Replaces

Power Steering Oil Cooler Dorman 918-308 - 1ASTB00013

This power steering oil cooler is just what you need to bring back the safety and integrity of your vehicle's steering!

Specifications:

  • Power Steering Oil Cooler
  • Replaces dealer part number: 52029306AG
  • Direct replacement
  • Built to strict quality control standards

This cooler makes a great replacement and has good cost savings over a dealer unit.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wind Tray (0:45)
    • Remove the lower wind tray by prying out the clips with side cutters
    • Raise and support the vehicle on jack stands if you like
  2. step : Disconnecting the Cooler Lines (1:51)
    • Have a drain pan ready
    • Make note of the hoses position, as one is pressurized and one is return
    • Remove the clamp on the cooler hose
    • Work the line back and forth
    • Repeat the process for the other
  3. step : Removing the Power Steering Cooler (3:00)
    • Remove the 10mm nuts from the bolts on the cooler brackets
    • Remove the power steering cooler
  4. step : Installing the Power Steering Cooler (5:15)
    • Insert the power steering cooler into place
    • Tighten the 10mm nuts to the power steering cooler
  5. step : Connecting the Cooler Lines (5:46)
    • Replace the hose clamps with screw style band clamps if needed
    • Insert the hoses into their correct slots
    • Tighten the hose clamp
  6. step : Reinstalling the Wind Tray (6:31)
    • Insert the tray into place
    • Press the retainer pins into their appropriate slots
  7. step : Refilling the Fluid (7:14)
    • Remove the cap from the power steering reservoir
    • Insert a clean funnel
    • Top off the fluid with the appropriate fluid
  8. step : Bleeding the System (7:38)
    • Partially support the vehicle to take weight off the tire
    • Start the vehicle with the power steering cap off
    • Leave the funnel in to contain fluid and have a drain pan ready
    • Run the wheels back and forth a few time to the lock position
    • Recheck the fluid level
    • Repeat the steps a few times
    • When finished, reinstall the cap
    • Lower the vehicle from the stands
    • Test drive the vehicle to test the steering

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Drain Pan
  • Floor Jack
  • Funnel

  • Materials, Fluids, and Supplies

  • Gloves
  • Transmission Fluid
  • Cloth Rags
  • Safety Glasses

  • Pliers, Cutters & misc Wrenches

  • Side Cutters

  • Ratchets & Related

  • Ratchet

  • Sockets - Metric

  • 10mm Socket

  • Wrenches - Metric

  • 10mm Wrench

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2002-2008 Dodge Ram 1500 Truck Power Steering Oil Cooler V6 3.7L Dorman 918-308
  • 2002-2008 Dodge Ram 1500 Truck Power Steering Oil Cooler V8 5.7L Dorman 918-308
  • 2002-2008 Dodge Ram 1500 Truck Power Steering Oil Cooler V8 4.7L Dorman 918-308
  • 2003-2009 Dodge Ram 2500 Truck Power Steering Oil Cooler V8 5.7L Dorman 918-308
  • 2010 Dodge Ram 2500 Truck Power Steering Oil Cooler L6 6.7L Diesel Dorman 918-308
  • 2003-2009 Dodge Ram 3500 Truck Power Steering Oil Cooler V8 5.7L Dorman 918-308
  • 2010 Dodge Ram 3500 Truck Power Steering Oil Cooler L6 6.7L Diesel Dorman 918-308
  • 2011-2012 Ram 2500 Truck Power Steering Oil Cooler L6 6.7L Diesel Dorman 918-308
  • 2011-2012 Ram 3500 Truck Power Steering Oil Cooler L6 6.7L Diesel Dorman 918-308

This part replaces:

  • OE # 52029306AG
  • Dorman 918-308
Part #: 1ASTB00013

Out of Stock

Dorman
Brand #: 918-308

How-to Video:

(09:43 min)