm bolts from the top of the driver side radiator fan
    • Lift the driver side radiator fan up and out
  3. step : Installing the New Radiator Fans (3:43)
    • Slide the new driver side radiator fan into place
    • Insert the two 10mm bolts into the top of the driver side radiator fan
    • Reconnect the wiring harness to the driver side radiator fan
    • Slide the new passenger side radiator fan into place
    • Reconnect the wiring harness to the passenger side radiator fan
    • Insert the three 10mm bolts into the bottom of the radiator fan
    • Tighten the 10mm bolt into the transmission line bracket
    • Insert the two 10mm bolts into the top of the passenger side radiator fan
  4. step : Reinstalling the Splash Shield (6:24)
    • Lift the splash shield into place
    • Insert the 10mm bolts into the splash shield
    • Lower the vehicle to the ground

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Jack Stands

  • Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

Year Make Model Description
1991-1999Buick LeSabre Buick LeSabre Radiator Cooling Fan Assembly Driver Side
1996Buick Park Avenue Buick Park Avenue Radiator Cooling Fan Assembly Driver Side
1991-1999Oldsmobile 88 Olds 88 Radiator Cooling Fan Assembly Driver Side
1996Oldsmobile 98 Olds 98 Radiator Cooling Fan Assembly Driver Side
1991-1999Pontiac Bonneville Pontiac Bonneville Radiator Cooling Fan Assembly Driver Side

This part replaces:

  • Partslink GM3112101
  • Hollander 674-00420
  • OE # 12365327
  • Dorman 620-625
  • DEPO 336-55010-100
Only 2 left in stock
Part #: 1ARFA00113


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(06:55 min)