This replacement pitman arm is just what you need to ensure the safety and integrity of your vehicle's suspension and steering.

Specifications:

  • Kit includes (1) Pitman Arm Assembly as shown
  • 4 Groove design
  • Replaces one of many dealer part numbers including: 12471379
  • Connects at steering box and to relay arm
  • Direct replacement
  • Built to strict quality control standards

Your pitman arm connects the steering box to the center link and the rest of the steering linkage. Over time the greasable ends and even the holes in the arm can wear causing loose connections and a sloppy steering feel.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Removing the Pitman Arm (0:29)
    • Loosen the three 21mm bolts holding the steering box to the frame
    • Remove the 21mm castle nut on the ball joint end of the pitman arm
    • Remove the pitman arm from the steering linkage with a two jaw puller or a pickle fork
    • Pull the pitman arm out of the steering linkage
    • Hold the steering box in place
    • Remove the 34mm nut on the pitman arm
    • Insert the two jaw puller to the pitman arm
    • Pry the pitman arm off of the steering box
    • Remove the pitman arm from the truck
  2. step : Installing the Pitman Arm (6:00)
    • Grease the pitman arm with a grease gun
    • Insert the pitman arm up into place
    • Attach the washer and 34mm bolt
    • Tighten the 34mm bolt
    • Press the pitman arm into the steering linkage
    • Hand-tighten the castle nut
    • Hand-tighten the three 21mm bolts into the steering box
    • Tighten the steering box bolts
    • Tighten the 19mm castle nut
    • Insert the cotter pin into the castle nut
    • Bend the cotter pin

Tools needed for replacement:

    Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Screwdrivers & Related

  • Pry Bar

  • Sockets - Metric

  • Complete Metric Socket Set

  • Specialty Tools

  • 2 Jaw Gear Puller
  • Grease Gun
  • Pickle Fork
  • Acetylene torch

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 1 question Browse 1 question and 1 answer
will this work on a 2000 chevy z71 crew cab?
wayne V on Mar 11, 2018
BEST ANSWER: As long as your original pitman arm has 4 grooves it will fit. Please check out 1ASPA00008 if yours requires 3 grooves

Vehicle Fit

  • 2002-2006 Cadillac Escalade Pitman Arm for Models with 4 Groove Pitman Arm
  • 2003-2006 Cadillac Escalade ESV Pitman Arm for Models with 4 Groove Pitman Arm
  • 2002-2006 Cadillac Escalade EXT Pitman Arm for Models with 4 Groove Pitman Arm
  • 2002-2006 Chevy Avalanche 1500 Pitman Arm for Models with 4 Groove Pitman Arm
  • 2003-2008 Chevy Express 2500 Van Pitman Arm for Models with 4 Groove Pitman Arm
  • 2003-2008 Chevy Express 3500 Van Pitman Arm for Models with 4 Groove Pitman Arm
  • 1999-2006 Chevy Silverado 1500 Pitman Arm for Models with 4 Groove Pitman Arm
  • 2007 Chevy Silverado 1500 Classic Pitman Arm for Models with 4 Groove Pitman Arm
  • 1999-2000 Chevy Silverado 2500 Pitman Arm for Models with 4 Groove Pitman Arm
  • 2000 Chevy Suburban 1500 Pitman Arm for Models with 4 Groove Pitman Arm
  • 2001-2006 Chevy Suburban 1500 Pitman Arm for Models with 4 Groove Pitman Arm
  • 2000 Chevy Suburban 2500 Pitman Arm for Models with 4 Groove Pitman Arm
  • 2000 Chevy Tahoe Pitman Arm for Models with 4 Groove Pitman Arm excluding Z71 Models
  • 2001-2006 Chevy Tahoe Pitman Arm for Models with 4 Groove Pitman Arm
  • 2003-2008 GMC Savana 2500 Van Pitman Arm for Models with 4 Groove Pitman Arm
  • 2003-2008 GMC Savana 3500 Van Pitman Arm for Models with 4 Groove Pitman Arm
  • 1999-2006 GMC Sierra 1500 Pitman Arm for Models with 4 Groove Pitman Arm
  • 2007 GMC Sierra 1500 Classic Pitman Arm for Models with 4 Groove Pitman Arm
  • 1999-2000 GMC Sierra 2500 Pitman Arm for Models with 4 Groove Pitman Arm
  • 2000 GMC Yukon Pitman Arm for Models with 4 Groove Pitman Arm excluding Denali Models
  • 2001-2006 GMC Yukon Pitman Arm for Models with 4 Groove Pitman Arm
  • 2000 GMC Yukon XL 1500 Pitman Arm for Models with 4 Groove Pitman Arm
  • 2001-2006 GMC Yukon XL 1500 Pitman Arm for Models with 4 Groove Pitman Arm
  • 2000 GMC Yukon XL 2500 Pitman Arm for Models with 4 Groove Pitman Arm
  • 2003-2007 Hummer H2 Pitman Arm for Models with 4 Groove Pitman Arm

This part replaces:

  • OE # 12471379
  • Moog K6536
Part #: 1ASPA00009

Ships Same Day for orders placed by 4 P.M. ET

How-to Video:

(09:03 min)