This replacement power window motor is just what you need to get your vehicle in good shape again! If your window regulator is good, but the motor is burned out, then this is the part for you.

Specifications:

  • Fits RH (Passenger Side)
  • Replaces dealer part number: 88987652
  • Direct replacement
  • New not remanufactured
  • Built to strict quality control standards

NOTE: Due to production line variations, some vehicles were equipped with reversed motors.  Please compare photo to vehicle before purchase

This window motor makes a great replacement and has substantial cost savings over a dealer unit.

Returns Note:

Our electrical and electronic parts are subject to strict quality control testing.  Once the item has been installed or plugged in, it is no longer eligible for a refund.  The item may be eligible for replacement, only if it is found to have a manufacturing defect. Before purchasing, please ensure proper diagnosis of the failed original part is performed.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Remove door panel. (0:55)
    • For more detailed instructions see our other videos.
  2. step : Remove water shield. (1:52)
    • Carefully remove the water shield.
    • Take care not to rip it, as it keeps water from getting into your door.
  3. step : Unbolt Regulator (2:46)
    • Plug your power windows back in and tape it up.
    • Lift up the window and tape it up out of the way.
    • Remove the bolts with your wrench or socket and ratchet.
    • Loosen up your wiring harness.
    • Feed your harness in and it comes right out.
    • Take out the motor first and then the regulator.
  4. step : Install the new regulator (4:10)
    • Attach the new motor to the regulator using the bolts that came with it.
    • Replace the regulator and motor back into their original positions, regulator first.
    • Feed the harness back through.
    • Bolt the track back in.
    • Tighten the regulator bolts and your power window motor bolts.
  5. step : Test (6:30)
    • Test the to make sure the wiring is hooked up correctly.
    • Untape and attach the window.
    • Test again to make sure the window isn’t straining and everything works.
  6. step : Re-assemble (7:38)
    • Replace the water shield.
    • Reassemble the door panel.
    • For more detailed instructions refer to our other videos.

Tools needed for replacement:

    General Tools

  • Putty Knife

  • Materials, Fluids, and Supplies

  • Cloth Rags

  • Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

  • Sockets - Metric

  • 10mm Socket

  • Specialty Tools

  • Door Panel Removal Tool

  • Torx Drivers & Sockets

  • T27 Torx Driver

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

Year Make Model Description
1999-2005Buick Century Buick Century Power Window Motor Front or Rear Passenger Side
1999-2004Buick Regal Buick Regal Power Window Motor Front or Rear Passenger Side
2003-2005Chevy Impala Chevy Impala Power Window Motor Front or Rear Passenger Side
1998-2002Oldsmobile Intrigue Olds Intrigue Power Window Motor Front or Rear Passenger Side
1999-2002Oldsmobile Intrigue Olds Intrigue Power Window Motor Front or Rear Passenger Side
1999-2003Pontiac Grand Prix Pontiac Grand Prix 4 Door Power Window Motor Front or Rear Passenger Side

This part replaces:

  • Hollander 617-00468, 617-00472
  • OE # 88987652
  • Dorman 742-125
Part #: 1AWPM00055


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(09:58 min)