Replaces
Frequently bought together
Item Condition:
New
Attention California Customers:
WARNING: This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
Returns: Parts with electrical components cannot be returned once installed.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace the switch pack on this 1996 Chevy Tahoe. We show you on the driver side master switch pack. However the power window switch on the passenger side is a similar procedure. The items you'll need for this include a new switch pack from 1AAuto.com and a flat blade screwdriver.
Start off by prying up the back of your switch pack. You just want to pry it up with your screwdriver so you can get your fingers underneath, then just lift it up, and then slide it back.
Now, using your flat blade screwdriver, push the tabs on these harnesses, and pull them free. Now you just want to pry out this tab on the switch pack, and then just pull on the switch pack while you do it. Then it will pop up and out.
On the left is the old switch pack; on the right is the new one from 1A Auto. You can see they're identical, and they're going to fit exactly the same.
To install your new switch pack, you want to push the front end in first, then just kind of pull back right here, and push the back end in. Once it's pushed down into place, you just want to reconnect those two harnesses. Now, slide this tab forward, and then push the back end of your switch panel down into place. You're all set.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
Tools used
We're gonna lift up on this plastic piece here, starting from the rear. There we are. Let's disconnect all this wiring. Switch right here. Just pull that right out of there. So now that we've got this off of here, we have a clear view of the window switch. Let's go ahead and get that out of there. If you were to look right down along here, you're gonna see a slot. We're gonna come just like this with our pocket screwdriver, or small screwdriver, and then you can pop it right off of there. Once you've compared your new switch to your old switch, you're gonna go ahead and install it. We'll put it just like this, and you can see that little locking tab. That's gonna slide into this groove right there. You wanna make sure that your window switches are lining up with their holes. And then just give it a nice squeeze. Push on those buttons, and just make sure that the switch doesn't fall back out. If it falls back out, then more than likely you're not locked in correctly.
Now it's gonna be time to get this reinstalled back into the door panel. We'll connect in our speaker wire. Super important. We've got our mirror wire. Click it in. Give it a tug. My wire situated here. Gonna turn this. Slide it right in. This one slides right in. Everything is nice and secured. You wanna make sure the speaker wire is going through this slot, and not over here. Otherwise, it could get a pinch coming across there. To install this, you're gonna notice you have a hooky-doo right here towards the front area and then you have your clips right here that are gonna latch right there. That being said, come in high, and put in the front area first with the hooky-doo. And then right here, give it a nice push. Couple loving bonks. Perfect.
Now it's gonna be time to test our work. So you wanna make sure you have the key in the on position. The vehicle does not have to be running. Let's go ahead and try to put this window down, and then back up. Battery's a little low in this vehicle. Perfect. Passenger side. Oh, yeah. Let's go ahead and test the mirror. Right side. Yep. Awesome.
Tools used
