Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Our aftermarket cooling fan assemblies are some of the highest quality replacements on the market! This radiator fan assembly is a complete, ready to bolt on, direct replacement part.

Specifications:

  • New, not rebuilt, electric motor
  • Geometrically designed plastic blades for optimal circulation and uniform balance
  • Plastic shroud designed to ensure structural integrity and endurance for maximum performance
  • Performance tested
  • Replaces original assemblies that are melted or worn out
  • Comes with proper plug for trouble free installation
  • Fits all engine sizes

Now you can buy a high quality cooling fan assembly that is built to strict quality control standards. It is a great replacement and has substantial cost savings over a dealer unit.

Our electrical and electronic parts are subject to strict quality control testing. Please ensure proper diagnosis of this item before purchasing as the item cannot be returned once installed or plugged in.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Remove the headlights (1:10)
    • Pop the hood and secure it.
    • Use a 7 mm socket to remove the bolts on the top of the headlight assembly.
    • Pull the headlight up and out.
    • Unplug the wiring harness.
  2. step : Remove the panel covering the front of the engine bay. (2:15)
    • Remove the push clips and 10 mm and 13 mm bolts securing the radiator mount panel.
    • If you’d like, you can disconnect the hood release cable, otherwise just tuck the panel aside out of the way.
    • Take care not to crimp the cable.
  3. step : Remove the radiator fan (4:38)
    • Pull out the locking tab and unplug the wiring connector from the radiator.
    • Remove the four 10 mm bolts anchoring the radiator fan.
    • Pull the fan up and out of the vehicle.
  4. step : Install the new fan (8:25)
    • Transfer the clip at the bottom of the fan to the new fan.
    • Clip the new fan down and into place.
    • Secure by bolting it down with your 10 mm socket and ratchet.
  5. step : Replace the panel covering the front of the engine bay (10:48)
    • Put the cover back into place.
    • Take care with the hood release cable.
    • Replace all the 10 and 13 mm bolts and push clips.
  6. step : Install the headlights (12:56)
    • Plug in the bulbs and wiring harnesses
    • Fit the headlights into place and secure with the two 7 mm bolts on each.

Tools needed for replacement:

    Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Ratchets & Related

  • Socket Extensions
  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 7mm Socket
  • 10mm Socket
  • 13mm Socket

  • Wrenches - Metric

  • 7mm Wrench

5.00/ 5.0
1review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
0
0
0
0
Radiator cooling fan assembly at 1aauto
I ordered a radiator cooling fan assembly at 1aauto.com over the phone. I received excellent, knowledgeable and courteous service. The part arrived within 4 days of shipment, was an exact OEM fit at installation and has been performing well since installed. The radiator cooling fan assembly was equal to or better than an OEM part at a superior price. Thanks.
May 18, 2018
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
Do I need a special climate control fan assembly for my 1999 Crysler Concord LXI or would a standard aftermarket assembly work?
Brian K April 18, 2016
This fan will work the same as the OEM part without modifications.
Brian F April 18, 2016
How many amps does each fan draw?
Shaun M May 10, 2018
I dont have the exact draw of these fans. Our parts are designed to be exact replacements for what came with the vehicle, so as long as your year, make, and model match up with our listing, these will definitely fit and function just like the original. Please let us know if you have any other questions.
Adam G May 10, 2018
Year Make Model Description
1999-2004Chrysler 300M Chrysler 300M Radiator Cooling Fan Assembly
1998-2004Chrysler Concorde Chrysler Concorde Radiator Cooling Fan Assembly
1999-2001Chrysler LHS Chrysler LHS Radiator Cooling Fan Assembly
1998-2004Dodge Intrepid Dodge Intrepid Radiator Cooling Fan Assembly
Part #: 1ARFA00003


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(13:48 min)