Our aftermarket cooling fan assemblies are some of the highest quality replacements on the market! This radiator fan assembly is a complete, ready to bolt on, direct replacement part.

Specifications

  • New, not rebuilt, electric motor
  • Geometrically designed plastic blades for optimal circulation and uniform balance
  • Plastic shroud designed to ensure structural integrity and endurance for maximum performance
  • Performance tested
  • Replaces original assemblies that are melted or worn out
  • Comes with proper plug for trouble free installation
  • Fits all engine sizes

Now you can buy a high quality cooling fan assembly that is built to strict quality control standards. It is a great replacement and has substantial cost savings over a dealer unit.

Returns Note:

Our electrical and electronic parts are subject to strict quality control testing.  Once the item has been installed or plugged in, it is no longer eligible for a refund.  The item may be eligible for replacement, only if it is found to have a manufacturing defect. Before purchasing, please ensure proper diagnosis of the failed original part is performed.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Radiator Brace (1:00)
    • Remove the four 13mm bolts from the radiator brace
    • Pull the radiator brace aside
  2. step : Removing the Radiator Fan (1:32)
    • Disconnect the two radiator fan wiring harnesses
    • Pry the two clips off the top of the radiator fan with a flat blade screwdriver
    • Remove the four 10mm bolts from the radiator fan
    • Pry the four clips off the radiator fan with a flat blade screwdriver
    • Pull the radiator fan up and out
  3. step : Installing the New Radiator Fan (7:08)
    • Slide the new radiator fan into place
    • Place the radiator fan tab behind the bracket
    • Push the clips onto the radiator fan
    • Start the four 10mm bolts into the radiator fan
    • Tighten the 10mm bolts
    • Connect the radiator fan wiring harnesses
    • Put the two clips onto the top of the radiator fan
  4. step : Reinstalling the Radiator Brace (10:01)
    • Put the radiator brace into place
    • Insert the four 13mm bolts into the radiator brace

Tools needed for replacement:

    Ratchets & Related

  • Socket Extensions
  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 13mm Socket
  • 10mm Socket

5.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
0
0
0
0
what a great awesome company
the first one was damaged in shipping . called the company they instantly sent a new one AND NO CHARGE WOW AWESOME
October 21, 2017
Purchased
10 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 1993-1997 Chrysler Concorde Radiator Cooling Fan Assembly
  • 1994-1997 Chrysler LHS Radiator Cooling Fan Assembly
  • 1994-1996 Chrysler New Yorker Radiator Cooling Fan Assembly
  • 1993-1997 Dodge Intrepid Radiator Cooling Fan Assembly
  • 1993-1997 Eagle Vision Radiator Cooling Fan Assembly

This part replaces:

  • Partslink CH3115108
  • Hollander 674-445
  • OE # 4596212
  • Dorman 620-004
  • TYC 620160
  • DEPO 334-55011-000
Part #: 1ARFA00010


Order must be placed by 4pm ET

How-to Video:

(10:40 min)