Replaces
This part doesn’t fit a . Select from parts that fit.
1A Auto Lifetime Warranty
Frequently bought together
Part Details
Complete Repair in One Purchase - Stop searching for parts individually and complete your repair with a customized kit or set from DIY Solutions.
High-Quality Parts from Trusted Brands - DIY Solutions' kits and sets are selected from the best automotive brands and include hard-to-find and even obsolete parts you may need for your vehicle.
Guaranteed Fit - DIY Solutions ensures its selected parts are quality-tested to guarantee fit and function.
Assemblies may include halogen or incandescent test bulbs that should be replaced before installation.
Features and Benefits
Item Condition:
New
Attention California Customers:
WARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii and Alaska.
Shipping is not available to a P.O. Box, APO/FPO/DPO addresses, US Territories, or Canada for this item.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii.
Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike Green. I'm one of the owners of 1A Auto. I want to help you save time and money repairing and maintaining your vehicle. I'm going to use my 20-plus years experience restoring and repairing cars and trucks like this to show you the correct way to install parts from 1AAuto.com. The right parts installed correctly. That's going to save you time and money. Thank you and enjoy the video.
In this video, we'll be replacing headlights in this 2004 Pontiac Grand Prix. Basically, it's the same as all 2004 to 2008 Grand Prix's. This will only require a small screwdriver and a pair of pliers.
Now, maybe you need to replace your headlight if it was broken or damaged, and looking at this car, it's a pretty decent looking car, but you know, maybe you just want to freshen things up a little bit. Now, here you can see that new driver's side headlight is a lot clearer, a little bit nicer looking. Okay, now and here with both lights and the parking lights changed. This is a 120,000-mile car. It looks like we just took about 50 to 60,000 miles off of it. You know, getting some new lights and a little bit of time, and with these lights, it is a very little bit of time, as you'll see, and you can give your Grand Prix a face lift.
Okay, so let's get to how easy this really is. There's a white tab here. You pull up on it. You only pull up a certain amount as you can see here with the light out, and you can see it when you push down. That's how it locks in, and then, there's the hole, but if you pull up too far, it actually locks again. So, you just want to pull up, looks like about 1/2 inch. So, you pull that tab up about 1/2 inch. Sorry, I blocked it there for you a little bit, and then, you pull the inside kind of out and your light comes out. Then, you flip the light forward, and it's a single harness. You just squeeze. There's a little lock on it, and you pull, and then, you can pull the light out and service the bulbs or switch the light or whatever you want to do.
If you are going to be switching your headlight assemblies, you want to pull this little clip off. You see that rusty medal clip there and I'll show it to you in a second. You are going to need to swap that over. On our new lights, it didn't have that clip, so I'll show you how to swap that over. Basically, you need a little screwdriver, but you just need a little electrical screwdriver or something that's small and round. Just kind of get that clip started. Now, if you're from Texas or Arizona, you probably won't have to mess with a rusty clip. The thing will probably just pull out with a set of pliers. But, I work it in there. You know, us being from up here in the northeast in the rust belt, things tend to stick together a little more. So, I'm just working that screwdriver in there a little bit and getting it started. See here in a second. Probably could have cut a little bit of this out, but hey. It's not all glamour.
So, you can see there I just kind of got that started, and I'm going to use some pliers, and just kind of work it back and forth and pull it the rest of the way out. There it goes. Then, on your new harness, it really is pretty simple. Just kind of put it in there and slide it right in. Okay, then, now we can reinstall. Now, these are two locating tabs. That pin goes into that hole, and then on the outside, there's a locating pin in there, and it goes into that hole. Okay. So first, we plug in the harness again, and then, clip it on. Now, you want to make sure your wires are clear of anywhere they get pinched.
Okay, so now, we're going to get it in place, and you want to put the outside into the fender first. Then, we'll change, and then, you can look down in and get those pins lined up into their holes. Then, basically just kind of give a push onto the inside. Clip it in. Here I clip it in, and then push your white holding tab down, and you're set. You've installed a nice new headlight on your Grand Prix.
This video was brought to you by www.1AAuto.com. We hope we helped you out. We are your source for quality replacement parts and the best service on the Internet. Feel free to call us toll free 888-844-3393. We're here for you on the Internet and in person. Thank you very much.
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike Green. I'm one of the owners of 1A Auto. I want to help you save time and money repairing or maintaining your vehicle. I'm going to use my 20-plus years experience restoring and repairing cars and trucks like this to show you the correct way to install parts from 1AAuto.com. The right parts installed correctly: that's going to save you time and money. Thank you and enjoy the video.
In this video we're going to replace the parking and fog lights in a 2004 Grand Prix, basically the same as any 2004-2008 Grand Prix and before we do that a little bit of introduction. Maybe you need to do your fog light because it was damaged. It happens a lot. But maybe you just want to give your Grand Prix a little bit of a face lift. As you can see here, there's one side with a nice new headlight and parking and fog light, and now let's see both sides. There we go. On a 120,000-mile vehicle, we just took probably 90, 100,000 miles off of the front end. With a little bit of time and new headlights and fog lights, you too can give your Grand Prix a face lift.
Fog and parking light changing for a 2004-2008 Grand Prix is pretty much as easy as it looks. There are two Phillips screws: one there and one here. You may have to press pretty good to get them at first. Then you kind of have to jiggle the light a little bit and it comes out. On the back top, give it a twist. Then, the fog light is a halogen. You want to be careful not to touch that bulb with your fingers because the oil will get on there and basically fry the bulb. If you need to change out your bulbs I definitely recommend doing it outside, doing it now and then plugging the bulb into the new fog light. There are two tabs here. Pull one, pull the other, and then work it off.
Here's the new light. I'm going to show you one thing. Sometimes if you buy these new bulbs they'll actually come with a washer. On these lights they have a built-in rubber washer so you'll actually probably want to take this off because you won't be able to force it in there. That's what we did. Take that washer off and actually you can see right in there and see how this goes in. You've got to kind of work it through that rubber grommet. Then twist. We'll plug the fog light in first. Then we'll put the new light in. Twist, and remove this pine needle. Back the light in there. Insert one screw, and two screws. It's in place. So in a few minutes you've gone from that to that . a little mini face lift.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
